Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Form | Length | Material | Device | Current | Maximum air flow | Sound pressure level | Frequency | RPM | Speed | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Heat exchanger type | Heat exchanger material | Electric heater power | Transported air temperature | Connected air duct diameter | Air flow in ventilation mode | Connected air duct size | Filter | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Insulation | Heat recovery efficiency | Sound pressure level at a distance of 1 m | Operating temperature range | Voltage | Max. unit power without an electric heater | Reheater power consumption | Insulation thikness | Maximum air flow | SFP | Weight | ErP | Extract filter | Supply filter | Air speed | Maximum operating pressure | Air flow in ventilation mode | Motor IP rating | Max. power without electric heater | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Maximum power consumption in "Heat Recovery + Heat Pump" | Maximum power consumption in "Heat Recovery" | Maximum power consumption in "Heat Recovery + Heat Pump + Pre-Heating" | Air-handling unit energy efficiency "Heating" mode (COP) | Air-handling unit energy efficiency "Cooling" mode (ERR) | Coolant | Coolant weight | Heat output in "Heating" mode [kW] at t0 = +7 °C; tk = +45 °C* | Compressor type | Temperature setting range in "Cooling/Heating" | Heat output in "Cooling" mode [W] at t0 = +7 °C; tk = +45 °C | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Air flow in heat recovery mode | Air flow in heat recovery mode | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8 | Power | Cable cross section | * | Motor max. power | ** | *** | ** |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KOMFORT Roto EC LE 1500-9 S17 | 400 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | - | - | 1500 | - | 50/60 | 2000 | - | - | - | - | - | - | - | - | 3 | 62 | rotary | aluminum | 9000 | - | 315 | - | - | - | -25...+40 | - | 25 mm mineral wool | 72–95 | - | - | - | - | - | - | 417 | - | 175 | 2016, 2018 | G4 | G4 | - | - | - | - | - | - | - | 9750 | 14.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 222 | - | - | - |
Iso-ZS 315/2x250 4E | 230 | - | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | - | - | - | 3.36 | - | - | 50 | 1390 | - | 3420 | Exhaust, Supply | 33.0 | 764 | -20…+50 | - | IPX4 | 1 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LBE 500 S21 V.2 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | - | - | - | 580 | - | 50/60 | - | - | - | Supply and exhaust | 140 | - | - | A | - | 1 | 38 | counter-flow | polystyrene | - | -25...+40 | 250 | - | - | - | - | - | 40 mm mineral wool | 75...94* | 47 | - | - | 370 | - | - | 161 | - | - | - | - | - | - | - | - | - | - | 2.5 | - | - | 9.1 | - | - | - | - | - | - | - | - | - | - | - | - | 1050 | - | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Freshbox 100 Speed I |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | - | - | - | - | 30 | - | 50/60 | 2200 | I | - | - | 31 | - | - | A | - | 1 | - | counter-flow | polystyrene | - | - | 100 | - | - | - | -20...+40 | - | - | 98 | - | - | - | - | - | 10 | 8 | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | - | - | - | 12 | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 13 | - | - | - | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | - | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Freshbox 100 Speed II |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | - | - | - | - | 60 | - | 50/60 | 2200 | II | - | - | 31 | - | - | A | - | 1 | - | counter-flow | polystyrene | - | - | 100 | - | - | - | -20...+40 | - | - | 92 | - | - | - | - | - | 10 | 17 | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | - | - | - | 21 | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | - | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Freshbox 100 Speed III |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | - | - | - | - | 100 | - | 50/60 | 2200 | III | - | - | 31 | - | - | A | - | 1 | - | counter-flow | polystyrene | - | - | 100 | - | - | - | -20...