Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy

Blauberg KOMFORT ERV D150 S20


Suspended heat and energy recovery air handling unit. Maximum air flow up to 230 m³/h.
EAN codeEAN4058448001505
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Designation key
  • Dimensions
  • Accessories
Description
Description
FEATURES

Air handling unit for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings. Heat and humidity recovery minimizes ventilation heat losses during cold season and reduce air conditioner load during hot season. Controllable air exchange ensures the best suitable indoor microclimate. Compatible with round Ø 100 or 150 mm air ducts.

DESIGN

The casing is made of polymer coated steel panels, internally heat- and sound-insulated with 5–10 mm (depend on modification) polyurethane foam. The bottom service panel provides easy access for maintenance of the filters and the heat exchanger. The spigots for connection to the air ducts are located at the sides of the unit and are rubbed sealed for airtight connection to the air ducts. The mounting brackets on the casing ensure easy installation underthe ceiling.

FANS

Asynchronous motors are used for air supply and exhaust. KOMFORT ERV D150 S20, KOMFORT ERV D250 S20 and KOMFORT ERV D350 S20 are equipped with a centrifugal impeller with forward curved blades. Integrated overheating protection with automatic restart. Ball bearings for longer service life. Dynamically balanced impellers. Featured with reliable and low-noise operation.

HEAT RECOVERY

The unit is equipped with an enthalpy plate cross-flow heat exchanger for enegry (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger. The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air. Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively. In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.

FROST PROTECTION

The integrated automatic freeze protection is used to prevent freezing of the heat exchanger in the cold season. The supply fan turns off according to the temperature sensor to get the heat exchanger warmed up with extract air. After that the supply fan turns on and the unit continues to run in the standard mode.

CONTROL AND AUTOMATION

Integrated control system based on triac speed controller CDT1 E.

AIR FILTRATION

Two built-in G4 and F8 filters provide efficient supply air filtration. The G4 filter is used for extract air filtration.

MOUNTING

Due to the low casing height the unit is the ideal solution for mounting in the limited space behind the suspended ceiling. The installation place must be easily accessible for servicing.

Characteristics
Characteristics
Parameter KOMFORT ERV D150 S20 Measurement unit
Voltage 230 V
Phase 1 ˜
Frequency 50/60 Hz
RPM 2235 min-1
Total unit current 0.6 A
Air capacity 230 m³/h
Air capacity 64 l/s
Total unit power 125 W
Sound pressure level at 3 m distance 49 dBА
Temperature of transported air -25...+40 °С
EC motor no -
Insulating material 5 mm, 10 mm mm
Supply filter G4+F8 (PM2.5 93 %) -
Extract filter G4 -
Heat recovery efficiency 72-87 %
Moisture recovery efficiency 27-47 %
Heat exchanger type cross-flow -
Heat exchanger material enthalpy -
Connected air duct diameter 100 mm
Outdoor mounting no -
Sound-insulated casing yes -
Air duct for round air ducts -
Type Supply and exhaust -
SEC class D -
Mounting ceiling mounting -
ErP 2016 -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
Name
KOMFORT ERV D S20 - data sheet (pdf 892.97Kb)
KOMFORT ERV D S20 - image (png 250.62Kb)
KOMFORT ERV D S20 - user's manual (pdf 1.65Mb)
KOMFORT ERV D150 S20 - energy label (pdf 56.22Kb)
KOMFORT ERV D150 S20 - specification (pdf 34.73Kb)
Designation key
Designation key
Series Unit type Mounting type Nominal air flow [m³/h] Control
KOMFORT ERV: energy recovery ventilation D: suspended mounting, horizontally oriented spigots 150; 250; 350 S20: speed controller CDT1 E
Dimensions
Dimensions

Model Overall dimensions [mm]
ØD B H L L1
KOMFORT ERV D150 S20 99 704 227 947 854
Accessories
Accessories
  KOMFORT ERV D150 S20 KOMFORT ERV D250 S20 KOMFORT ERV D350 S20
G4 panel filter FP 300x220x48 G4 FP 300x220x48 G4 FP 300x270x48 G4
F8 panel filter FP 300x220x48 F8 FP 300x220x48 F8 FP 300x270x48 F8