- Product range
- Service
- Contact us
- About us
- News
Domestic fans
Industrial fans
Single-room air handling units with heat recovery
Air handling units 
Smoke extraction and ventilation
Ventilation accessories
Ventilation ducts and fittings
Air distribution
Measurement and control technology
Ventilation sets and vents- Selection method:
- Air capacity:
- Pressure:
Operating point
- Air capacity: --
- Pressure: ---
Print version
Search results
| Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Current | Maximum air flow | Sound pressure level | Frequency | RPM | Speed | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Cable cross section | Transported air temperature | Transported air temperature | Voltage | Maximum air flow | Weight | ErP | Maximum air flow | Motor IP rating | PM 2.5 Ratio | Current | Power | Cable cross section | * | Transported air temperature | Max. air flow at air flow direction (direct air flow) | Max. air flow at air flow direction (perpendicular air flow) | Spigot |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Mix-E 400-4D | 400 | Inline | mixed-flow | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | 1.78 | 3740 | - | 50 | 1490 | - | - | - | 24 | 590 | - | - | IPX4 | 3 | 58 | - | - | - | - | -25...+60 | - | 1039 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso 160-2Е | 230 | Inline | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | 1.16 | 730 | - | 50 | 2600 | - | - | Exhaust, Supply | 6.28 | 335 | -25 +40 | - | IPX4 | - | 37.9 | - | - | - | - | - | - | 203 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso Box-F 150 G4-H13-Carbon L V2 min | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.18 | 205 | - | 50 | 700 | min | - | Supply | 14.87 | 40 | - | D | IPX4 | 1 | 15 | - | - | - | - | -25…+40 | - | 57 | - | 2018 | - | - | 93 | - | - | - | - | - | - | - | - |
| Iso Box-F 150 G4-H13-Carbon L V2 max | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.21 | 285 | - | 50 | 1200 | max | - | Supply | 14.87 | 48 | - | D | IPX4 | 1 | 25 | - | - | - | - | -25…+40 | - | 79 | - | 2018 | - | - | 92 | - | - | - | - | - | - | - | - |
|
Axis-QR 200 2Е 50 Hz |
230 | wall mounting | axial | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 860 | - | 50 | 2300 | - | - | Exhaust, Supply | - | 55 | - | - | IPX4 | 1 | 48 | - | - | - | - | -30...+60 | - | 239 | 2.8 | - | - | IP24 | - | 0.26 | - | - | - | - | - | - | - |
|
Axis-QR 200 2Е 60 Hz |
230 | wall mounting | axial | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 875 | - | 60 | 2550 | - | - | Exhaust, Supply | - | 61 | - | - | IPX4 | 1 | 49 | - | - | - | - | -30...+50 | - | 243 | 2.8 | - | - | IP24 | - | 0.28 | - | - | - | - | - | - | - |
| Tower-H 450 6E | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 1.25 | 4380 | - | 50 | 940 | - | - | Exhaust | 45.6 | 268 | -30…+60 | - | IPX4 | 1 | 50 | - | - | - | - | - | - | 1217 | - | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
|
Valeo-BF 60/100 (1 speed) |
220-240 | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | 0.14 | 63 | - | 50 | - | I | - | Exhaust | - | 25 | +50 | - | IP55 | - | 36 | - | - | 3х1.5 | - | - | - | 18 | - | - | - | - | - | - | - | - | - | - | - | - | - |
|
Valeo-BF 60/100 (2 speed) |
220-240 | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | 0.18 | 102 | - | 50 | - | II | - | Exhaust | - | 44 | +50 | - | IP55 | - | 46 | - | - | 3x1.5 | - | - | - | 28 | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Turbo 250 min | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | plastic | no | no | no | 0.54 | 1070 | - | 50/60 | 1955 | - | - | Exhaust, Supply | 7.83 | 125 | 60 | – | IPX4 | 1 | 44 | - | - | - | - | - | 220-240 | 297 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Turbo 250 max | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | plastic | no | no | no | 0.79 | 1360 | - | 50/60 | 2440 | - | - | Exhaust, Supply | 7.83 | 177 | 60 | – | IPX4 | 1 | 51 | - | - | - | - | - | 220-240 | 378 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso-VK 800 6D | 400 | Inline | centrifugal | 800 | for round air ducts | - | - | aluzinc | no | no | yes | 8.7 | 21860 | - | 50 | 965 | - | - | Exhaust | 275 | 4000 | –25…+120 | – | IPX4 | 3 | 62 | - | - | - | - | - | - | 6072 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - |
| Iso-K 450 6D | 400 | Inline | centrifugal | 450 | for round air ducts | - | - | galvanized steel | no | yes | yes | 1.33 | - | - | 50 | 920 | - | 4991 | Exhaust | - | 454 | -20…+120 | - | IP54 | 3 | 49 | - | - | - | - | - | - | - | 105 | - | 1386 | IP54 | - | - | - | - | - | - | - | - | - |
| Box-F 70x40 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | 700 | 400 | galvanized steel | no | no | no | 6.00 | 6450 | - | 50 | 1320 | - | - | Exhaust, Supply | - | 3630 | -25...+40 | - | IPX4 | 3 | 65 | - | - | - | - | - | - | 1792 | 60.0 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Tower-H EC 225 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | 0.80 | 1290 | - | 50/60 | 2400 | - | - | Exhaust | - | 101 | -25...+60 | – | IPX4 | 1 | 47 | - | - | - | - | - | - | 358 | 8 | 2018 | - | IP55 | - | - | - | - | - | - | - | - | - |
|
