Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy

Blauberg Vento Expert A50-1 S Pro


Heat recovery single-room units. Maximum air flow to 50 m³/h.
EAN codeEAN4058448023019
  • Description
  • Characteristics
  • Downloads
  • Designation key
  • Dimensions
  • Technical data
  • Accessories
Description
Description
Features
Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises. Reducing heat losses caused by ventilation due to heat recovery. Humidity balance and regulated air exchange create individually controlled microclimate.Coordinated network based on several integrated single-room ventilation units with central control.
Design

    
Easy maintenance. Indoor unit is opened by pressing the latches on both sides. One of the best regeneration efficiency on the market due to innovative hexagonal structure of the heat exchanger cells.
Integrated automatic air shutters prevent air back drafting. The specially designed front panel can be closed manually to ensure 100 % air tightness and protect against wind impact.
HEAT AND HUMIDITY REGENERATION
UNIT OPERATING LOGIC IN WINTER PERIOD
Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode. Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit switches to the extract air mode.
Control

Control of the unit operation mode is performed by means of sensor control panel located on the unit casing or a remote controller.
Vento Expert is equipped with a humidity sensor for indoor humidity control. If humidity increases above a set point, the unit boosts to the speed III.
Vento Expert either can operate as independent unit or can be connected with other units in a house and controlled with a master unit. In this case, only the master unit receives a signal from the remote control.

 

 

Mounting
The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building. The best ventilation solution is pairwise installation of reverse phase connected units. Some units ensure supply of fresh air to the room and the other units extract air from the premise. This way the most efficient balanced ventilation is arranged. In case of brand new construction, units are mounted in two stages:
  • Pre-installation at the stage of the indoor finishing and outer decorative wall finishing. It includes installation of an air duct, an outer ventilation hood and cable installation.
  • Final mounting before commissioning of a house. It includes installation of a regenerator with a fan and filters and mounting and wiring of an indoor unit with a controller and shutters.
Characteristics
Characteristics
Parameter Vento Expert A50-1 S Pro
(1 speed)
Vento Expert A50-1 S Pro
(2 speed)
Vento Expert A50-1 S Pro
(3 speed)
Measurement unit
Voltage 100-240 100-240 100-240 V
Frequency 50/60 50/60 50/60 Hz
Power 3.61 4.15 5.20 W
Current 0.025 0.03 0.039 A
RPM 800 1300 1900 min-1
Air flow in ventilation mode 15 30 50 m³/h
Air flow in ventilation mode 4 8 14 l/s
Air flow in heat recovery mode 8 15 25 m³/h
Air flow in heat recovery mode 2 4 7 l/s
SFP 1.73 1.00 0.75 W/l/s
Sound pressure level at 1 m in accordance with ISO 3741:2004 20 27 30 dBА
Sound pressure level at 3 m in accordance with ISO 3741:2004 11 18 21 dBА
Transported air temperature -20…+40 -20…+40 -20…+40 °С
Ingress protection rating IP24 IP24 IP24 -
Filter G3 (Option: F7 PM2,5 > 99 %*) G3 (Option: F7 PM2,5 > 99 %*) G3 (Option: F7 PM2,5 > 99 %*) -
EC motor yes yes yes -
Functions Filter replacement indication, Timer, Humidity sensor, External sensor connection Filter replacement indication, Timer, Humidity sensor, External sensor connection Filter replacement indication, Timer, Humidity sensor, External sensor connection -
Air duct 160 160 160 -
Outdoor sound pressure attenuation in accordance with DIN EN 20140 42 42 42 dBА
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 D1 D1 D1 -
Heat recovery efficiency in accordance with DIBt LÜ-A 20 up to 93 up to 93 up to 93 %
* Maximum air flow 40 m³/h Maximum air flow 40 m³/h Maximum air flow 40 m³/h -
Documents archieve
Documents archieve
Select a document type
  • Catalogues
  • Technical documentation
  • Certificates
Name
Vento Expert A50-1 Pro - user's manual (pdf 8.78Mb)
Vento Expert A50-1 S Pro - Energy Label (pdf 57.21Kb)
Vento Expert A50-1 S Pro - Specification (pdf 34.93Kb)
Vento Expert A50-1 S10 Pro - data sheet (pdf 2.39Mb)
Vento Expert A50-1 S10 Pro - image (png 288.2Kb)
Outer ventilation hood AH-S - installation instruction (pdf 1.02Mb)
Filters maintenance manual (pdf 3.04Mb)
Designation key
Designation key
Model Air duct Nominal air flow [m³/h] Front panel Ventilation hood type Control
Vento Expert A: round air duct 50 -1: flat front panel
S10: white plastic hood AH-10 white 160 (for standard walls)
S: metal hood for thin walls
Pro: control with touch buttons and a remote control
Dimensions
Dimensions

