Blauberg CIVIC EC LBE 500
- Capacity diagram
- Designation key
The CIVIC EC LB units are designed forsingle-room ventilation of schools, officesand other public and commercial premises.Offer the ideal simple and efficient ventilationsolutions for existing and renovated buildingsand require no layout of air ducts.Efficient supply and extract ventilation for separate premises.
EC fans with low energy consumption.Low-noise operation.
Made of high-quality polymer coated steel, internally lined with heat- and sound insulation of mineral wool or other materials.Available modifications with an integrated preheater and reheater for cold climate applications.
High efficient electronically commutated motors with external motor and impeller with forward curved blades. Such motors are the most state-ofthe-art energy saving solution.EC motors are featured with high performance and total speed controllable range. High efficiency reaching 90 % is the premium advantage of the electronically commutated motors.
Supply air is cleaned with G4 and F8 (PM2.5 > 75 %) supply cassette air filters. For premises requiring high air quality it is recommended to install carbon F8 filters and H11 (PM2.5 > 95 %) filters. Available as specially ordered accessories.Cassette G4 filter is used for extract air filtration.
|The units are equipped with a bypass. The bypass damper opens for free cooling ventilation mode in summer.||
CIVIC EC LBE and CIVIC EC LBE2 units are equipped with an electric preheater which protects the heat exchanger from freezing.
CIVIC EC LBE2 units feature an electric post-heater to raise the supply airtemperature.
|The automatic supply and extract air dampers are used to prevent uncontrollable air draughts during the unit standstill.|
|The ventilation units may be operated with an integrated or an external control panel.||
The CIVIC EC LB unit has a counter-flow heat exchanger made of polystyrene and aluminium.
• In cold season the heat energy of the extract air flow is absorbed by intake air flow, thus decreasing the heat losses caused by ventilation. Condensate generated during heat recovery is collected in a drain pan and removed to the sewage system.
• In warm season the heat of the outdoor air is absorbed by extract air flow. This way the supply air temperature decreases and heat recovery reduces operation loads for the air conditioner.
The CIVIC EC LBE unit is equipped with a counter-flow heat exchanger made of enthalpy membrane.
• In cold season the heat and moisture of the extract air are absorbed by supply air through the enthalpy membrane, thus decreasing the heat losses caused by ventilation.
• In warm season the heat and moisture of the outdoor air is absorbed by extract air flow through the enthalpy membrane. This way the supply air temperature and humidity decreases and heat recovery reduces operation loads for the air conditioner.
|THREE AVAILABLE MODIFICATIONS OF THE CONTROL PANEL:|
• - available; ○ - option.
The freeze protection function may be realized by two ways.
For the units without preheater: the supply fan shuts down on a signal from the exhaust air temperature sensor to let warm extract air flow warm up the heat exchanger. Then the supply fan turns on and the unit operates normally.For the units with a preheater: the supply air is warmed up before contacting the heat exchanger, thus preventing its freezing. In this case balanced air exchange is not interrupted.
Cold outside air flows through the filters and heat exchanger and is moved to the room with a supply centrifugal fan.
Warm polluted air from the premise flows through the filter and the heat exchanger and is exhausted outside with an extract centrifugal fan.
|Parameter||CIVIC EC LBE 500||Measurement unit|
|Max. unit current without electric heater||1.7||A|
|Max. unit current with electric heater||7.8||A|
|Preheater power consumption||1400||W|
|Max. unit power without an electric heater||232||W|
|Reheater power consumption||-||W|
|Sound pressure level at 3 m distance||35||dBА|
|Insulating material||40 mm mineral wool||mm|
|Transported air temperature||-25...+50||°С|
|Supply filter||G4 and F8 (Option: F8 Carbon; H11)||-|
|Heat recovery efficiency||79...93||%|
|Heat exchanger type||counter-flow||-|
|Heat exchanger material||aluminum||-|
|Connected air duct diameter||250||mm|
|Casing material||painted steel||-|
|Type||Supply and exhaust||-|
- Selection method:
- Air capacity:
- Air capacity: --
- Pressure: ---
|Model||Motor type||Mounting||Bypass||Heater||Nominal air flow [m³/h]||Heat exchanger type||Control|
|CIVIC||EC: synchronous electronically commutated motor||L: floor mounting||B: integrated bypass||
|300; 500||_: heat recovery
-E: energy recovery
|S14: sensor control panel
S17: th-Tune control panel
S18: pGD control panel
|CIVIC EC LBE 500||250||2170||1833||337||535||585||750||290||230|
|Civic EC LB... 500 S17/S18||Civic EC LB... 500 S14|
|G4 filter||FP 450x257x27 G4 PPI||FP 450x257x27 G4 PPI|
|G4 filter||FP 318x290x22 G4||FP 318x290x22 G4|
|F8 filter||FP 318x290x60 F8||FP 318x290x60 F8|
|F8 carbon filter||FP 666x196x48 F8 C||FP 666x196x48 F8 C|
|H11 filter||FP 666x196x60 H11||FP 666x196x60 H11|
|Outer ventilation hood made of brushed stainless steel||AH Civic 500 LB chrome||AH Civic 500 LB chrome|
|Outer ventilation hood made of white coated steel||AH Civic 500 LB white||AH Civic 500 LB white|
|External VOC sensor (0-10V)||DPWQ30600||-|
|External CO2 sensor (0-10V)||DPWQ40200||-|
|External humidity sensor (0-10V)||DPWС11200||-|
|Humidity sensor (NO)||HR-S||HR-S|
|Assembled U-trap||SFK 20x32||SFK 20x32|
|Assembled drain pump||CP-2||CP-2|