Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy

Blauberg VENTO Solar V60 S Pro


Heat recovery single-room units. Maximum air capacity up to 58 m³/h.
EAN codeEAN4058448023088
  • Description
  • Characteristics
  • Downloads
  • Dimensions
  • Accessories
Description
Description
USE
Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Heat recovery minimises ventilation heat losses. Humidity balance and controllable air exchange create individually set microclimate.Coordinated network based on several integrated controlled single-room ventilation units.
DESIGN
The unit is operated by solar energy generated by the solar panel. Vento Solar is suitable for power-independent operation without connection to 230 V power supply. If the unit is connected to power mains it switches to 230 V power supply source in case of no solar light conditions or a full discharge of a storage battery. The VENTO Solar V60 Pro2 delivery set includes a storage battery with a charger. In the day time the solar panel is used for power supply to the unit and charging of a storage battery. In the night time the unit is powered by the storage battery. The integrated charger prevent overcharging and discharging of the storage battery.
vento solar v60 pro design
HEAT AND MOISTURE REGENERATION
High-tech ceramic energy accumulator with heat recovery  up to 88 %. Due to its cellular structure it has a larger contact area surface and high efficiency. The energy accumulator is featured with excellent heat-conducting properties and thermal energy storage capacity.
UNIT OPERATING LOGIC IN WINTER PERIOD
vento solar v60 pro work in winter
Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers a part of the accumulated heat and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode. Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit is switched to the extract air mode.
 CONTROL 
The control and power unit SEV-T12 consists of SEV control panel and AT-12 power transformer.The control and power unit SEV-T12 is able to operate unlimited number of ventilation units and has the following functions:
  •  Activation/Deactivation of the unit.
  •  Low and high speed changeover.
  •  Heat recovery or ventilation mode selection.

The power transformer AT-12 is able to supply power to up to four ventilation units from 230 V power mains. The control system includes a switching unit installed on the ventilation unit. It is used for selection of a power supply source, either a solar panel, a storage battery or 230 V power supply. 

vento solar v60 pro control
VENTO Solar V60 Pro / VENTO Solar V60 S Pro connection
  • In the day time the unit is powered by the solar panel.

vento solar v60 pro day time work

  • In the night time or in low light conditions the unit is powered by power  mains.

vento solar v60 pro night time work

VENTO Solar V60 Pro2 / VENTO Solar V60 S Pro2 connection
  • In the day time or when the storage battery is charged the unit is powered by the accumulated in the storage battery solar energy. 

vento solar v60 pro2 day time work

  • In the night time, in low light conditions or when the storage battery is discharged the unit is powered by power mains. 

vento solar v60 pro2 night time work

If several VENTO Solar Pro2 units integrated into a single system, each ventilation unit must be connected to its own solar panel and a storage battery.  
vento solar v60 pro2 several units connection
MOUNTING
The unit is designed for external through-the-wall installation inside a prepared square hole in the outer wall of the building. The best ventilation solution is pairwise installation of reverse phase connected units. Some units supply fresh air to the room and the other units extract stale air from the room. This allows to arrange the most efficient balanced ventilation. 
vento solar v60 pro mounting
Characteristics
Characteristics
Parameter VENTO Solar V60 S Pro (1 speed) VENTO Solar V60 S Pro (2 speed) Measurement unit
Voltage 12 12 V
Power 2.8 2.8 W
Current 0.018 0.018 A
RPM 1150 1150 min-1
Maximum air flow 35 35 m³/h
Sound pressure level at a distance of 1 m 34 34 dBА
Sound pressure level at 3 m 24 24 dBА
Outdoor sound pressure attenuation 19 19 dBА
Regeneration efficiency up to 88 up to 88 %
Ingress protection rating IP24 IP24 -
SEC class A+ A+ -
Mounting wall mounting wall mounting -
Documents archieve
Documents archieve
Select a document type
  • Catalogues
  • Technical documentation
  • Certificates
Name
VENTO Solar V60 Pro/Pro2 - data sheet (pdf 1.13Mb)
VENTO Solar V60 Pro/Pro2 - operation manual (pdf 4.01Mb)
VENTO Solar V60 S Pro - image (png 354.08Kb)
Outer ventilation hood with frost protection AH-8 - installation instruction (pdf 1.41Mb)
Dimensions
Dimensions

vento solar v60 pro dimensions

VENTO Solar V60 Pro

 

vento solar v60 pro solar panel dimensions

Solar panel

vento solar v60 pro power and control unit dimensions

Power and control unit

Accessories
Accessories
ACCESSORY NAME DESCRIPTION
control unit sev Control unit SEV  SEV is an external control unit for operation of the unit.
power transformer at-40  Power transformer AT-40 (230/12) AT-40 is a 40 W power transformer suitable for connection for max. 12 ventilation units. Used jointly with SEV control unit it ensures a central controllable ventilation system.
power transformer at-12 Power transformer AT-12 (230/12) AT-12 is a 12 W power transformer suitable for connection for max. 4 ventilation units. Used jointly with SEV control unit it ensures a central controllable ventilation system.