Axis-F 250 2D 50 Hz |
400 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1060 | - | 50 | 2600 | - | - | Exhaust, Supply | - | 80 | - | - | IPX4 | 3 | 51 | - | - | - | - | -30...+60 | - | 294 | 3.9 | - | - | IP44 | - | 0.22 | - | - | - | - | - | - | - |
|
Axis-F 250 2D 60 Hz |
400 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1150 | - | 60 | 3030 | - | - | Exhaust, Supply | - | 92 | - | - | IPX4 | 3 | 52 | - | - | - | - | -30...+50 | - | 319 | 3.9 | - | - | IP44 | - | 0.24 | - | - | - | - | - | - | - |
| Axis-Q 800 6D | 400 | wall mounting | axial | 800 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 25000 | - | 50 | 915 | - | - | Exhaust, Supply | - | 1850 | - | - | IPX4 | 3 | 67 | - | - | - | - | -30...+60 | - | 6945 | 44.0 | - | - | IP54 | - | 3.7 | - | - | - | - | - | - | - |
| Tower-V EC 355 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | 9.36 | 3830 | - | 50/60 | 1550 | - | - | Exhaust | - | 669 | -25...+50 | – | IPX4 | 1 | 51 | - | - | - | - | - | - | 1064 | 23 | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
| Box 100x50 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 10500 | - | 50 | 900 | - | - | Exhaust, Supply | 120.0 | 1198 | - | - | IPX4 | 3 | 69 | - | - | - | -25...+50 | - | - | - | - | 2018 | - | IP44 | - | 2.7 | - | - | - | - | - | - | - |
| Iso Box-F 150 G4 L V2 min | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.19 | 230 | - | 50 | 700 | min | - | Supply | 13.96 | 44 | - | C | IPX4 | 1 | 15 | - | - | - | - | -25…+40 | - | 64 | - | 2018 | - | - | 31 | - | - | - | - | - | - | - | - |
| Iso Box-F 150 G4 L V2 max | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.23 | 340 | - | 50 | 1200 | max | - | Supply | 13.96 | 52 | - | C | IPX4 | 1 | 25 | - | - | - | - | -25…+40 | - | 94 | - | 2018 | - | - | 23 | - | - | - | - | - | - | - | - |
| Box-R 100/80x2 V3(1 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.32 | - | - | 50 | 1400 | - | 97 | Exhaust, Supply | 3.1 | 20 | 50 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | - | - | - | - | - | - |
| Box-R 100/80x2 V3(2 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.34 | - | - | 50 | 1800 | - | 138 | Exhaust, Supply | 3.1 | 26 | 50 | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - |
| Box-R 100/80x2 V3(3 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.4 | - | - | 50 | 2600 | - | 176 | Exhaust, Supply | 3.1 | 45 | 50 | C | IPX4 | - | 44 | - | - | - | - | - | - | - | - | - | 49 | - | - | - | - | - | - | - | - | - | - |
| Iso-RB EC 315 | - | Inline | centrifugal | 315 | - | - | - | aluzinc | yes | - | - | 2.32 | 3053 | - | 50/60 | 2360 | - | - | - | - | 531 | - | – | IPX4 | 1 | 47 | - | - | - | - | -25...+55 | 230 | 848 | 47 | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
| Helix 225х102 4E | 230 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | 1.98 | 1480 | - | 50 | 1330 | - | - | Exhaust, Supply | 11.2 | 395 | -40 +70 | - | IPX4 | - | 69 | - | - | - | - | - | - | 411 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Box-FI 60x30 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 600 | 300 | galvanized steel | no | no | yes | 6.45 | 2950 | - | 50 | 1210 | - | - | Exhaust, Supply | - | 1240 | - | - | IPX4 | 1 | 51 | - | - | - | - | -25...+50 | - | 820 | 56 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Tower-H 310 4E (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.64 | 2265 | - | 50 | 1420 | - | - | Exhaust | 14.2 | 141 | -25…+50 | - | IPX4 | 1 | 47 | - | - | - | - | - | - | 629 | - | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
| Tower-H 310 4E (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.87 | 2425 | - | 60 | 1740 | - | - | Exhaust | 14.2 | 195 | -25…+50 | - | IPX4 | 1 | 49 | - | - | - | - | - | - | 674 | - | – | - | IP54 | - | - | - | - | - | - | - | - | - |
| Box EC 40x20-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | 810 | - | 50/60 | 2470 | - | - | Exhaust, Supply | 8.3 | 91 | - | B | IPX4 | 1 | 43 | - | - | - | - | -25...+50 | - | 225 | - | 2018 | - | IP55 | - | 0.69 | - | - | - | - | - | - | - |
|
Centro-MZ 100 L 50 Hz |
220-240 | ceiling mounting, wall mounting | centrifugal | 100 | for round air ducts | - | - | galvanized steel | no | no | no | 0.19 | 230 | - | 50 | 2732 | - | - | Exhaust, Supply | 2.5 | 42 | - | C | IPX4 | 1 | 35 | - | - | - | - | -25...+55 | - | 64 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Centro-MZ 100 L 60 Hz |
220-240 | ceiling mounting, wall mounting | centrifugal | 100 | for round air ducts | - | - | galvanized steel | no | no | no | 0.23 | 250 | - | 60 | 3258 | - | - | Exhaust, Supply | 2.5 | 51 | - | C | IPX4 | 1 | 36 | - | - | - | - | -25...+50 | - | 69 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Turbo 100 min | 230 | Inline | mixed-flow | 100 | for round air ducts | - | - | plastic | no | no | no | 0.10 | 170 | - | 50/60 | 1980 | - | - | Exhaust, Supply | 1.68 | 23 | 60 | C | IPX4 | 1 | 27 | - | - | - | - | - | - | 47 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Turbo 100 max | 230 | Inline | mixed-flow | 100 | for round air ducts | - | - | plastic | no | no | no | 0.11 | 220 | - | 50/60 | 2545 | - | - | Exhaust, Supply | 1.68 | 25 | 60 | C | IPX4 | 1 | 32 | - | - | - | - | - | - | 61 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso-VK 500 4E | 230 | Inline | centrifugal | 500 | for round air ducts | - | - | aluzinc | no | no | yes | 10.6 | 9100 | - | 50 | 1410 | - | - | Exhaust | 96.3 | 1500 | –25…+120 | – | IPX4 | 1 | 57 | - | - | - | - | - | - | 2528 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - |
