Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts

Privacy policy

Blauberg KOMFORT EC D5 180-E S2

Heat and energy recovery air handling unit. Maximum air flow up to 220 m³/h.
EAN codeEAN4058448062117
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
  • Dimensions
  • Additional characteristics

Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.Heat recovery minimizes ventilation heat losses during cold season and reduce air conditioner load during hot season.Controllable air exchange for creating the best suitable indoor microclimate.Compatible with round Ø 150 mm air ducts.


The casing is made of expanded polypropylene (EPP) 15–30 mm thick with high heat- and sound-insulating properties.The spigots are located at the side of the unit and are rubber sealed for airtight connection to the air ducts.


High-efficient external rotor EC motors and centrifugal impellers with forward curved blades are used for air supply and exhaust.EC motors have the best power consumption to air flow ratio and meet the latest demands concerning energy saving and high-efficient ventilation.EC motors are featured with high performance, low noise level and totally controllable speed range.Dynamically balanced impellers.


Two built-in G4 and F7 filters provide efficient supply air filtration.The G4 filter is used for extract air filtration.

The KOMFORT EC D5B180(-E) models are equipped with a bypass which can be opened if there is a need to cool down the ventilated area with cool intake air.


The KOMFORT EC D5(B)180 unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. In the unit condensate is collected and drained to the drain pan under the heat exchanger.The KOMFORT EC D5(B)180-E unit is equipped with an enthalpy plate counter-flow heat exchanger for enegry (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger.

The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively.In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.

The units are designed for suspended ceiling mounting, vertical or horizontal wall mounting.Sufficient service access for maintenance and filter replacement must be provided.


The KOMFORT EC D5B180(-E) S21 units are equipped with a built-in automation system. The remote control panel is not included in the delivery set (sold separately). The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management Systems). Unit control via Wi-Fi using the mobile application Blauberg AHU.

the Blauberg AHU
app for Android

the Blauberg AHU
app for iOS

The KOMFORT EC D5B180(-E) S14 units are equipped with an integrated automation system and an S14 wall mounted sensor control panel with LED-indication. The KOMFORT EC D5 180(-E) S2 units are equipped with a CDT E/0-10 speed regulator.

Functions KOMFORT EC D5B180(-E) S21 KOMFORT EC D5B180(-E) S14 KOMFORT EC D5 180(-E) S2
Unit control via Wi-Fi using the mobile application +
Unit control via remote control panel
S22 control panel (option)
S14 control panel
CDT E/0-10 speed controller
Unit control via remote wireless control panel
S22 WiFi control panel (option)
Unit control via a wired remote LCD control panel
S25 control panel (option)
BMS (Building Management Systems) RS-485
Blauberg Cloud Server service +
Speed switch + + +
Filter replacement indication according to filter timer according to filter timer
Alarm indication full description of the alarm in the mobile application LED indication about alarms
Week scheduled operation +
Bypass automatic
manual manual
Timer +
Boost mode +
Fireplace mode +
Freeze protection using cyclical stops of the supply fan using cyclical stops of the supply fan using cyclical stops of the supply fan
using preheating (option)
Reheater connection option
Cooler connection option
Minimum supply air temperature control +
Humidity control option option
CO2 control option option
VOC control option
PM2.5 control option
Fire alarm sensor connection option option
option: the functionality is available when purchasing the appropriate accessory (see the "Accessories" section)
Parameter KOMFORT EC D5 180-E S2 Measurement unit
Bypass no -
Voltage 230 V
Phase 1 ˜
Frequency 50/60 Hz
Power 87 W
Total unit current 0.71 A
RPM 2200 min-1
Air capacity 220 m³/h
Air capacity 61 l/s
Sound pressure level at 3 m distance 33 dBА
Temperature of transported air -25…+40 °С
EC motor yes -
Insulating material 15-30 mm, EPP mm
Extract filter G4 -
Supply filter G4, F7 -
Heat recovery efficiency 79-94 %
Heat exchanger type counter-flow -
Heat exchanger material enthalpy -
Connected air duct diameter 150 mm
Weight 14 kg
Casing material EPP -
Type Supply and exhaust -
SEC class A -
Mounting ceiling mounting, wall mounting -
ErP 2016, 2018 -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
KOMFORT EC D5(B)180(-E) - data sheet (pdf 1.13Mb)
KOMFORT EC D5(B)180(-E) - user's manual (pdf 2.55Mb)
KOMFORT EC D5 180(-E) S2 - image (png 286.75Kb)
KOMFORT EC D5 180-E S2 - energy label (pdf 56.9Kb)
KOMFORT EC D5 180-E S2 - specification (pdf 35.15Kb)
Designation key
Designation key
Series Motor type Spigot orientation Casing modification Bypass Nominal air flow [m³/h] Heat exchanger type Control
KOMFORT EC: electronically commutated motor D: suspended mounting, horizontally oriented spigots 5: EPP _: without a bypass

B: integrated bypass
180 _: heat recovery

–E: energy recovery


    KOMFORT EC D5 180-E S2
G4 panel filter  FP 214x186x18 G4
F7 panel filter  FP 214x186x48 F7
Control panel -
Wi-Fi control panel -
LCD control panel -
Internal humidity sensor -
Humidity sensor -
CO₂ sensor with indication -
CO₂ sensor -
VOC sensor   -
CO₂ sensor   -
Humidity sensor   -
Electrical preheater   -
Electrical reheater   -
Syphon kit
(for the units without an enthalpy heat exchanger)
SFK 20x32
Air damper -
Electric actuator -

Model Overall dimensions [mm]
Ø D B L L1 H
KOMFORT EC D5 180-E S2 150 600 900 1009 264
Additional characteristics
Additional characteristics
Point Unit power [W] Sound pressure level at 3 m (1 m) [dBA]
1 77 33 (43)
2 64 33 (43)
3 53 32 (42)
4 31 29 (39)
5 30 28 (38)
6 26 27 (37)
7 14 23 (33)
8 13 21 (31)
9 12 19 (29)


Sound power level, A-weighted Total Octave frequency band [Hz] LpA 3 m [dBA] LpA 1 m [dBA]
63 125 250 500 1000 2000 4000 8000
LwA to supply inlet [dBA] 59 27 46 54 55 53 48 44 35    
LwA to supply outlet [dBA] 60 27 46 54 55 53 49 44 35    
LwA to exhaust inlet [dBA] 55 25 41 50 51 44 42 39 30    
LwA to exhaust outlet [dBA] 55 26 41 51 51 44 42 39 31    
LwA to environment [dBA] 54 18 36 47 49 48 43 37 33 33 43

* Data provided for point 1 of the air flow diagram



Exhaust spigot configuration Air flow rate [l/s] Specific fan power [W/l/s] Heat exchange efficiency [%]
Kitchen + 1 additional wet room 21 0.90 88
Kitchen + 2 additional wet rooms 29 1.00 86
Kitchen + 3 additional wet rooms 37 1.20 85


Calculation of air temperature downstream of the heat exchanger:
t = toutd + khr × (textr - toutd) / 100,

where toutd – outdoor air temperature [°C] textr – extract air temperature [°C] khr – heat exchanger efficiency (according to the diagram) [%]

AccessoriesSimilar products