Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts

Privacy policy

Blauberg Tower-V EC 355

Roof centrifugal fans with EC motor. Maximum air capacity up to 4500 m³/h.
EAN codeEAN4058448017865
  • Description
  • Characteristics
  • Downloads

Exhaust ventilation systems installed in various premises.Roof mounting.Any roof types or vertical ventilation shafts.For arranging energy-saving and controllable ventilation systems.


The casing is made of steel with a polymer atmospheric resistant coating.Vertical air exhaust.The fan is equipped with a terminal box for connection to power mains.The fan is rated for continuous operation always connected to power mains.The upper cover is equipped with two eye bolts for easy fan lifting on the roof with hoisting mechanism.A connecting plate is provided to facilitate mounting to the roof surface or to the mounting frame.


High-efficient direct current EC motor with external rotor and backward curved blades.EC technologies meet the latest requirements to arrange highefficient energy saving ventilation.EC motors have energy demand by 50 % less as compared to standard motors and have efficiency up to 90 %.EC motors are featured with high performance, low noise level and well controllable total speed range.Overheating protection by built-in thermal switches with automatic restart.Dynamically balanced turbine.


The fan is controlled with a 0-10 V external control signal, e.g. CDT E/0-10 speed controller for EC motors.The fan capacity is regulated by various parameters, including temperature level, pressure, smoke, etc.EC motor changes its rotation speed synchronously with the fluctuation of the control parameter to ensure the best suitable air flow.The fan is compatible both with 50 and 60 Hz power mains with no influence to the motor maximum speed.The parameters may be set and controlled due to data exchange between a PC and the fan.The fans can be integrated into a unified decentralized computerized network to adjust ventilation system with respect to specific user's demands.


Roof mounting directly above a ventilation shaft or an air duct.The fan is attached to a square air duct or to the MRDL/MRIDL mounting frame (see accessories).The counterflange FDL mounted on the fan bottom (see accessories) is designed for the fan connection to a round air duct.The KDL backdraft dampers (see Accessories) are designed to prevent air back drafting when the fan is off.The VDL flexible connectors (see Accessories) are designed to absorb vibration from the fan to the air duct.External terminal box for connection to power mains.

Parameter Tower-V EC 355 Measurement unit
Voltage 380-480 V
Phase 3 ˜
Frequency 50/60 Hz
Current 1.5 A
Power 0.94 W
Maximum air capacity 4500 m³/h
Sound pressure level at 3 m distance 51 dBА
RPM 2215 min-1
Max. operating temperature -25 +60 °С
EC motor yes -
Ingress protection rating IPX4 -
Casing material polymer coated steel -
Outdoor mounting yes -
Sound-insulated casing no -
Air duct for round air ducts -
Design centrifugal -
Type Exhaust -
Weight 38.0 kg
Mounting for roof -
Documents archieve
Documents archieve
Tower-V EC - data sheet (pdf 354.86Kb)
Tower-V EC - user manual (pdf 2.26Mb)
Tower-V EC - image (png 444.31Kb)

Type Dimensions [mm]
D H L L1 L2
Tower-V EC 355 438 387 595 450 708