| Iso-K 400 6E | 230 | Inline | centrifugal | 400 | for round air ducts | - | - | galvanized steel | no | yes | yes | 1.71 | - | - | 50 | 930 | - | 2915 | Exhaust | - | 362 | -20…+120 | - | IP54 | 1 | 48 | - | - | - | - | - | - | - | 87 | - | 810 | IP54 | - | - | - | - | - | - | - | - | - |
| Box-F 50x30 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | 500 | 300 | galvanized steel | no | no | no | 1.70 | 2350 | - | 50 | 1300 | - | - | Exhaust, Supply | - | 855 | -20...+50 | - | IPX4 | 3 | 56 | - | - | - | - | - | - | 653 | 33.0 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Box 100x50 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 15000 | - | 50 | 1370 | - | - | Exhaust, Supply | 126.0 | 4300 | - | - | IPX4 | 3 | 70 | - | - | - | - | -30...+60 | - | 4167 | - | 2018 | - | IP44 | - | 6.8 | - | - | - | - | - | - | - |
|
Axis-F 400 4Е 50 Hz |
230 | Inline | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 3580 | - | 50 | 1380 | - | - | Exhaust, Supply | - | 180 | - | - | IPX4 | 1 | 53 | - | - | - | - | -30...+60 | - | 995 | 8.1 | - | - | IP24 | - | 0.82 | - | - | - | - | - | - | - |
|
Axis-F 400 4Е 60 Hz |
230 | Inline | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 3890 | - | 60 | 1655 | - | - | Exhaust, Supply | - | 240 | - | - | IPX4 | 1 | 54 | - | - | - | - | -30...+50 | - | 1081 | 8.1 | - | - | IP24 | - | 1.08 | - | - | - | - | - | - | - |
|
Axis-F 550 4D 50 Hz |
400 | Inline | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 9700 | - | 50 | 1350 | - | - | Exhaust, Supply | - | 750 | - | - | IPX4 | 3 | 64 | - | - | - | - | -30...+60 | - | 2695 | 13.9 | - | - | IP24 | - | 1.5 | - | - | - | - | - | - | - |
|
Axis-F 550 4D 60 Hz |
400 | Inline | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 7380 | - | 60 | 1605 | - | - | Exhaust, Supply | - | 600 | - | - | IPX4 | 3 | 64 | - | - | - | - | -30...+50 | - | 2050 | 13.9 | - | - | IP24 | - | 1.1 | - | - | - | - | - | - | - |
| Tower-V 450 4Е | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 3.35 | 6180 | - | 50 | 1400 | - | - | Exhaust | 41 | 749 | -30…+60 | - | IPX4 | 1 | 58 | - | - | - | - | - | - | 1717 | - | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
| Centro-M EC 355 | 230 | Inline | centrifugal | 355 | for round air ducts | - | - | polymer-coated steel | yes | no | no | 3.07 | 3450 | - | 50/60 | 2768 | - | - | Exhaust, Supply | - | 693 | - | – | IPX4 | 1 | 62 | - | - | - | - | - | - | 958 | 15.8 | 2018 | - | - | - | - | - | - | - | -25...+60 | - | - | - |
| Iso Box-F 100 G4-F8 V2 min | 230 | ceiling mounting, wall mounting | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.15 | 150 | - | 50 | 700 | min | - | Supply | 14.16 | 33 | - | E | IPX4 | 1 | 14 | - | - | - | - | -25…+40 | - | 42 | - | - | - | - | 94 | - | - | - | - | - | - | - | - |
| Iso Box-F 100 G4-F8 V2 max | 230 | ceiling mounting, wall mounting | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.19 | 175 | - | 50 | 1200 | max | - | Supply | 14.16 | 41 | - | E | IPX4 | 1 | 23 | - | - | - | - | -25…+40 | - | 49 | - | - | - | - | 93 | - | - | - | - | - | - | - | - |
| Box-R-80/80x4 V3(1 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.32 | - | - | 50 | 1400 | - | 88 | Exhaust, Supply | 3.4 | 20 | 50 | C | IPX4 | - | 32 | - | - | - | - | - | - | - | - | - | 24 | - | - | - | - | - | - | - | - | - | - |
| Box-R-80/80x4 V3(2 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.34 | - | - | 50 | 1800 | - | 130 | Exhaust, Supply | 3.4 | 26 | 50 | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | 36 | - | - | - | - | - | - | - | - | - | - |
| Box-R-80/80x4 V3(3 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.4 | - | - | 50 | 2600 | - | 162 | Exhaust, Supply | 3.4 | 45 | 50 | C | IPX4 | - | 43 | - | - | - | - | - | - | - | - | - | 45 | - | - | - | - | - | - | - | - | - | - |
| Iso-RB EC 125 | - | Inline | centrifugal | 125 | - | - | - | aluzinc | yes | - | - | 0.59 | 444 | - | 50/60 | 3270 | - | - | - | - | 78 | - | B | IPX4 | 1 | 39 | - | - | - | - | -25...+55 | 230 | 123 | 12 | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso-ZS 315 4E max | 230 | - | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | 4.18 | - | - | 50 | 1430 | - | 3520 | Exhaust, Supply | 38.0 | 931 | -20…+50 | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | – | - | - | - | - | - | - | - | - | - | - | - |
| Box-FI 50x25 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | 500 | 250 | galvanized steel | no | no | yes | 0.67 | 1490 | - | 50 | 930 | - | - | Exhaust, Supply | - | 274 | - | - | IPX4 | 3 | 38 | - | - | - | - | -20...+60 | - | 414 | 40.5 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Axis-QRA 250 50 Hz |
