Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts

Privacy policy

Blauberg KOMFORT EC DW1000-4

Suspended heat recovery air handling unit. Maximum air capacity up to 1000 m³/h.
EAN codeEAN4058448021435
  • Description
  • Characteristics
  • Downloads
  • Designation key
  • Accessories

Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.Heat recovery minimises ventilation heat losses.Provide controllable air exchange to create the best suitable indoor microclimate.Compatible with round Ø 200 to 400 mm round air ducts.


The casing is made of double-skinned aluzinc panels, internally filled with 20 or 25 mm mineral wool layer for heat and sound insulation.The casing has fixing brackets with vibration absorbing connectors for easy installation.The spigots for connection to the air ducts are located at the side of the unit and are rubber sealed for airtight connection to the air ducts.The service panel ensures easy access to the internals for cleaning, filter replacement and other maintenance operations.

High-efficient external rotor EC motors and centrifugal impellers with backward curved blades are used for air supply and exhaust.EC motors have the best power consumption to air flow ratio and meet the latest demands concerning energy saving and high-efficient ventilation.EC motors are featured with high performance, low noise level and totally controllable speed range.Dynamically balanced impellers.


The unit is equipped with a plate cross-flow (KOMFORT EC DW600/1000) or a plate counter-flow (KOMFORT EC DW2000/2800) aluminium heat exchanger for heat recovery. In the unit condensate is collected and drained to the drain pan under the heat exchanger.
The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively.In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.

FREEZE PROTECTIONThe electronic frost protection system based on bypass and heater is used to prevent the heat exchanger freezing in cold seasons. The bypass damper is opened and the heater is turned on automatically according to the feedback from the temperature sensor. Cold intake air passes by the heat exchanger and is warmed up to set temperature in the heat exchanger. Synchronously extract air that passes by the heat exchanger is used for its defrosting. After a freezing danger is over the bypass damper is closed, the heater is turned off. The unit reverts to the normal operation mode.

The built-in G4 supply filter and G4 extract filter provide air filtration.


The unit incorporates an integrated control system with a wall-mounted control panel and a sensor display.
The standard delivery set includes a 10 m cable for connection of the unit and the control panel.Automation functions:

  • Activating/deactivating the unit.
  • Setting required speed for the supply and extract fan for the unit air flow control. Each speed is individually adjusted during set-up.
  • Set supply air temperature maintaining by means of the circulating pump and heat medium regulating valve control.
  • Water heater freezing protection on feedback from the temperature sensor downstream of the water heating coils and the return water temperature sensor.
  • Pre-heating cycle prior to the heater start and maintaining set return water temperature during the fan shutoff.
  • Opening/closing the bypass damper for summer ventilation.
  • Setting and maintaining room or duct air temperature.
  • Timer activation/deactivation and set-up.
  • Setting day- and week-scheduled operation of the unit.
  • Operation control on feedback from FS1 duct humidity sensor (to be ordered separately) or on the humidity sensor in the control panel.
  • Filter clogging control.
  • System shutdown on signal from the fire alarm panel.
  • Controlling supply and exhaust air dampers (to be ordered separately).
  • Cooler control (to be ordered separately).

The unit is equipped with a water (glycol) heater for operation at low outside air temperature.The integrated water heater is activated to warm up supply air flow if set indoor air temperature may not be reached by means of heat recovery only.Heat medium temperature control ensures supply air temperature maintaining.The air temperature sensor downstream of the waterheating coils and the return water temperature sensor are used for freezing protection of the water heater.


Mounting to the ceiling with fixing brackets.The correct mounted unit must provide free condensate collection and drainage as well as good access for servicing and filter replacement.Servicing access:

  • KOMFORT EC DW600/1000: on the right or left panel side;
  • KOMFORT EC DW2000/3800: on the bottom.
Parameter KOMFORT EC DW1000-4 Measurement unit
Number of water coil rows 4 -
Voltage 230 V
Phase 1 ˜
Frequency 50/60 Hz
Current 2.26 A
Power 400 W
RPM 2780 min-1
Air capacity 1000 m³/h
Air capacity 278 l/s
Sound pressure level at 3 m distance 52 dBА
EC motor yes -
Temperature of transported air -25…+40 °С
Insulating material 20 mm mineral wool mm
Extract filter G4 -
Supply filter G4 -
Heat recovery efficiency 90 %
Heat exchanger type counter-flow -
Heat exchanger material aluminum -
Weight 98 kg
Connected air duct diameter 250 mm
Casing material aluzinc -
SEC class NRVU* -
Mounting ceiling mounting -
ErP 2016, 2018 -
Documents archieve
Documents archieve
KOMFORT ЕС DW - data sheet (pdf 1.47Mb)
KOMFORT ЕС DW - user manual (pdf 7.69Mb)
KOMFORT ЕС DW600/1000 - image (png 378.8Kb)
KOMFORT EC DW 1000-4-R - Energy label (PDF 55.65Kb)
KOMFORT EC DW 1000-4-L - Energy label (PDF 55.64Kb)
KOMFORT EC DW 1000-4-R - Specification (PDF 34.96Kb)
KOMFORT EC DW 1000-4-L - Specification (PDF 34.96Kb)

Model Dimensions [mm]
D B B1 B2 H H1 L L1
KOMFORT EC DW1000-4 249 1350 1215 607.5 317 143 1346 1395
Designation key
Designation key
Series Motor type Mounting type Heater type Nominal air flow [m³/h]   Number of water coil rows Service side
KOMFORT EC: electronically commutated motor D: suspended mounting, horizontally oriented spigots W: water heater 600; 1000; 2000; 3800 - 2; 4 L: Left
R: Right
    KOMFORT EC DW1000-4
G4 panel filter   FP 647х274х20 G4
G4 pocket filter FPT 647x274x27 G4
Silencer SD 250
Silencer   SDF 250
Water mixing unit WMG
Backdraft air damper   VRV 250
Air damper VKA 250
Internal humidity sensor   FS1
Electric actuator   LF230
Electric actuator   TF230