Blauberg Sileo DC 100 T

Print version

High-performance low noise extract fans with energy-efficient DC motors. Maximum air capacity up to 101 m³/h.

EAN 4058448052576

Add to project

To comparison

Description
Characteristics
Capacity diagram
Downloads
Options

Description

FEATURES

The casing and the impeller are made of highquality and durable UV-resistant plastic.
The specially designed aerodynamic profile of the mixed-flow impeller provides high air flow and pressure combined with low-noise operation.A shortened spigot for mounting into a ventilation shaft or direct connection to Ø 100 mm air duct.The fan is equipped with a specially designed backdraft damper to prevent back flow and heat losses during the fan standby.The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulance, noise level and boost air pressure.High ingress protection rating makes the fan the ideal solution for ventilation of a bathroom.The electronic components are protected with tight covers. Turn-off delay timer. Adjustable delay from 2 up to 30 min.

OPTIONS

OPERATING MODE

Model	Sileo DC 100
Option	H	IR
Turn-off delay timer	•	•
Humidity sensor	•
Motion sensor		•

Humidity sensor

Humidity setpoint adjustable from 60 % up to 90 %.

Motion sensor

Detection range from 1 up to 4 m.
Detection angle up to 100°.

Operation mode selection and setup for Sileo DC 100 models with modifications T, H, IR is performed by setting the DIP switch to a respective position.
MODE 1 (SINGLE-SPEED MODE)

The fan is turned off by default. The fan starts operating at the low speed when the switch is closed or one of the sensors is activated.

MODE 2 (SINGLE-SPEED MODE)

The fan is turned off by default. The fan starts operating at the high speed when the switch is closed or one of the sensors is activated.

MODE 3 (TWO-SPEED MODE)

The fan operates at the low speed by default. The fan switches to the high speed when the switch is closed or the sensors are activated.

MODE 4 (TWO-SPEED MODE)

The fan is turned off by default. The fan starts operating at the low speed when the switch is closed and switches to the high speed when the humidity or motion sensor is activated.

MOUNTING

MOTOR

Direct installation into a ventilation shaft.Flexible air ducts may be used in case of remote location of the ventilation shaft The air duct is connected to the exhaust spigot with a fixing clamp. Wall mounting with screws.Suitable for ceiling mounting.

Low energy demand up to 3.5 W due to a new high-efficient DC motor.Maintenance-free bearings contain enough grease for 40 000 hrs non-stop operation.Motor equipped with electric overheating protection.

Characteristics

Parameter	Sileo DC 100 T min	Sileo DC 100 T max	Measurement unit
Voltage	220-240	220-240	V
Power	1.5	3.5	W
Frequency	50/60	50/60	Hz
Current	0.063	0.137	A
RPM	1850	2650	min^-1
SFP	0.08	0.12	W/l/s
Sound pressure level	22*	27*	dBА
Mounting	ceiling mounting , wall mounting	ceiling mounting , wall mounting	-
Casing material	plastic	plastic	-
Maximum air flow	19	28	l/s
Maximum air flow	70	101	m³/h
*	Sound pressure level measured in free space at a distance of 3 meters from the fan	Sound pressure level measured in free space at a distance of 3 meters from the fan	-

Capacity diagram

Selection method:
Air capacity:
Pressure:

Operating point

Air capacity: --
Pressure: ---

Documents archieve

Name

Download

Show

Sileo DC - data sheet (pdf 588.84Kb)

Sileo DC - images (png 586.09Kb)

Sileo (Design) DC - user's manual (pdf 4.39Mb)

Modifications

Modification name	Timer	Interval Timer
Sileo DC 100 T			+