Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts

Privacy policy

Blauberg KOMFORT Roto EC D 650 L S21

Air handling units with rotary heat exchanger. Maximum air flow up to 710 m³/h.
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
  • Dimensions
  • Additional characteristics

Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings. Heat recovery is provided by the rotary heat exchanger and minimizes ventilation heat losses. Controllable air exchange for creating the best suitable indoor microclimate. Compatible with round Ø 160 and 200 mm air ducts. Additional spigot for kitchen hood air duct connection.


The fan casing is made of galvanized steel soundproofed on the inside with mineral wool. The spigots are located at the sides of the unit and are rubber sealed for airtight connection to the air ducts. KOMFORT Roto EC D(2) – model without electric heater. KOMFORT Roto EC D(2)E – model with electric heater. The insulation of KOMFORT Roto EC D(E) is 40 mm, for KOMFORT Roto EC D2(E) is 20 mm. Unit maintenance is performed from the bottom panel side. The distinctive feature of KOMFORT Roto EC D2(E) is a low casing profile.



High-efficient external rotor EC motors and centrifugal impellers are used for air supply and exhaust. EC motors have the best power consumption to air flow ratio and meet the latest demands concerning energy saving and high-efficient ventilation. EC motors are featured with high performance, low noise level and totally controllable speed range. Dynamically balanced impellers.


Two built-in filters with G4 and F7 filtration class provide efficient supply air filtration. Optionally, a H13 supply air filter may be used. The G4 filter is used for extract air filtration.


The air handling unit is designed for wall, wand or floor mounting.



All the models are equipped with a fifth spigot for connection of the air duct from the kitchen hood.


The unit has a high-efficient rotary aluminium heat exchanger. The rotary regenerator is a short, rotating cylinder, filled with corrugated aluminium sheet layers. The air streams flow through them. The band layers of the heat regenerator first come in contact with the supply and then with extract air flows. Therefore the band is alternatively warmed up and cooled down and the extract air heat and humidity are transferred to the cold intake air. This way heat recovery reduces heat losses in the cold season and reduces operation load for air conditioner in the warm season. The advantages of the rotary regenerator as compared to the plate heat exchangers include no condensate generation, maintaining comfort air humidity and high freeze resistance.


The KOMFORT Roto EC D(2)E units are equipped with the electric heater. If the necessary temperature level of the supply air cannot be achieved through heat recovery, the heater turns on automatically and heats the air supplied to the premise. The heaters incorporate protective measures securing the safe unit operation.


KOMFORT Roto EC D ... S21 units are equipped with an integrated automation system. The remote control panel is not included in the delivery set (purchased separately). The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System). The unit can be controlled via the Blauberg AHU mobile application via Wi-Fi.

the Blauberg AHU
app for Android

the Blauberg AHU
app for iOS

Functions KOMFORT ROTO EC D(2)(E) S21
Control via Wi-Fi using a mobile application +
Control via a wired remote control panel
S22 control panel (option)
Control via a wireless remote control panel
S22 Wi-Fi control panel (option)
Control via a wired remote LCD control panel
S25 control panel (option)
BMS (Building Management Systems) RS-485
Blauberg Cloud Server service +
Speed selection +
Filter replacement indication by filter timer
Alarm indication full alarm description in the mobile application
Week-scheduled operation +
Timers +
Boost mode +
Fireplace mode +
Cooler connection option
Kitchen hood connection option
Minimum supply air temperature control +
Humidity control option
CO2 controller option
VOC controller option
PM2.5 controller option
Fire alarm sensor connection option
option: function is available when purchasing the appropriate accessory (see the "Accessories" tab).
Parameter KOMFORT Roto EC D 650 L S21 Measurement unit
Voltage 230 V
Phase 1 ˜
Frequency 50/60 Hz
Max. power without electric heater 367 W
Max. unit power 367 W
Max. unit current without electric heater 2.5 A
Max. unit current 2.5 A
RPM 3600 min-1
Maximum air flow 197 l/s
Maximum air flow 710 m³/h
Sound pressure level at a distance of 3 m 36 dBА
Temperature of transported air -25...+40 °С
EC motor yes -
Insulating material 40 mm mineral wool mm
Extract filter G4 -
Supply filter G4, F7 (Option: H13) -
Heat recovery efficiency 80–87 %
Heat exchanger type rotary -
Heat exchanger material aluminum -
Weight 102 kg
Connected air duct diameter 200 mm
Casing material galvanized steel -
Outdoor mounting no -
Sound-insulated casing yes -
SEC class A -
Mounting ceiling mounting, wall mounting -
ErP 2016, 2018 -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
KOMFORT Roto EC D S21 - data sheet (pdf 1.61Mb)
KOMFORT Roto EC D S21 - image (png 310.97Kb)
KOMFORT Roto EC D650 S21 - energy label (pdf 93.98Kb)
KOMFORT Roto EC D650 S21 - specification (pdf 74.6Kb)
S21 - user's manual (pdf 2.22Mb)
Modbus table for connecting S21 automation to BMS - user's manual (pdf 140.84Kb)
Designation key
Designation key
Series Unit type Motor type Mounting type Modification Heater type Rated air flow [m³/h] Service side Control
KOMFORT Roto: rotary heat exchanger EC: electronically commutated motor D: suspended mounting, horizontally directed spigots _: standard (insulation 40 mm)

2: low-profile (insulation 20 mm)
_: no heater

E: electric heater
250; 350; 650 L: left

R: right
  KOMFORT Roto EC D 650 L S21
G4 panel filter FP 378x295x48 G4
F7 panel filter FP 378x295x48 F7
H13 panel filter FP 378x295x48 H13
Control panel S22
Wi-Fi control panel S22 Wi-Fi
LCD Control panel S25
VOC sensor DPWQ30600
External CO2 sensor DPQW40200
Humidity sensor DPWС11200
Humidity sensor HR-S
Internal humidity sensor FS2
Kitchen hood DAH 251-13
Backdraft air damper VRV 200
Air damper VKA 200
Electric actuator LF230
Electric actuator TF230

Model Overall dimensions [mm]
ØD B B1 H H1 L L1
KOMFORT Roto EC D 650 L S21 200 897 932 409 422 1445 1542
Additional characteristics
Additional characteristics
Point Total power of the unit [W] Sound pressure level at 3 m (1 m) [dBA]
1 342 36 (46)
2 342 36 (46)
3 342 35 (45)
4 122 31 (41)
5 122 29 (39)
6 122 29 (39)
7 34 27 (37)
8 33 24 (34)
9 33 24 (34)


Sound power level, A-weighted Total Octave frequency band [Hz] LpA 3 m LpA 1 m
63 125 250 500 1000 2000 4000 8000
LwA to supply inlet [dBA] 79 56 62 64 74 72 74 71 66    
LwA to supply outlet [dBA] 68 48 51 57 67 52 49 42 30    
LwA to exhaust inlet [dBA] 81 55 60 64 77 73 75 71 66    
LwA to exhaust outlet [dBA] 67 47 51 58 65 58 57 48 39    
LwA to environment [dBA] 57 30 46 45 55 46 47 39 38 36 46

* Data provided for point 1 of the air flow diagram


Calculation of air temperature downstream of the heat exchanger:
t = toutd + khr × (textr - toutd) / 100,

where toutd – outdoor air temperature [°C] textr – extract air temperature [°C] khr – heat exchanger efficiency (according to the diagram) [%]

AccessoriesSimilar products