vent expert a50-1 s pro overall dimensions

Technical data
Technical data
Parameters Vento Expert A50-1 S Pro
Speed 1 2 3
Voltage [V / 50 (60) Hz] 100-240
Power [W] 3.61 4.15 5.20
Current [A] 0.025 0.030 0.039
RPM [min⁻1] 800 1300 1900
Air flow in ventilation mode [m3/h (l/s)] 15 (4) 30 (8) 50 (14)
Air flow in heat recovery mode [m3/h (l/s)] 8 (2) 15 (4) 25 (7)
SFP [W/l/s] 1.73 1.00 0.75
Filter G3 (Option: F7 PM2,5 > 99 %*)
Transported air temperature [°C] -20…+40
Sound pressure level at 1 m [dBA] 20 27 30
Sound pressure level at 3 m [dBA] 11 18 21
Outdoor sound pressure attenuation [dBA] in accordance with DIN EN 20140 42
Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8 S2
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 D1
Heat recovery efficiency according to DIBt LÜ-A 20 [%] up to 93
Ingress Protection Rating IP24
*maximum air flow 40 m3/h  
Accessories
Accessories
Name   Description
Pre-installation Kit Vento Expert A50-1 S10  
Pre-installation kit for mounting into a wall with standard thickness. Includes:
• Air duct
• AH 160 outer ventilation hood
• Plastic foam plug
• Plastic foam wedges
Pre-installation Kit Vento Expert A50-1 S  
Pre-installation kit for mounting into a thin wall. Includes:
• Air duct
• AH-S chrome 160 outer ventilation hood
• Plastic foam plug
• Plastic foam wedges
Completion Kit Vento Expert A50-1  
Final mounting kit. Includes:
• Cartridge with a heat regenerator, a fan and G3 filters
• Indoor unit with a controller and shutters
• Remote control
ZL1 Vento 160/150  
Cartridge with heat regenerator for cold climate
FP Vento Expert A50 G3

G3 filters (2 pcs.)

FP Vento Expert A50 F7
Includes:
• Plastic frame (1 pc.)
• G2 pre-filter (1 pc.)
• F7 filter (1 pc.). Filtration rate PM2.5 > 99 %
F7 filter reduces airflow of the unit down to 40 m³/h
АН-8 white 160  

White painted aluminium outer ventilation hood with frost protection for a cold climate

АН-8 chrome 160   Brushed stainless steel outer ventilation hood with frost protection for a cold climate
AH-10 *colour* 160

Plastic outer ventilation hood. Available in colours:

AH-10 chrome 160 Plastic outer ventilation hood with a plate with brushed stainless steel effect finish
AH-11 *colour* 160

Plastic outer ventilation hood. Available in colours: 

AH-S grey 160 Outer ventilation hood for thin wall, painted grey
AH-S chrome 160 Outer ventilation hood for thin wall made of brushed stainless steel
PP 160/0.5   Outer plastic ventilation hood for mounting from inside
KIT BlauPlast white 160 Kit for angular mounting with white color grille (for walls with standard thickness)
KIT BlauPlast chrome 160 Kit for angular mounting with stainless steel outer grille (for walls with standard thickness)
FB-Vento Expert   Remote control
CD-1   CO2 sensor with LED COindication and a sensor button for operation mode selection
CD-2   СОsensor