Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Length | Current | Power | Maximum air flow | Frequency | RPM | Speed | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Insulation class | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Air flow in ventilation mode | Air flow in heat recovery mode | Connected air duct size | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Insulation | Heat recovery efficiency | Total unit power | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Insulation thikness | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air flow in ventilation mode | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Electric heater current | Remote control panel | Functions | Remote control panel | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | * | ** | Transported air temperature | Perm. amb. temp. | Max. air flow at air flow direction (direct air flow) | Max. air flow at air flow direction (perpendicular air flow) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KOMFORT Roto EC D2E350 S17 | 230 | - | - | - | - | - | - | painted steel | - | - | - | - | - | - | - | 400 | 50/60 | 3200 | - | - | - | - | - | - | A | - | 1 | 33 | - | - | rotary | aluminum | - | - | - | 5.6 | - | 160 | - | - | - | -25...+40 | - | - | 20 mm mineral wool | 73–87 | - | - | - | - | 1400 | - | 111 | - | 79 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | - | - | 200 | 1600 | 1.3 | 6.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AL 315 (60 Hz) | 230 | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 0.7 | - | 1650 | 60 | 1365 | - | - | Exhaust | 11.5 | 104 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 458 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AL 315 (50 Hz) | 230 | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 0.75 | - | 1700 | 50 | 1300 | - | - | Exhaust | 11.5 | 110 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 472 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80 V3(1 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 0.32 | - | - | 50 | 1400 | - | 88 | Exhaust, Supply | 3.2 | 20 | 50 | C | IPX4 | - | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80 V3(2 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 0.34 | - | - | 50 | 1800 | - | 130 | Exhaust, Supply | 3.2 | 26 | 50 | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80 V3(3 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 0.4 | - | - | 50 | 2600 | - | 162 | Exhaust, Supply | 3.2 | 45 | 50 | C | IPX4 | - | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFH 1200 | 200-240 | floor mounting, outdoor mounting | - | - | for round air ducts | - | - | aluzinc | yes | yes | yes | - | - | - | - | 1200 | 50/60 | 3000 | - | - | Supply and exhaust | - | 2x610 | - | - | IP34 | 1 | 35 | - | - | - | - | - | B | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | - | - | 230 | - | - | ePM1 ≥ 50% (ISO 16890) | F7 (EN 779) | - | - | IP54 | - | - | - | 5.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 | - | - |
KOMFORT Ultra L 250-H S12 white | 230 | wall mounting, floor mounting | - | - | for round air ducts | - | - | - | no | no | yes | - | - | - | - | 250 | 50/60 | 2700 | - | - | Supply and exhaust | - | 148 | - | E | - | 1 | 28...47 | - | - | cross-flow | polystyrene | - | - | - | - | 0.78 | 125 | - | - | - | -25...+40 | - | - | 20 mm mineral wool | 55...78 | - | - | - | - | - | - | 69 | - | - | 2016 | - | G4 | G4 (option: F8 PM2.5 > 81 %) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-F 100x50 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | 1000 | 500 | galvanized steel | no | no | no | - | - | 7.0 | - | 9540 | 50 | 930 | - | - | Exhaust, Supply | - | 3870 | -20...+55 | - | IPX4 | 3 | 61 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2650 | - | 95.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco A30-4 S11 Pro (1 Speed) |
100-240 | wall mounting | - | - | 100 | - | - | - | yes | - | - | - | - | 0.021 | - | - | 50/60 | 1600 | I | - | - | - | 1.03 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | 10 | 5 | - | -20...+40 | 42 | - | - | ≤81 | - | - | - | - | - | - | - | 0.74 | - | - | - | - | - | 3 | 1 | - | - | - | - | - | - | - | - | - | 30 | 21 | - | - | - | Sensor | Filter replacement indication, Timer, External sensor connection | - | D1 | - | - | - | - | - | - |
Vento Eco A30-4 S11 Pro (2 Speed) |
100-240 | wall mounting | - | - | 100 | - | - | - | yes | - | - | - | - | 0.027 | - | - | 50/60 | 2200 | II | - | - | - | 1.96 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | 20 | 10 | - | -20...+40 | 42 | - | - | ≤81 | - | - | - | - | - | - | - | 0,71 | - | - | - | - | - | 6 | 3 | - | - | - | - | - | - | - | - | - | 37 | 28 | - | - | - | Sensor | Filter replacement indication, Timer, External sensor connection | - | D1 | - | - | - | - | - | - |
Vento Eco A30-4 S11 Pro (3 Speed) |