+40 | - | - | 89 | - | - | - | - | - | 10 | 28 | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | - | - | - | 45 | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 39 | - | - | - | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | - | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Tower-H 500 6D (50 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 1.23 | 6000 | - | 50 | 978 | - | - | Exhaust | 52.7 | 440 | -25…+60 | - | IPX4 | 3 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1667 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 500 6D (60 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 1.32 | 6122 | - | 60 | 1125 | - | - | Exhaust | 52.7 | 599 | -25…+60 | - | IPX4 | 3 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1701 | - | - | – | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 450 | 230 | Inline | centrifugal | 450 | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | - | 2.13 | 3750 | - | 50 | 1350 | - | - | Exhaust, Supply | - | 482 | - | - | IPX4 | 1 | 50 | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - | 1042 | - | 84 | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 200х93-1.1-2D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 2.6 | 1900 | - | 50 | 2800 | - | - | Exhaust, Supply | 16.2 | 1100 | +60 | - | IP54 | 3 | 73 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 528 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Extero 100 50 Hz |
230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 0.31 | 325 | - | 50 | 2530 | - | - | Exhaust | - | 71 | +55 | C | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 90 | - | 4.1 | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Extero 100 60 Hz |
230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 0.40 | 350 | - | 60 | 2625 | - | - | Exhaust | - | 92 | +55 | C | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 97 | - | 4.1 | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT S5 230 S4 | 230 | - | - | - | - | - | - | EPP | - | - | - | - | - | - | - | - | - | 230 | - | 50/60 | 2720 | - | - | - | - | - | - | B | - | 1 | 35 | counter-flow | polystyrene | - | - | 125 | - | - | - | -25…+40 | - | 15-26 mm, EPP | 87–98 | - | - | - | - | - | - | 64 | - | 13 | 2016 | G4 | G4 (Option: F8) | - | - | - | - | - | - | - | - | - | 0.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 163 | - | - | - | - | - | - |
KOMFORT EC LB 300 S21 | 230 | ceiling mounting, floor mounting | - | - | - | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | 380 | - | 50/60 | 2100 | - | - | - | - | - | - | A+ | - | 1 | 24 | counter-flow | polystyrene | - | - | 160 | - | - | - | -25…+40 | - | 40 mm mineral wool | 80–98 | - | - | - | - | - | - | 106 | - | 63.1 | - | G4 | G4, F7 | - | - | - | - | 182 | 1.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-B 200 | 230 | Inline | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | - | - | - | 0.45 | - | - | 50 | 2550 | - | 730 | Exhaust, Supply | 10.0 | 103 | -25 +50 | B | IPX4 | - | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I 60x30 4E 50 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | - | - | - | 0.9 | 2470 | - | 50 | 1400 | - | - | Exhaust, Supply | 43.5 | 220 | - | - | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | -25…+45 | - | - | - | - | - | - | - | - | - | 686 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I 60x30 4E 60 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | - | - | - | 1.38 | 2510 | - | 60 | 1450 | - | - | Exhaust, Supply | 43.5 | 310 | - | - | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | -25…+40 | - | - | - | - | - | - | - | - | - | 697 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
SD 250/900 | - | - | - | 250 | for round air ducts | - | - | galvanized steel | - | - | - | - | - | 900 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 6.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 350 4Е 50 Hz |
230 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | - | 2500 | - | 50 | 1380 | - | - | Exhaust, Supply | - | 140 | - | - | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | 695 | - | 7.5 | - | - | - | - | - | - | IP24 | - | - | - | - | - | 0.65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 350 4Е 60 Hz |
230 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | - | 2650 | - | 60 | 1700 | - | - | Exhaust, Supply | - | 147 | - | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | 736 | - | 7.5 | - | - | - | - | - | - | IP24 | - | - | - | - | - | 0.66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC ME 3000-45 S31 | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | yes | no | - | - | - | - | - | - | - | 3150 | - | 50 | - | - | - | Supply | - | - | - | - | - | 3 | 47 | - | - | 45.0 | -30…+40 | - | - | 600 × 300 | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | 30 mm mineral wool | - | - | - | - | - | - | - | - | - | 50 | 2018 | - | - | - | - | - | - | 0.472 | 2.1 | - | 45.472 | 72.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauFlex Iso N 82/7.6 | - | - | - | 82 | for round air ducts | - | - | - | - | - | - | - | round | 7600 | - | air duct | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 mm mineral wool | - | - | -30...