Blauberg MLC E2

Automatic or manual temperature control in ventilation and air conditioning systems installed in various premises.Automatic regulation of heating/cooling rate.Control of fans, fancoil dampers and air heating units equipped with threespeed 230 V fans.

Control by control buttons on regulator casing or by remote control panel (MLCD E2 model).Manual or automatic regulation of indoor temperature. Fan speed high/ medium/low. On automatic mode fan speed is regulated by indoor temperature.Automatic regulation of heating/cooling rate in "Night mode":

• Cooling mode: 30 min after activation of the night mode the set temperature for the room automatically starts rising by 1 °C per hour within two hours and stays at this level. After 8 hours the timer turns off and the set temperature resets to initial position.
• Heating mode: 30 min after activation of the night mode the set temperature for the room automatically starts dropping by 1 °C per hour within three hours and stays at this level. After 8 hours the timer turns off and the set temperature resets to initial position.

The set control functions are saved when the thermal regulator is switched off.

Casing made of high-quality plastic.Equipped with a temperature sensor.LED display with illumination and control knobs incorporated in front panel.The display shows: set and current indoor temperature; operation mode for cooling, heating or auto; fan speed.IP40 ingress protection rating.

Model MLCD E2: the regulator is equipped with a remote control panel.

Indoor installation.Recommended installation height is 1.5 m above the floor level.Do not install the regulator close to windows, heating or cooling equipment.