Domestic fans
Industrial fans
Single-room air handling units with heat recovery
Air handling units 
Smoke extraction and ventilation
Ventilation accessories
Ventilation ducts and fittings
Air distribution
Measurement and control technology
Ventilation sets and ventsBlauberg BELIMO CM230
- Description
- Characteristics
- Downloads
- DIMENSIONS
- WIRING DIAGRAM
Description
Description
| FEATURES
For controlling air dampers with cross section up to 0.4 m² installed in various ventilation and air conditioning systems. CONTROLThe air flow control damper can be controlled by means of the three-point or open-close controlling. |
DESIGN
The electric actuator is provided with a 2 Nm actuating torque and an overload protection. The actuator is installed directly on the air damper shaft. The angle of rotation is adjusted by mechanical end stops. |
Characteristics
Characteristics
| Parameter | BELIMO CM230 | Measurement unit |
|---|---|---|
| Voltage | 230 | V |
| Frequency | 50/60 | Hz |
| Nominal voltage range | 85...265 ~ | V |
| Rated power | 2 | VA |
| Power consumption in operation | 1 | W |
| Power consumption at rest | 1 | W |
| Connecting cable | 1 m long, 3 x 0.75 mm2 | - |
| Positioning accuracy | ± 5 | % |
| Sound pressure level | 35 | dBА |
| Direction of rotation | determined by terminal connection | - |
| Torque | 2 (at nominal voltage) | Nm |
| Angle of rotation no end stop | endless fixed 315° | - |
| Angle of rotation with an end stop | adjustable 0...287.5° in 2.5° increments | - |
| Electrical protection class | III low voltage, II totally insulated | - |
| Operation temperature | -30…+50 | °С |
| Swing time | 75 sec / 90° | sec |
| Storage temperature | -40…+80 | °С |
| Ingress protection rating | IP54 | - |
| Position indication | mechanical | - |
| Ambient humidity | 95 %, no condensation | % |
| Maintenance | not required | - |
| Weight | 0.13 | kg |
Documents archieve
Documents archieve
Select a document type
DIMENSIONS
DIMENSIONS
WIRING DIAGRAM
WIRING DIAGRAM
