Blauberg KOMFORT EC SB250-E
Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.
The casing is made of double-skinned polymer coated steel panels, internally filled with 30 mm mineral wool layer for heat and sound insulation.The hinged panel of the casing ensures easy access to the internals for cleaning and other maintenance operations.The spigots for connection to the air ducts are located at the top of the unit and are rubber sealed for airtight connection to the air ducts.
High-efficient external rotor EC motors and centrifugal impellers with forward curved blades are used for air supply and exhaust.EC motors have the best power consumption to air capacity ratio and meet the latest demands concerning energy saving and high-efficient ventilation.EC motors are featured with high performance, low noise level and totally controllable speed range.Dynamically balanced impellers.
BYPASSThe KOMFORT EC SB units are equipped with a 100% bypass for summer cooling ventilation mode.
KOMFORT EC S(B)200(-E) units have two integrated cassette G3 filters for air supply and air extract.KOMFORT EC S(B)250(-E) units have a G4 cassette supply air filter, a F7 cassette supply air filter for extra efficient filtration and a G4 extract air filter.
The KOMFORT S(SB)200(250) unit is equipped with a plate counterflow polysterene heat exchanger that recovers heat. The drain pan under the heat exchanger block of the KOMFORT S(SB)200(250) is used for condensate collection and drainage.The KOMFORT S(SB)200(250)-E unit is equipped with a plate enthalpy counter-flow heat exchanger made of enthalpic membrane that recovers heat and humidity.
|CONTROL AND AUTOMATION
KOMFORT EC S S11 / KOMFORT EC SB S11 units incorporate an integrated control system with the S11 wallmounted control panel with an LCD display.
KOMFORT EC S S14 / KOMFORT EC SB S14 units incorporate an integrated control system with the S14 wallmounted control panel with a LED indication. The units are equipped with the Type B USB Connector for advanced options setting in a special software.
The standard delivery set includes a 10 m cable for connection of the unit and the control panel.S11 automation functions:
S14 automation functions:
Extra functions of the S14 automation with the installed software:
The units are designed for wall mounting.The casing is versatile. The side of air ducts connection may be changed by turning the unit by 180° and reversing the front and the back panels.The mounting place must provide sufficient access for connection to drain system and condensate drainage using the 20x32 KIT SFK kit (available as a specially ordered accessory).
|Parameter||KOMFORT EC SB250-E||Measurement unit|
|Maximum load current||0.81||A|
|Maximum air capacity||290||m³/h|
|Total unit power||130||W|
|Sound pressure level at 3 m distance||25||dBА|
|Insulating material||30 mm mineral wool||mm|
|Transported air temperature||-25 +60||°С|
|Supply filter||G4, F7||-|
|Heat recovery efficiency||77-90||%|
|Heat exchanger type||counter-flow||-|
|Heat exchanger material||enthalpy||-|
|Connected air duct diameter||160||mm|
|Casing material||polymer coated steel||-|
|Air duct||for round air ducts||-|
|KOMFORT EC S250(-E) S14
KOMFORT EC SB250(-E) S14
|KOMFORT EC S250(-E) S11
KOMFORT EC SB250(-E) S11
|G3 cassette filter
|G4 cassette filter
||FP 200х417х18 G4|
|F7 cassette filter
||FP 200х417х18 F7|
|Internal humidity sensor
|Internal humidity sensor
|External CO2 sensor
| External CO2 sensor with indication
|External humidity sensor
||SB C6 366/384|