100-240 | wall mounting | - | - | 100 | - | - | - | yes | - | - | - | - | 0.038 | - | - | 50/60 | 2500 | III | - | - | - | 3.47 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | 30 | 15 | - | -20...+40 | 42 | - | - | ≤81 | - | - | - | - | - | - | - | 0.83 | - | - | - | - | - | 8 | 4 | - | - | - | - | - | - | - | - | - | 40 | 31 | - | - | - | Sensor | Filter replacement indication, Timer, External sensor connection | - | D1 | - | - | - | - | - | - |
BLAUBOX MW 1800-4 Pro | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | 1870 | 50 | 1100 | - | - | Supply | - | - | - | - | - | 1 | 40 | - | - | - | - | - | - | -25...+40 | - | 2.15 | - | - | - | 500х250 | - | - | 4 | 25 mm mineral wool | - | 490 | - | - | - | - | - | 519 | - | 62.5 | 2016, 2018 | - | - | G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 500 4Е 50 Hz |
230 | wall mounting | axial | 500 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 7060 | 50 | 1300 | - | - | Exhaust, Supply | - | 420 | - | - | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | 1961 | - | 14.0 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | 1.95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 500 4Е 60 Hz |
230 | wall mounting | axial | 500 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 7130 | 60 | 1630 | - | - | Exhaust, Supply | - | 455 | - | - | IPX4 | 1 | 59 | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | 1981 | - | 14.0 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | 2.05 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q EC 200 max | 230 | wall mounting | axial | 210 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | - | - | - | 1600 | 50/60 | 2900 | - | - | Supply and exhaust | - | 115 | - | - | IPX5 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | –25…+60 | - | - | - | - | - | - | - | - | - | - | 444 | - | 2.04 | - | - | - | - | - | - | IP55 | - | - | - | - | - | - | 0.85 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Clean Box 150 ES | 1 ~ 110-220 | ceiling mounting, wall mounting, flush mounting | - | 150 | for round air ducts | - | - | polymer-coated steel | - | - | - | - | - | 0.1 | 18 | - | 50/60 | - | - | - | Supply | 12.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 710 6D | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 4.87 | - | 17010 | 50 | 945 | - | - | Exhaust | 114 | 2583 | -25…+70 | - | IPX4 | 3 | 67 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4725 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE2 300 S21 V.2 | 230 | ceiling mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating, electric reheating | - | - | - | 300 | 50/60 | - | - | - | Supply and exhaust | 80 | - | - | A+ | - | 1 | 34 | - | - | counter-flow | polystyrene | - | - | -25...+40 | - | - | 200 | - | - | - | - | - | - | - | 83…92* | - | 44 | - | 204 | 700 | - | 83 | - | - | - | - | - | - | - | - | - | - | - | 1.5 | - | - | 11.7 | - | 1050 | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - |
Freshbox E-100 ERV black Speed I |
230 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | - | 30 | 50/60 | 2200 | I | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | enthalpy membrane | - | - | - | - | - | 100 | - | - | - | -20...+40 | - | - | - | 90 | - | - | - | - | - | 10 | 8 | - | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | - | - | 12 | - | 0.4 | - | - | 3.6 | - | 700 | - | 13 | - | - | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - |
Freshbox E-100 ERV black Speed II |
230 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | - | 60 | 50/60 | 2200 | II | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | enthalpy membrane | - | - | - | - | - | 100 | - | - | - | -20...+40 | - | - | - | 86 | - | - | - | - | - | 10 | 17 | - | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | - | - | 21 | - | 0.4 | - | - | 3.6 | - | 700 | - | 27 | - | - | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - |
Freshbox E-100 ERV black Speed III |
230 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | - | 100 | 50/60 | 2200 | III | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | enthalpy membrane | - | - | - | - | - | 100 | - | - | - | -20...+40 | - | - | - | 83 | - | - | - | - | - | 10 | 28 | - | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | - | - | 45 | - | 0.4 | - | - | 3.6 | - | 700 | - | 39 | - | - | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - |
