Blauberg BELIMO TF24
- Description
- Characteristics
- Downloads
- DIMENSIONS
- WIRING DIAGRAM
Description
Description
FEATURES
For controlling air dampers with cross section up to 0.4 m² installed in various ventilation and air conditioning systems and performing protection functions. |
DESIGN
The electric actuator is provided with a 2 Nm actuating torque and an overload protection. The actuator is installed directly on the air damper shaft. The actuator is equipped with a return spring, which moves the damper to its operating position while tensioning the return spring at the same time. In case of power supply cut-off, the damper moves back to its safe position by the spring energy. The angle of rotation is adjusted by mechanical end stops. |
Characteristics
Characteristics
Parameter | BELIMO TF24 | Measurement unit |
---|---|---|
Voltage | 24 | V |
Frequency | 50/60 | Hz |
Nominal voltage range |
19.2...28.8 ~ 21.6…28.8 = |
V |
Rated power | 4 (max. I 5.8 А at t = 5 ms) | VA |
Power consumption in operation | 2 | W |
Power consumption at rest | 1.3 | W |
Connecting cable | 1 m long, 2 x 0.75 mm2 | - |
Direction of rotation | determined by L/R positioning | - |
Torque motor | 2 (at nominal voltage) | Nm |
Torque spring | 2 | Nm |
Electrical protection class | III low voltage, II totally insulated | - |
Service life | 60 000 switching operations | - |
Angle of rotation | max. 95°, adjustable 37…100 % with a mechanical end stop | - |
Operation temperature | -30…+50 | °С |
Swing time motor | 40…75 (0…2 Nm) | sec |
Storage temperature | -40…+80 | °С |
Swing time spring | < 25 at -20…50°С | sec |
Ingress protection rating | IP42 | - |
Ambient humidity | 95 %, no condensation | % |
Noise level motor | 50 | dBА |
Noise level spring | ≈ 62 | dBА |
Maintenance | not required | - |
Weight | 0.6 | kg |
Documents archieve
Documents archieve
Select a document type
DIMENSIONS
DIMENSIONS
WIRING DIAGRAM
WIRING DIAGRAM
Similar products