220-240 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1070 | - | 50 | 1300 | - | - | Exhaust, Supply | - | 68 | -30 … +40 | - | IPX4 | 1 | 37 | - | - | - | - | - | - | 297 | 4.10 | - | - | IP44 | - | 0.48 | - | - | - | - | - | - | - |
|
Axis-QRA 250 60 Hz |
220-240 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1050 | - | 60 | 1450 | - | - | Exhaust, Supply | - | 76 | -30 … +40 | - | IPX4 | 1 | 37 | - | - | - | - | - | - | 292 | 4.10 | - | - | IP44 | - | 0.51 | - | - | - | - | - | - | - |
| S-Vent 500х229-7.5-6D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | 17 | 14960 | - | 50 | 955 | - | - | Exhaust, Supply | 86 | 7500 | +60 | - | IP54 | 3 | 78 | - | - | - | - | - | - | 4156 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - |
| Сentro-M 450 (50 Hz) | 220-240 | Inline | centrifugal | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | 2.89 | 5300 | - | 50 | 1265 | - | - | Exhaust, Supply | - | 665 | - | - | IPX4 | 1 | 65 | - | - | - | - | -40...+70 | - | 1472 | 27.26 | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Сentro-M 450 (60 Hz) | 220-240 | Inline | centrifugal | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | 5.40 | 6280 | - | 60 | 1560 | - | - | Exhaust, Supply | - | 1250 | - | - | IPX4 | 1 | 73 | - | - | - | - | -25..+60 | - | 1745 | 27.26 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Axis-QR EC 450 | 230 | wall mounting | axial | 465 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 7400 | - | 50/60 | 1400 | - | - | Supply and exhaust | - | 380 | - | - | IPX5 | 1 | 65 | - | - | - | - | –25…+60 | - | 2056 | 6.3 | - | - | IP55 | - | 1.7 | - | - | - | - | - | - | - |
| - | 230 | Inline | mixed-flow | 355 | for round air ducts | - | - | polymer-coated steel | no | no | no | 3.42 | 3340 | - | 50 | 1480 | - | - | - | 22 | 578 | - | - | IPX4 | 1 | 57 | - | - | - | - | -25...+60 | - | 928 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso-V 400 4Е (50 Hz) | 230 | Inline | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | aluminium, aluzinc | no | yes | yes | 2.4 | - | - | 50 | 1370 | - | - | Exhaust, Supply | 39 | 480 | - | - | IPX4 | 1 | 51 | 3750 | 3535 | - | - | - | - | - | - | 2018 | - | IP44 | - | - | - | - | - | -40...+80 | 982 | 1042 | - |
| Iso-V 400 4Е (60 Hz) | 230 | Inline | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | aluminium, aluzinc | no | yes | yes | 3.15 | - | - | 60 | 1460 | - | - | Exhaust, Supply | 39 | 700 | - | - | IPX4 | 1 | 52 | 4310 | 4015 | - | - | - | - | - | - | 2018 | - | IP44 | - | - | - | - | - | -40...+55 | 1115 | 1197 | - |
| Iso Box-F 150 G4-Carbon V2 min | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.41 | 320 | - | 50 | 700 | min | - | Supply | 17.08 | 92 | - | D | IPX4 | 1 | 16 | - | - | - | - | -25…+40 | - | 89 | - | 2018 | - | - | 47 | - | - | - | - | - | - | - | - |
| Iso Box-F 150 G4-Carbon V2 max | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.55 | 430 | - | 50 | 1200 | max | - | Supply | 17.08 | 117 | - | D | IPX4 | 1 | 27 | - | - | - | - | -25…+40 | - | 119 | - | 2018 | - | - | 41 | - | - | - | - | - | - | - | - |
| S-Vent 180х74-0.55-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | 1.6 | 1030 | - | 50 | 1360 | - | - | Exhaust, Supply | 13.5 | 550 | +60 | D | IP54 | 3 | 64 | - | - | - | - | - | - | 286 | - | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
| Tower-H 225 4E | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.22 | 738 | - | 50 | 1400 | - | - | Exhaust | 8.8 | 49 | -25…+50 | C | IPX4 | 1 | 45 | - | - | - | - | - | - | 205 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Valeo 35/60 (1 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | 0.12 | 35 | 27* | 50 | - | I | - | Exhaust | - | 15 | +50 | - | - | - | - | - | - | - | - | - | 220-240 | 10 | - | - | - | IP55 | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - | - |
|
Valeo 35/60 (2 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | 0.14 | 63 | 36* | 50 | - | II | - | Exhaust | - | 25 | +50 | - | - | - | - | - | - | - | - | - | 220-240 | 18 | - | - | - | IP55 | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - | - |
| Tower-V 310 4D (60 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.32 | 2442 | - | 60 | 1550 | - | - | Exhaust | 19 | 202 | -25…+50 | - | IPX4 | 3 | 48 | - | - | - | - | - | - | 678 | - | – | - | IP54 | - | - | - | - | - | - | - | - | - |
| Tower-V 310 4D (50 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.29 | 2300 | - | 50 | 1410 | - | - | Exhaust | 19 | 155 | -25…+50 | - | IPX4 | 3 | 47 | - | - | - | - | - | - | 639 | - | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
|
Box-I 60x30 4D 50 Hz |
400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | 0.52 | 2530 | - | 50 | 1360 | - | - | Exhaust, Supply | 43.5 | 230 | - | - | IPX4 | 3 | 45 | - | - | - | - | -25…+70 | - | 703 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Box-I 60x30 4D 60 Hz |
400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | 0.53 | 2630 | - | 60 | 1600 | - | - | Exhaust, Supply | 43.5 | 235 | - | - | IPX4 | 3 | 47 | - | - | - | - | -25…+65 | - | 731 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso Box-F 150 G4-H13 L | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.28 | 310 | - | 50/60 | 1300 | - | - | Supply | 14.17 | 59 | - | C | IPX4 | 1 | 25 | - | - | - | - | -25…+40 | - | 86 | - | 2018 | - | - | 98 | - | - | - | - | - | - | - | - |
| Box-D 150 (50 Hz) | 230 | Inline | centrifugal | 150 | for round air ducts | - | - | galvanized steel | no | no | no | 0.5 | - | - | 50 | 2465 | - | 485 | Exhaust | 6.5 | 112 | -25 +50 | - | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Box-D 150 (60 Hz) | 230 | Inline | centrifugal | 150 | for round air ducts | - | - | galvanized steel | no | no | no | 0.6 | - | - | 60 | 2550 | - | 531 | Exhaust | 6.5 | 136 | -25 +50 | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Extero EC 150 | 200-277 | outdoor mounting | - | 150 | - | - | - | polymer-coated steel | - | - | - | - | 550 | - | 50/60 | 2840 | - | - | - | 4,7 | 92 | -25…+40 | B | IPX4 | 1 | 56 | - | - | - | - | - | - | 153 | - | 2018 | - | IP55 | - | 0.75 | - | - | - | - | - | - | - |
| Iso-ZS 250 4E | 230 | - | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | 1.06 | - | - | 50 | 1320 | - | 1520 | Exhaust, Supply | 30.0 | 243 | -20…+50 | - | IPX4 | 1 | 44 | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | - | - | - | - | - | - |
| Box-FI 40x20 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 400 | 200 | galvanized steel | no | no | yes | 1.32 | 1440 | - | 50 | 1350 | - | - | Exhaust, Supply | - | 295 | - | - | IPX4 | 1 | 42 | - | - | - | - | -25...+40 | - | 400 | 29 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Axis-QA 200 50 Hz |
220-240 | wall mounting | axial | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 405 | - | 50 | 1300 | - | - | Exhaust, Supply | - | 43 | -30 … +40 | - | IPX4 | 1 | 33 | - | - | - | - | - | - | 113 | 2.82 | - | - | IP44 | - | 0.28 | - | - | - | - | - | - | - |
|
Axis-QA 200 60 Hz |
220-240 | wall mounting | axial | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 470 | - | 60 | 1615 | - | - | Exhaust, Supply | - | 33 | -30 … +40 | - | IPX4 | 1 | 33 | - | - | - | - | - | - | 131 | 2.82 | - | - | IP44 | - | 0.21 | - | - | - | - | - | - | - |
| S-Vent 400х183-5.5-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | 11 | 10175 | - | 50 | 1430 | - | - | Exhaust, Supply | 69.5 | 5500 | +60 | - | IP54 | 3 | 80 | - | - | - | - | - | - | 2827 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - |
| Сentro-M 250 (50 Hz) | 220-240 | Inline | centrifugal | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.85 | 1420 | - | 50 | 2790 | - | - | Exhaust, Supply | - | 194 | - | - | IPX4 | 1 | 50 | - | - | - | - | -25...+45 | - | 394 | 8.4 | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Сentro-M 250 (60 Hz) | 220-240 | Inline | centrifugal | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | 1.05 | 1520 | - | 60 | 2860 | - | - | Exhaust, Supply | - | 240 | - | - | IPX4 | 1 | 51 | - | - | - | - | -25…+45 | - | 422 | 8.4 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Axis-QR EC 250 max | 230 | wall mounting | axial | 260 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 1850 | - | 50/60 | 2950 | - | - | Supply and exhaust | - | 115 | - | - | IPX5 | 1 | 57 | - | - | - | - | –25…+60 | - | 514 | 2 | - | - | IP55 | - | 0.85 | - | - | - | - | - | - | - |
| Iso-Mix-E 355-4D | 400 | Inline | mixed-flow | 355 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 1.77 | 3430 | - | 50 | 1490 | - | - | Exhaust, Supply | 33 | 585 | - | - | IPX4 | 3 | 49 | - | - | - | - | -25...+60 | - | 953 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso-B 250 | 230 | Inline | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | 0.87 | - | - | 50 | 2420 | - | 1300 | Exhaust, Supply | 12.5 | 198 | -25 +50 | B | IPX4 | - | 41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Box-I EC 40x20-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | 0.69 | - | - | 50/60 | 2470 | - | 810 | Exhaust, Supply | 15.1 | 91 | -25...+50 | B | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | 2018 | 225 | IP55 | - | - | - | - | - | - | - | - | - |
|
Axis-Q 300 4D 50 Hz |
400 | wall mounting | axial | 300 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1310 | - | 50 | 1380 | - | - | Exhaust, Supply | - | 75 | - | - | IPX4 | 3 | 45 | - | - | - | - | -30...+60 | - | 364 | 5.4 | - | - | IP44 | - | 0.22 | - | - | - | - | - | - | - |
|
Axis-Q 300 4D 60 Hz |
400 | wall mounting | axial | 300 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1530 | - | 60 | 1640 | - | - | Exhaust, Supply | - | 94 | - | - | IPX4 | 3 | 45 | - | - | - | - | -30...+50 | - | 425 | 5.4 | - | - | IP44 | - | 0.25 | - | - | - | - | - | - | - |
| Primo 400 (min) | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | - | no | no | no | - | 2677 | - | 50 | 1320 | min | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 40 | - | - | - | - | -25…+55 | - | 744 | - | 2018 | - | IP20 | - | 0.91 | 197 | - | - | - | - | - | - |
| Primo 400 (mid) | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | - | no | no | no | - | 3136 | - | 50 | 1390 | mid | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 42 | - | - | - | - | -25…+55 | - | 871 | - | 2018 | - | IP20 | - | 0.90 | 204 | - | - | - | - | - | - |