+120 | - | - | - | - | - | - | - | - | - | - | 30 | 3000 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H EC 400 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | - | - | - | - | 3.90 | 5380 | - | 50/60 | 1450 | - | - | Exhaust | - | 526 | -25...+50 | – | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1495 | - | 27 | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LEHP 700 S18 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | - | - | 830 | - | 50 | - | - | - | - | - | - | - | - | - | 1 | 52 | rotary | aluminum | - | - | 250 | - | - | - | -25…+40 | - | - | 85 | - | - | - | - | - | - | 231 | - | 160 | - | G4 | G4 (Option: F7) | - | - | - | - | - | - | 18.5 | - | - | - | 0.94 | 0.36 | 3.74 | 6.5 | 4.15 | R410A | 1.6 | 2.6 | Sealed, rotary type | +16...+30 | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Valeo-BP 35/60 (1 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | - | - | - | - | - | - | 0.12 | 35 | 27* | 50 | - | I | - | Exhaust | - | 15 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | 10 | - | - | - | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - | - |
Valeo-BP 35/60 (2 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | - | - | - | - | - | - | 0.14 | 63 | 36* | 50 | - | II | - | Exhaust | - | 25 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | 18 | - | - | - | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - | - |
Box EC 60x35-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | - | - | - | - | 2815 | - | 50/60 | 2000 | - | - | Exhaust, Supply | 25.2 | 361 | - | – | IPX4 | 1 | 49 | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | 782 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | 2.62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco2 A50-4 S Pro (1 speed) | - | - | - | - | 160 | - | - | - | - | - | - | - | - | - | - | - | 0.033 | - | - | 50/60 | 915 | I | - | - | - | 2.37 | - | - | IP24 | - | - | - | - | - | - | - | 15 | - | - | -20(-30**) … +40 | 41 | - | - | - | - | 100-240 | - | - | - | - | 0.57 | - | - | - | - | - | - | 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 21 | 12 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 15 | 4 | Sensor | Filter replacement indication, Timer | D1 | S3*** | - | - | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - |
Vento Eco2 A50-4 S Pro (2 speed) | - | - | - | - | 160 | - | - | - | - | - | - | - | - | - | - | - | 0.047 | - | - | 50/60 | 1555 | II | - | - | - | 3.80 | - | - | IP24 | - | - | - | - | - | - | - | 30 | - | - | -20(-30**) … +40 | 41 | - | - | - | - | 100-240 | - | - | - | - | 0.46 | - | - | - | - | - | - | 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | 18 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 30 | 8 | Sensor | Filter replacement indication, Timer | D1 | S3*** | - | - | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - |
Vento Eco2 A50-4 S Pro (3 speed) | - | - | - | - | 160 | - | - | - | - | - | - | - | - | - | - | - | 0.080 | - | - | 50/60 | 2330 | III | - | - | - | 7.61 | - | - | IP24 | - | - | - | - | - | - | - | 50 | - | - | -20(-30**) … +40 | 41 | - | - | - | - | 100-240 | - | - | - | - | 0.55 | - | - | - | - | - | - | 14 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 29 | 20 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 50 | 14 | Sensor | Filter replacement indication, Timer | D1 | S3*** | - | - | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - |
KOMFORT Roto EC LE 700-3.3 S18 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | - | - | 700 | - | 50/60 | 2600 | - | - | - | - | - | - | A | - | 1 | 52 | rotary | aluminum | 3300 | - | 250 | - | - | - | -25...+40 | - | 20 mm mineral wool | 76–95 | - | - | - | - | - | - | 194 | - | 128 | 2016, 2018 | G4 | G4 | - | - | - | - | - | - | - | 3615 | 15.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 105 | - | - | - |
Iso-ZS 250 6E max | 230 | - | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | - | - | - | 1.36 | - | - | 50 | 940 | - | 1680 | Exhaust, Supply | 31.3 | 311 | -20…+50 | - | IPX4 | 1 | 41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LBE2 300 S21 V.2 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating, electric reheating | - | - | - | - | - | 320 | - | 50/60 | - | - | - | Supply and exhaust | 103 | - | - | A | - | 1 | 37 | counter-flow | polystyrene | - | -25...+40 | 200 | - | - | - | - | - | 40 mm mineral wool | 85...94* | 47 | - | - | 96 | 700 | - | 89 | - | - | - | - | - | - | - | - | - | - | 0.75 | - | - | 11 | - | - | - | - | - | - | - | - | - | - | - | - | 1050 | - | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
BlauPlast RVP 100 | - | - | - | 100 | for round air ducts | - | - | - | - | - | - | - | round | - | plastic | connector | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |