Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts

Privacy policy

Blauberg KOMFORT S5 230 S4

Heat recovery air handling units. Maximum air capacity up to 230 m³/h.
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.Heat recovery minimizes ventilation heat losses during cold season and reduces air conditioner load during hot season.Controllable air exchange provides the best indoor microclimate.Compatible with round Ø125 mm air ducts.

The casing is made of expanded polypropylene (EPP) plates, 15-30 mm thick, possessing high heat- and sound-insulating properties.The unit is equipped with service panels for convenient maintenance of filters and heat exchanger.The spigots are located at the top of the unit and are rubber sealed for airtight connection to the air ducts.

Single-phase three-speed external rotor motors with centrifugal impellers and forward curved blades.Integrated motor overheating protection with automatic restart.


The KOMFORT S5 230 unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. In the unit condensate is collected and drained to the drain pan under the heat exchanger.The KOMFORT S5 230-E unit is equipped with an enthalpy plate counter-flow heat exchanger for enegry (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger.The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively.In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.

FREEZE PROTECTIONThe freeze protection of the heat exchanger is activated by shutdown on the supply fan as follows: in case of freezing danger communicated by the temperature sensor the supply fan turns off for the time required for defrosting of the heat exchanger with the warm extract air flow. After freezing danger is no longer imminent, the unit reverts to the standard operation mode.

The built-in G4 supply filter and G4 extract filter provide air filtration.A F8 supply filter (specially ordered accessory) may be used for efficient supply air filtration.


The units have integrated control system based on the mechanical three-speed speed switch CDP-3/5 (KOMFORT S5 230 S3) or sensor three-speed speed switch SGR-3/1 (KOMFORT S5 230 S4) and power cable with mains plug.
The control unit is integrated in the unit casing.The power and ground cables are connected to the control unit via the cable glands on the side of the unit.


The units are designed for wall and floor mounting.The universal casing design provides left- and right-sided mounting.

Parameter KOMFORT S5 230 S4 Measurement unit
Voltage 220-240 V
Phase 1 ˜
Frequency 50/60 Hz
Current 0.7 A
RPM 2720 min-1
Air capacity 230 m³/h
Air capacity 64 l/s
Sound pressure level at 3 m distance 35 dBА
Temperature of transported air -25…+40 °С
Insulating material 15-26 mm, EPP mm
Extract filter G4 -
Supply filter G4 (Option: F8) -
Heat recovery efficiency 87–98 %
Heat exchanger type counter-flow -
SEC class for S14 automation B -
Heat exchanger material polystyrene -
Connected air duct diameter 125 mm
Casing material EPP -
Weight 13 kg
ErP 2016 -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
KOMFORT S5 230(-E) - data sheet (pdf 987.12Kb)
KOMFORT S5 230(-E) S4 - image (png 438.47Kb)
Designation key
Designation key
Series Spigot modification Casing modification Nominal air flow [m³/h] Heat exchanger type Control
KOMFORT S: vertically oriented spigots 5: expanded polypropylene 230

_: heat recovery
–E: energy recovery

S3: mechanical speed switch CDP-3/5
S4: sensor speed switch SGR-3/1

Model Dimensions [mm]
D B H H1 L
KOMFORT S5 230(-E) 125 590 852 893 316
  KOMFORT S5 230 S4
G4 panel filter FP 264×182×18 G4
F8 panel filter FP 264×182×18 F8
Syphon kit SFK 20x32