| Primo 400 (max) | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | - | no | no | no | - | 3350 | - | 50 | 1446 | max | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 43 | - | - | - | - | -25…+55 | - | 931 | - | 2018 | - | IP20 | - | 0.98 | 224 | - | - | - | - | - | - |
| Kamin-ER 150 | 230 | for chimney | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | no | 0.19 | 450 | - | 50 | 1165 | - | - | Supply | - | 43 | +150 | - | IPX2 | 1 | 39 | - | - | - | - | - | - | 125 | - | - | - | IP42 | - | - | - | - | - | - | - | - | - |
| Iso-VK 400 4D | 400 | Inline | centrifugal | 400 | for round air ducts | - | - | aluzinc | no | no | yes | 1.7 | 4550 | - | 50 | 1400 | - | - | Exhaust | 58.1 | 550 | –25…+120 | – | IPX4 | 3 | 53 | - | - | - | - | - | - | 1264 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - |
| Iso-K 355 4D (50 Hz) | 400 | Inline | centrifugal | 355 | for round air ducts | - | - | galvanized steel | no | yes | yes | 0.87 | - | - | 50 | 1379 | - | 3155 | Exhaust | - | 405 | -20…+120 | - | IP54 | 3 | 49 | - | - | - | - | - | - | - | 59 | - | 876 | IP54 | - | - | - | - | - | - | - | - | - |
| Iso-K 355 4D (60 Hz) | 400 | Inline | centrifugal | 355 | for round air ducts | - | - | galvanized steel | no | yes | yes | 1.25 | - | - | 60 | 1578 | - | 3270 | Exhaust | - | 580 | -20…+120 | - | IP54 | 3 | 50 | - | - | - | - | - | - | - | 59 | - | 908 | IP54 | - | - | - | - | - | - | - | - | - |
| Box-F 40x20 4Е | 230 | Inline | centrifugal | - | for rectangular air ducts | 400 | 200 | galvanized steel | no | no | no | 1.32 | 1440 | - | 50 | 1350 | - | - | Exhaust, Supply | - | 295 | -25...+40 | - | IPX4 | 1 | 50 | - | - | - | - | - | - | 400 | 17.5 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso-B EC 150 | 230 | Inline | centrifugal | 150 | for round air ducts | - | - | galvanized steel | yes | no | yes | 0.77 | 425 | - | 50/60 | 3200 | - | - | Exhaust, Supply | - | 94.8 | - | B | IPX4 | 1 | 35 | - | - | - | - | -25...+60 | - | 118 | - | 2018 | - | IP55 | - | - | - | - | - | - | - | - | - |
|
Axis-F 250 2Е 50 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1050 | - | 50 | 2400 | - | - | Exhaust, Supply | - | 80 | - | - | IPX4 | 1 | 50 | - | - | - | - | -30...+60 | - | 292 | 3.9 | - | - | IP24 | - | 0.4 | - | - | - | - | - | - | - |
|
Axis-F 250 2Е 60 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 1150 | - | 60 | 2990 | - | - | Exhaust, Supply | - | 91 | - | - | IPX4 | 1 | 51 | - | - | - | - | -30...+50 | - | 319 | 3.9 | - | - | IP24 | - | 0.42 | - | - | - | - | - | - | - |
| Box-F 60x35 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | 600 | 350 | galvanized steel | no | no | no | 1.47 | 3310 | - | 50 | 940 | - | - | Exhaust, Supply | - | 743 | -20...+70 | - | IPX4 | 3 | 55 | - | - | - | - | - | - | 920 | 49.5 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Axis-QR 450 4D 50 Hz |
400 | wall mounting | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 5280 | - | 50 | 1360 | - | - | Exhaust, Supply | - | 250 | - | - | IPX4 | 3 | 56 | - | - | - | - | -30...+60 | - | 1467 | 10.0 | - | - | IP44 | - | 0.6 | - | - | - | - | - | - | - |
|
Axis-QR 450 4D 60 Hz |
400 | wall mounting | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 5350 | - | 60 | 1620 | - | - | Exhaust, Supply | - | 275 | - | - | IPX4 | 3 | 56 | - | - | - | - | -30...+50 | - | 1486 | 10.0 | - | - | IP44 | - | 0.65 | - | - | - | - | - | - | - |
| Tower-V 560 6E | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 2.70 | 9560 | - | 50 | 930 | - | - | Exhaust | 63 | 613 | -25…+50 | - | IPX4 | 1 | 58 | - | - | - | - | - | - | 2656 | - | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
| S-Vent 315х143-4.0-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | 8.7 | 6530 | - | 50 | 1410 | - | - | Exhaust, Supply | 49.8 | 4000 | +60 | - | IP54 | 3 | 79 | - | - | - | - | - | - | 1814 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - |
| Сentro-M 150 (60 Hz) | 220-240 | Inline | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.55 | 610 | - | 60 | 3100 | - | - | Exhaust, Supply | - | 125 | - | – | IPX4 | 1 | 46 | - | - | - | - | -25...+45 | - | 169 | 4.7 | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Сentro-M 150 (50 Hz) | 220-240 | Inline | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.45 | 580 | - | 50 | 2700 | - | - | Exhaust, Supply | - | 100 | - | C | IPX4 | 1 | 45 | - | - | - | - | -25…+45 | - | 161 | 4.7 | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Axis-Q EC 450 | 230 | wall mounting | axial | 465 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 7400 | - | 50/60 | 1400 | - | - | Supply and exhaust | - | 380 | - | - | IPX5 | 1 | 65 | - | - | - | - | –25…+60 | - | 2056 | 7.05 | - | - | IP55 | - | 1.7 | - | - | - | - | - | - | - |
| Iso-RB 400 | 230 | Inline | centrifugal | 400 | for round air ducts | - | - | aluzinc | no | no | - | 2.00 | 2860 | - | 50 | 1380 | - | - | Exhaust, Supply | - | 349 | - | - | IPX4 | 1 | 48 | - | - | - | - | -25...+55 | - | 795 | 78.5 | 2018 | - | IP54 | - | - | - | - | - | - | - | - | - |
| Iso-B 100 | 230 | Inline | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | 0.32 | - | - | 50 | 2560 | - | 240 | Exhaust | 5.4 | 73 | -25 +55 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Iso Box-F 200 G4-F8-Carbon | 230 | ceiling mounting, wall mounting | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.56 | 570 | - | 50/60 | 1250 | - | - | Supply | 20.32 | 120 | - | C | IPX4 | 1 | 38 | - | - | - | - | -25…+40 | - | 158 | - | 2018 | - | - | 93 | - | - | - | - | - | - | - | - |
|
Axis-Q 630 4Е 50 Hz |
230 | wall mounting | axial | 630 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 11900 | - | 50 | 1360 | - | - | Exhaust, Supply | - | 750 | - | - | IPX4 | 1 | 67 | - | - | - | - | -30...+60 | - | 3306 | 20.0 | - | - | IP54 | - | 3.5 | - | - | - | - | - | - | - |
|
Axis-Q 630 4Е 60 Hz |
230 | wall mounting | axial | 630 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 12100 | - | 60 | 1625 | - | - | Exhaust, Supply | - | 979 | - | - | IPX4 | 1 | 68 | - | - | - | - | -30...+50 | - | 3361 | 20.0 | - | - | IP54 | - | 4.26 | - | - | - | - | - | - | - |
| Tower-AM 315 (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 1.8 | 1920 | - | 60 | 2780 | - | - | Exhaust | 12.3 | 413 | -25…+50 | - | IPX4 | - | 55 | - | - | - | - | - | - | 533 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Tower-AM 315 (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 1.34 | 1880 | - | 50 | 2720 | - | - | Exhaust | 12.3 | 296 | -25…+45 | - | IPX4 | - | 54 | - | - | - | - | - | - | 522 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso-VK 315 2E | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | aluzinc | no | no | yes | 7.6 | 4460 | - | 50 | 2810 | - | - | Exhaust | 40.2 | 1100 | –25…+120 | – | IPX4 | 1 | 57 | - | - | - | - | - | - | 1239 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - |
| Iso-K 315 4E (50 Hz) | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | galvanized steel | no | yes | yes | 1.84 | - | - | 50 | 1475 | - | 1970 | Exhaust | - | 304 | -20…+120 | - | IP54 | 1 | 46 | - | - | - | - | - | - | - | 53.0 | - | 547 | IP54 | - | - | - | - | - | - | - | - | - |
| Iso-K 315 4E (60 Hz) | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | galvanized steel | no | yes | yes | 1.72 | - | - | 60 | 1750 | - | 2310 | Exhaust | - | 383 | -20…+120 | - | IP54 | 1 | 47 | - | - | - | - | - | - | - | 53.0 | - | 642 | IP54 | - | - | - | - | - | - | - | - | - |
| Box-I EC 60x35-3 max | 400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | 2.35 | - | - | 50/60 | 3160 | - | 4290 | Exhaust, Supply | 59.3 | 1308 | -25...+50 | – | IPX4 | 3 | 40 | - | - | - | - | - | - | - | - | 2018 | 1192 | IP54 | - | - | - | - | - | - | - | - | - |
|
Iso Box-F 150 ES V2 50 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 150 | - | - | - | polymer-coated steel | yes | - | - | - | 320 | - | 50 | 700 | min | - | - | 18.5 | 92 | - | C | IPX4 | 1 | 16 | - | - | - | - | -25…+40 | - | 89 | - | 2018 | - | - | 97 | 0.41 | - | - | - | - | - | - | - |
|
Iso Box-F 150 ES V2 60 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 150 | - | - | - | polymer-coated steel | yes | - | - | - | 430 | - | 50 | 1200 | max | - | - | 18.5 | 117 | - | C | IPX4 | 1 | 27 | - | - | - | - | -25…+40 | - | 119 | - | 2018 | - | - | 96 | 0.55 | - | - | - | - | - | - | - |
| Tubo-M 250 [50 Hz] | 220-240 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | - | no | no | 0.48 | 1070 | - | 50 | 1300 | - | - | Supply and exhaust | 3.97 | 68 | -30 … +40 | – | IPX4 | 1 | 37 | - | - | - | - | - | - | 297 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Tubo-M 250 [60 Hz] | 220-240 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | - | no | no | 0.51 | 1050 | - | 60 | 1450 | - | - | Supply and exhaust | 3.97 | 76 | -30 … +40 | – | IPX4 | 1 | 37 | - | - | - | - | - | - | 292 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Tower-V 220 2Е (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.54 | 883 | - | 60 | 2840 | - | - | Exhaust | 7 | 118 | -25…+50 | – | IPX4 | 1 | 51 | - | - | - | - | - | - | 245 | - | – | - | IP44 | - | - | - | - | - | - | - | - | - |
| Tower-V 220 2Е (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.49 | 880 | - | 50 | 2580 | - | - | Exhaust | 7 | 108 | -25…+50 | C | IPX4 | 1 | 50 | - | - | - | - | - | - | 244 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Box-I 40x20 2E 50 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | 0.6 | 930 | - | 50 | 2600 | - | - | Exhaust, Supply | 24.5 | 138 | - | - | IPX4 | 1 | 45 | - | - | - | - | -25…+45 | - | 258 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
|
Box-I 40x20 2E 60 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | 0.88 | 1070 | - | 60 | 2850 | - | - | Exhaust, Supply | 24.5 | 200 | - | - | IPX4 | 1 | 47 | - | - | - | - | -25…+45 | - | 297 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso Box-F 150 G4 | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.49 | 440 | - | 50/60 | 1250 | - | - | Supply | 15.92 | 107 | - | C | IPX4 | 1 | 27 | - | - | - | - | -25…+40 | - | 122 | - | 2018 | - | - | 39 | - | - | - | - | - | - | - | - |