Tower-H 220 2Е (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 0.49 | - | 880 | 50 | 2580 | - | - | Exhaust | 7 | 108 | -25…+50 | C | IPX4 | 1 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 244 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 220 2Е (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 0.54 | - | 883 | 60 | 2840 | - | - | Exhaust | 7 | 118 | -25…+50 | – | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 245 | - | - | – | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mix-E 450-4E | 230 | Inline | mixed-flow | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 7.72 | - | 6385 | 50 | 1475 | - | - | - | 35 | 1200 | - | - | IPX4 | 1 | 65 | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | - | 1774 | - | - | 2016 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 250х127-2.2-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 5.1 | - | 3720 | 50 | 1420 | - | - | Exhaust, Supply | 32.2 | 2200 | +60 | - | IP54 | 3 | 78 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1033 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 50x30 4E 50 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | 0.57 | - | 1700 | 50 | 1390 | - | - | Exhaust, Supply | 19.80 | 140 | - | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+45 | - | - | - | - | - | - | - | - | - | - | 472 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 50x30 4E 60 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | 0.73 | - | 1855 | 60 | 1530 | - | - | Exhaust, Supply | 19.80 | 175 | - | - | IPX4 | 1 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | - | 515 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SB 160-E S21 | 230 | wall mounting, floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | - | - | 200 | 50/60 | 3770 | - | - | - | - | 57 | - | A | - | 1 | 24 | - | - | counter-flow | enthalpy membrane | - | - | - | - | - | 125 | - | - | - | -25...+40 | - | - | 20 mm mineral wool | 76...92 | - | - | - | - | - | - | 56 | - | 36 | 2016, 2018 | - | G4 | F7 (option: G4) | - | - | - | - | - | - | - | - | - | 0.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC LBE 400-E S21 | 230 | ceiling mounting, floor mounting | - | - | - | - | - | galvanized steel | - | - | - | - | - | - | - | 540 | 50/60 | 2600 | - | - | - | - | - | - | A | - | 1 | 27 | - | - | counter-flow | enthalpy membrane | 2800 | - | - | - | - | 200 | - | - | - | -25…+40 | - | - | 40 mm mineral wool | 78–89 | - | - | - | - | - | - | 150 | - | 76 | - | - | G4 | G4, F7 | - | - | - | 289 | - | 2.1 | - | 3089 | 14.3 | - | - | - | - | - | - | 12.2 | - | - | - | - | - | - | - | - | - | - |
Iso-V 450 4Е | 230 | Inline | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | aluminium, aluzinc | no | yes | yes | - | - | 3 | - | - | 50 | 1250 | - | - | Exhaust, Supply | 43 | 680 | - | - | IPX4 | 1 | 53 | 5630 | 4930 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+70 | - | 1370 | 1564 |
Vento Ergo A85-1 S Pro V.3 (1 speed) |
- | - | - | - | 150 | - | - | - | yes | - | - | - | - | 0.034 | - | 36 | 50/60 | 1000 | I | - | - | - | 4.74 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 18 | - | -20...+40 | 40 | - | - | - | - | - | 100-240 | - | - | - | 10 | 0.95 | - | - | - | - | - | - | 5 | - | - | - | - | - | - | - | - | - | 29 | 19 | G3 (Option: G4, F8 PM2.5 > 99 %*) | up to 90 | - | - | Filter replacement indication, Timer, Humidity sensor | yes | - | Maximum air flow 40 m³/h | - | - | - | - | - |
Vento Ergo A85-1 S Pro V.3 (2 speed) |
- | - | - | - | 150 | - | - | - | yes | - | - | - | - | 0.050 | - | 59 | 50/60 | 1500 | II | - | - | - | 6.56 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | -20...+40 | 40 | - | - | - | - | - | 100-240 | - | - | - | 16 | 0.80 | - | - | - | - | - | - | 8 | - | - | - | - | - | - | - | - | - | 35 | 25 | G3 (Option: G4, F8 PM2.5 > 99 %*) | up to 90 | - | - | Filter replacement indication, Timer, Humidity sensor | yes | - | Maximum air flow 40 m³/h | - | - | - | - | - |
Vento Ergo A85-1 S Pro V.3 (3 speed) |
- | - | - | - | 150 | - | - | - | yes | - | - | - | - | 0.071 | - | 85 | 50/60 | 2045 | III | - | - | - | 9.65 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | 43 | - | -20...+40 | 40 | - | - | - | - | - | 100-240 | - | - | - | 24 | 0.82 | - | - | - | - | - | - | 12 | - | - | - | - | - | - | - | - | - | 44 | 34 | G3 (Option: G4, F8 PM2.5 > 99 %*) | up to 90 | - | - | Filter replacement indication, Timer, Humidity sensor | yes | - | Maximum air flow 40 m³/h | - | - | - | - | - |
SD 355/1200 | - | - | - | 355 | for round air ducts | - | - | galvanized steel | - | - | - | - | 1200 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 11.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 250 4D 50 Hz |
400 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 850 | 50 | 1400 | - | - | Exhaust, Supply | - | 60 | - | - | IPX4 | 3 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | 236 | - | 3.4 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.17 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 250 4D 60 Hz |
400 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 885 | 60 | 1750 | - | - | Exhaust, Supply | - | 89 | - | - | IPX4 | 3 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | 246 | - | 3.4 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D250 S18 | 230 | - | - | - | - | - | - | painted steel | - | - | - | - | - | - | - | 310 | 50/60 | 2200 | - | - | - | - | - | - | A | - | 1 | 21 | - | - | rotary | aluminum | - | - | - | - | - | 160 | - | - | - | -25...+40 | - | - | 40 mm mineral wool | 71–87 | - | - | - | - | - | - | 86 | - | 55 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | - | - | 135 | 135 | 1.0 | 1.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |