Blauberg VENTO Expert Duo A30-1 W
- Technical data
- Designation key
Please note that as of the end of the third quarter of 2020, in order to increase the efficiency of the Vento Expert Duo, the company manufactures products with regenerators divided into two sections.
Arrangement of balanced energy saving, supply and exhaust, single-room ventilation in kitchen, bathroom and utility room.Reducing heat losses caused by ventilation due to heat recovery.Humidity balance and regulated air exchange create individually controlled microclimate.Wi-Fi communication between several single-room ventilation units for coordinated operation.Controlled by Android or IOS smartphone or tablet.
|UNIT OPERATING LOGIC IN WINTER PERIOD|
To increase the efficiency of the Vento Expert Duo, the regenerator is divided into two parts, which are isolated from one another, thus eliminating the transfer of heat and moisture between them.One of the fans operates in the supply mode: fresh cold intake air from outside flows through the first regenerator, and absorbs accumulated heat and humidity.
At the same time, the other fan operates in the exhaust mode: warm stale air is extracted from the room to the outside, and while passing through the other regenerator, gradually heats it up and transfers some of the moisture.After 70 seconds operation the fans change the rotation direction and opposite processes start.
|Control of the unit operation mode is performed by means of smartphone, sensor control panel located on the unit casing or a remote controller.|
VENTO Expert DUO A30-1 W either can operate as independent unit, or can be connected with other units in a house to be controlled with a master unit. In this case, only the master unit receives a signal from the remote control. VENTO Expert DUO A30-1 W is equipped with a humidity sensor for indoor humidity control. If humidity will rise higher than set point, than the unit will boost to high speed independently from other units in the system.
The VENTO Expert DUO A30-1 W unit can be connected to a laptop for advanced settings:
|VENTO Expert A50-1 W units should be installed in the living room andbedrooms while VENTO Expert DUO A30-1 W should be installed inkitchen, bathrooms and utility room.||The unit is designed for through-the-wall installation inside a preparedhole in an outer wall of the building.|
|Parameter||VENTO Expert Duo A30-1 W (1 speed)||VENTO Expert Duo A30-1 W (2 speed)||VENTO Expert Duo A30-1 W (3 speed)||Measurement unit|
|Maximum air flow||10||20||30||m³/h|
|Maximum air flow||3||6||8||l/s|
|Air flow in heat recovery mode||60||60||60||m³/h|
|Air flow in heat recovery mode||16||16||16||l/s|
|Sound pressure level at 1 m||33||40||43||dBА|
|Sound pressure level at 3 m||24||31||34||dBА|
|Transported air temperature||-15...+50||-15...+50||-15...+50||°С|
|Ingress protection rating||IP24||IP24||IP24||-|
|Remote control panel||-||-||-||-|
|Functions||Wi-Fi, Filter replacement indication, Timer, Humidity sensor, External sensor connection||Wi-Fi, Filter replacement indication, Timer, Humidity sensor, External sensor connection||Wi-Fi, Filter replacement indication, Timer, Humidity sensor, External sensor connection||-|
|Regeneration efficiency in accordance with DIBt LÜ-A 20||≤ 85||≤ 85||≤ 85||%|
|Outdoor sound pressure attenuation in accordance with DIN EN 20140||42||42||42||dBА|
|Mounting||wall mounting||wall mounting||wall mounting||-|
|FP Vento Expert Duo A30 G3||
G3 filter kit (2 pcs.)
|FB VENTO Expert A50||Remote control|
|AH-5 white 160 DUO||Stainless steel ventilation hood, painted white|
|AH-5 chrome 160 DUO||Brushed stainless steel ventilation hood|
|AH chrome 160 DUO||Brushed stainless steel ventilation hood|
|AH white 160 DUO||Aluminum ventilation hood, painted white|
|PP 160/0.5||Outer ventilation hood for mounting from inside|
|CD-1||CO2 sensor with LED indication and on/off button|
|LST VENTO Expert DUO||Air stream separator|
|Model||Fans||Air duct||Nominal air flow [m³/h]||Unit modification||Control|
|Vento Expert||Duo: two fans||A: round air duct||30||1||W: wireless control|