| Box-D 100 (50 Hz) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | galvanized steel | no | no | no | 0.26 | - | - | 50 | 2500 | - | 240 | Exhaust | 3.2 | 61 | -25 +50 | C | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Box-D 100 (60 Hz) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | galvanized steel | no | no | no | 0.35 | - | - | 60 | 2730 | - | 250 | Exhaust | 3.2 | 79 | -25 +50 | C | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Centro-M EC 200 max | 230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | yes | no | no | 0.74 | 1010 | - | 50/60 | 2400 | - | - | Exhaust, Supply | - | 100 | - | B | IPX4 | 1 | 48 | - | - | - | - | - | - | 281 | 5.70 | 2018 | - | - | - | - | - | - | - | -25...+60 | - | - | - |
| Iso-V ЕС 450 | 230 | Inline | centrifugal | - | for round air ducts | - | - | - | yes | yes | yes | 3.3 | - | - | 50/60 | 1440 | - | - | Exhaust, Supply | 39.0 | 750 | -25 +60 | - | IPX4 | 1 | 50 | 6800 | 6460 | - | - | - | - | - | - | 2018 | - | - | - | - | - | - | - | - | - | - | - |
| Iso 125-2Е | 230 | Inline | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | 0.52 | 530 | - | 50 | 2650 | - | - | Exhaust, Supply | 4.57 | 155 | -25 +40 | C | IPX4 | - | 38.3 | - | - | - | - | - | - | 147 | - | 2018 | - | IP44 | - | - | - | - | - | - | - | - | - |
| Iso Box-F 150 G4-H13-Carbon | 230 | ceiling mounting, wall mounting | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | yes | 0.48 | 360 | - | 50/60 | 1250 | - | - | Supply | 17.08 | 102 | - | D | IPX4 | 1 | 27 | - | - | - | - | -25…+40 | - | 100 | - | 2018 | - | - | 98 | - | - | - | - | - | - | - | - |
|
Axis-Q 350 4Е 50 Hz |
230 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 2500 | - | 50 | 1380 | - | - | Exhaust, Supply | - | 140 | - | - | IPX4 | 1 | 46 | - | - | - | - | -30...+60 | - | 695 | 7.8 | - | - | IP54 | - | 0.65 | - | - | - | - | - | - | - |
|
Axis-Q 350 4Е 60 Hz |
230 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 2650 | - | 60 | 1700 | - | - | Exhaust, Supply | - | 147 | - | - | IPX4 | 1 | 47 | - | - | - | - | -30...+50 | - | 736 | 7.8 | - | - | IP54 | - | 0.66 | - | - | - | - | - | - | - |
| Tower-AL 315 (60 Hz) | 230 | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.7 | 1650 | - | 60 | 1365 | - | - | Exhaust | 11.5 | 104 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | 458 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
| Tower-AL 315 (50 Hz) | 230 | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | 0.75 | 1700 | - | 50 | 1300 | - | - | Exhaust | 11.5 | 110 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | 472 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - |
|
inWave EC 100/125 max (spigot 100 mm) |
230 | Inline | mixed-flow | - | for round air ducts | - | - | plastic | yes | no | yes | - | 295 | - | 50 | 3168 | - | - | Exhaust, Supply, Supply and exhaust | 5.0 | 39 | –25…+55 | - | IPX4 | 1 | 31 | - | - | - | - | - | 230 | 82 | - | 2018 | - | IP44 | - | 0.36 | - | - | - | - | - | - | 100 |
|
inWave EC 100/125 max (spigot 125 mm) |
230 | Inline | mixed-flow | - | for round air ducts | - | - | plastic | yes | no | yes | - | 450 | - | 50 | 3138 | - | - | Exhaust, Supply, Supply and exhaust | 5.0 | 39 | –25…+55 | - | IPX4 | 1 | 33 | - | - | - | - | - | 230 | 125 | - | 2018 | - | IP44 | - | 0.37 | - | - | - | - | - | - | 125 |
| Box-R 200 | 1 ~ 230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.61 | - | - | 50 | 950 | - | 783 | Exhaust, Supply | 8.8 | 139 | 50 | C | IPX4 | - | 47 | - | - | - | - | - | - | - | - | - | 218 | - | - | - | - | - | - | - | - | - | - |
| Box-R 100/100x5 V3(1 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.32 | - | - | 50 | 1400 | - | 97 | Exhaust, Supply | 3.5 | 20 | 50 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | - | - | - | - | - | - |
| Box-R 100/100x5 V3(2 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.34 | - | - | 50 | 1800 | - | 138 | Exhaust, Supply | 3.5 | 26 | 50 | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - |
| Box-R 100/100x5 V3(3 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | 0.4 | - | - | 50 | 2600 | - | 176 | Exhaust, Supply | 3.5 | 45 | 50 | C | IPX4 | - | 44 | - | - | - | - | - | - | - | - | - | 49 | - | - | - | - | - | - | - | - | - | - |
|
Iso Box-F 100 ES 50 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 100 | - | - | - | polymer-coated steel | yes | - | - | - | 180 | - | 50 | 1300 | - | - | - | 16.5 | 53 | - | D | IPX4 | 1 | 23 | - | - | - | - | -25...+40 | - | 50 | - | 2018 | - | - | 97.1 | 0.27 | - | - | - | - | - | - | - |
|
Iso Box-F 100 ES 60 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 100 | - | - | - | polymer-coated steel | yes | - | - | - | 215 | - | 60 | 1480 | - | - | - | 16.5 | 55 | - | D | IPX4 | 1 | 24 | - | - | - | - | -25...+40 | - | 60 | - | 2018 | - | - | 97.1 | 0.24 | - | - | - | - | - | - | - |
| Iso-K 250 4D | 400 | Inline | centrifugal | 250 | for round air ducts | - | - | galvanized steel | no | yes | yes | 3.4 | - | - | 50 | 1470 | - | 3500 | Exhaust | - | 1500 | -20…+120 | - | IP54 | 3 | 51 | - | - | - | - | - | - | - | 40.0 | - | 972 | IP54 | - | - | - | - | - | - | - | - | - |
TO COMPLETE THE REGISTRATION CLICK THE LINK SENT YOU BY EMAIL
x
x
Check your email for further instructions!
x
x
Your message has been successfully sent and will be reviewed as soon as possible.
x
x