Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy

Blauberg Iso-Primo EC 200


Sound-insulated inline mixed-flow fans with EC motor. Maximum air flow up to 1210 m³/h.
EAN codeEAN4058448087394
  • Description
  • Characteristics
  • Downloads
  • Additional characteristics
  • Dimensions
  • Designation key
  • Accessories
Description
Description
USE MOTOR

Combined supply and exhaust ventilation systems of various commercial and industrial spaces with stringent noise requirements (such as libraries, conference halls, classrooms, kindergarten playrooms etc.).For ventilation air ducts requiring high pressure, powerful air flow and low noise level.Compatible with ∅ 200 up to ∅ 250 mm air ducts.

High-efficient direct current EC motor.EC technology meets the up-to-date requirements to energy-saving and controllable ventilation and provides up to 35 % energy saving as compared to asynchronous motors.EC motor ensures totally controllable speed range for the fan and has integrated overheating protection with restart.EC motor has no friction and wearing parts as capacitor und brushes. Instead a maintenance-free EC controller electronic circuit board is used.The impeller is dynamically balanced.

FEATURES SPEED CONTROL

The new series of Iso-Primo EC duct fan series is provided with a special sound-insulated casing which ensures silent operation and excellent aerodynamic characteristics.Iso-Primo EC fans combine the versatility and outstanding performance of both axial and centrifugal fans producing a powerful air flow and high pressure while retaining the signature energy-efficiency and response of EC motors.Several fans can be integrated into a single computer-controlled system with sensor feedback combined with speed control across the entire dynamic range.

The fan speed is controlled with a 0–10 V control signal from the following sources:

• integrated or external speed controller• controller with sensors
• central BMS system.

The control signal value changes depending on air temperature, pressure, smoke concentration and other parameters.During signal value change the fan with EC motor correspondingly changes the rotations speed and delivers required air volume to the ventilation system.The computer central building management systems (BMS) enable integration of several EC motors in network and precise individual operation control for each fan.

DESIGN MOUNTING

The external casing is made of galvanized steel.Noise and heat insulation is ensured by a acoustic foam layer 30 mm in thickness.The inner casing and the impeller are made of durable high-quality plastic.Due to the conically shaped polymer impeller with specially profiled blades, the air stream circular velocity increases, which results in higher air flow and pressure, as compared to characteristics of standard axial fans. The specially designed diffuser, impeller and airflow rectifier at the fan outlet provide smooth air flow distribution and enable the best combination of high capacity, powerful pressure and low noise.The fan casing is equipped with an external water-tight terminal box for electrical connections.

The fans are designed to be used with round air ducts.The fan casing has mounting brackets for convenient installation to the ceiling. The ducts can be fitted at any angle relative to the fan axis.Make sure to provide sufficient maintenance access during fan installation. Electrical connection and installation must be performed in accordance with the instruction manual and the electrical connections diagram applied to the terminal box.A single system may have several fans installed in parallel to boost the output capacity or in series to boost the working pressure.

Characteristics
Characteristics
Parameter Iso-Primo EC 200 Measurement unit
Voltage 230 V
Phase 1 ˜
Voltage 230 V
Frequency 50 Hz
Current 0.96 A
Power 121 W
RPM 3100 min-1
Maximum air flow 336 l/s
Maximum air flow 1210 m³/h
Sound pressure level at 3 m 47 dBА
Transported air temperature -25...+55 °С
Motor IP rating IP44 -
Ingress protection rating IPX4 -
EC motor yes -
Casing material galvanized steel -
Outdoor mounting no -
Sound-insulated casing yes -
Air duct for round air ducts -
Design mixed-flow -
Type Exhaust, Supply, Supply and exhaust -
Weight 8.2 kg
Mounting Inline -
ErP 2018 -
Documents archieve
Documents archieve
Select a document type
  • Catalogues
  • Technical documentation
  • Certificates
Name
Iso-Primo EC - data sheet (pdf 642.83Kb)
Iso-Primo EC - image (png 477.25Kb)
Iso-Primo (EC) - user's manual (pdf 1.01Mb)
Additional characteristics
Additional characteristics
Sound power level, A-weighted Total Octave frequency bands [Hz] LpA 3 m LpA 1 m
63 125 250 500 1000 2000 4000 8000
LwA to inlet [dBA] 71 67 67 63 59 50 45 44 40 51 61
LwA to outlet [dBA] 72 68 68 63 61 52 48 47 38 52 62
LwA to environment [dBA] 68 58 54 64 63 42 42 30 23 47 57
Dimensions
Dimensions

Model Overall dimensions [mm]
∅ D ∅ D1 H L L1
Iso-Primo ЕС 200 (G1, GI1, W, FR1) 198 281 339 601 739
Designation key
Designation key
Series Motor type Spigot diameter [mm]
Iso-Primo EC: electronically commutated motor 200; 250
Accessories
Accessories
Silencers
Filter boxes
Electric heaters Water heaters Backdraft air dampers
Air dampers
Clamps Temperature controllers
Speed controllers
Timers/Sensors
                    
SD KFBK / KFBT EKH WKH

VRV

VK / VKA  K MLCD E2  CDP / CDT TE(TI) / HSE(HSI) / LSE(LSI) / IRSE(IRSI)