Blauberg KOMFORT Ultra S250-E S12 white
Compact heat recovery air handling units. Maximum air capacity up to 250 m³/h.
- Capacity diagram
- Designation key
|Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.Heat and humidity recovery reduces ventilation heat losses in the cold season and the load on the air conditioners in the hot season.Control of air exchange for creating comfortable indoor microclimate.Compatible with round Ø125 mm air ducts.|
|The casing of KOMFORT Ultra S250-H(E) S12 is made of double-skinned aluzinc panels, internally filled with 20 mm, mineral wool layer for heat- and sound-insulation.
The casing of KOMFORT Ultra S250-H(E) S12 white is made of double-skinned white painted metal panels, internally filled with 20 mm, mineral wool layer for heat and sound insulation.
The spigots are located at the top of the unit and are rubber sealed for airtight connection to the air ducts.The hinged panel of the casing ensures easy access to the unit internals for service works including cleaning, filter replacement, etc.
|Asynchronous external rotor motors and centrifugal impellers with backward curved blades are used for air supply and exhaust.Integrated motor overheating protection with automatic restart.Dynamically balanced impellers.Equipped with ball bearings for longer service life.Reliable and quiet operation.|
|HEAT RECOVERY||AIR FILTRATION|
|The KOMFORT Ultra S250-H S12 (white) unit is equipped with a plate cross-flow polysterene heat exchanger that recovers heat.
The drain pan under the heat exchanger block of the KOMFORT Ultra S250-H S12 (white) is used for condensate collection and drainage.
The KOMFORT Ultra S250-E S12 (white) unit is equipped with a plate enthalpy cross-flow heat exchanger made of polymerized cellulose that recovers heat and humidity.
Due to humidity recovery the enthalpy heat exchanger produces no condensate. The air flows are fully separated within the heat exchanger. Odours and contaminants contained in the extract air are not transferred to the supply air flow.Heat recovery is based on heat and/or humidity transfer through the plates of the heat exchanger. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes heat losses, which reduces the cost of space heating. In summer the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. This reduces load on air conditioners and saves electricity.When the indoor and outdoor temperature difference is small heat recovery is not reasonable. In this case the heat exchanger can be temporary replaced with a summer block for warm seasons (available separately). FREEZE PROTECTION The electronic freeze protection system is used to prevent the heat exchanger freezing in cold seasons. In case of freezing danger communicated by the temperature sensor the supply fan is stopped to let warm extract air warm up the heat exchanger. After that the supply fan is turned on and the unit reverts to the normal operation mode.
|The built-in G4 supply filter and G4 extract filter provide air filtration.A F8 supply filter (specially ordered accessory) may be used for efficient supply air filtration.|
|CONTROL AND AUTOMATION|
|Smooth motor speed control from 0 up to 100 % by means of the thyristor speed controller SGS E1 (included in the delivery).|
|The units can be fixed to the wall or mounted on the floor using the mounting brackets. The KOMFORT Ultra S250-E S12 (white) unit is also suitable for ceiling mounting.
While mounting provide free access to the service panel for filter replacement and servicing.
The KOMFORT Ultra S250-H S12 (white) unit mounting position must provide condensate collection and drainage.Due to universal casing design both left and right mounting is possible. It requires swapping the service and the back panel.
|Parameter||KOMFORT Ultra S250-E S12 white||Measurement unit|
|Total unit current||0.78||A|
|Maximum air capacity||250||m³/h|
|Maximum air flow||69||l/s|
|Sound pressure level at 3 m distance||28-47||dBА|
|Temperature of transported air||-25...+40||°С|
|Insulating material||20 mm mineral wool||mm|
|Replaceable filter||G4 (F8 PM2.5 81 %)*||-|
|Heat recovery efficiency||52-73||%|
|Moisture recovery efficiency||27-45||%|
|Heat exchanger type||cross-flow||-|
|Heat exchanger material||polymerized cellulose||-|
|Casing material||painted steel||-|
|Air duct||for round air ducts||-|
|Type||Supply and exhaust||-|
|Mounting||ceiling mounting, wall mounting, floor mounting||-|
- Selection method:
- Air capacity:
- Air capacity: --
- Pressure: ---
|Series||Unit type||Spigot modification||Nominal air flow [m³/h]||Heat exchanger type||Control||Casing|
|KOMFORT||Ultra: compact unit||S: vertical spigot orientation||250||–||Н: heat recovery
Е: energy recovery
|S12: speed controller SGS E1||_: aluzinc
white: white-painted steel
|KOMFORT Ultra S250-H S12
KOMFORT Ultra S250-H S12 white
|KOMFORT Ultra S250-E S12
KOMFORT Ultra S250-E S12 white
|G4 panel filter||FP 240x184x40 G4|
|F8 panel filter||FP 240x184x40 F8|
|Backdraft air damper||VRV 125|
|Air damper||VK 125|
|Summer block||SB C4 200/240|
|KOMFORT Ultra S250-E S12 white||125||300||443||490||713||43|