Blauberg Ceileo Compact

The casing is made of galvanized steel.The clip-on plastic grille ensures easy mounting and cleaning of the fan.The modular design of the grille enables easy retrofitting with the optional humidity or motion sensors.

Ceileo Compact Light fans are equipped with an energy-efficient LED light.

The built-in control panel of the Ceileo Compact T fans enables the following settings:

• turn-on delay by timer;
• turn-off delay by timer;
• humidity level;
• air flow for the operating modes 1 and 2.

MANUAL CONTROL

The fan is controlled by means of the CDP-2/10 speed switch (available as a specially ordered accessory).

AUTOMATIC CONTROL

	Timer: The fan is continuously running at mode 1. Upon the light switch closing, the fan goes to mode 2 after the turn-on delay timer countdown (from 0 to 3 minutes). Upon the light switch is turned off the built-in turn-off delay timer keeps the fan running in the mode 2 from 1 to 90 minutes. On elapsing of this period the fan reverts to the mode 1.
	Timer and humidity sensor (available as a specially ordered accessory): the fan runs continuously in the mode 1. If the indoor humidity level exceeds the sensor threshold value set in the 50-90 % range, the fan switches to the mode 2. When the humidity level reverts to the pre-set value, the built-in turn-off delay timer keeps the fan running in the mode 2 from 1 to 90 minutes. On elapsing of this period the fan reverts to the mode 1.
	Timer and motion sensor (available as a specially ordered accessory): the fan runs continuously in the mode 1. If the motion sensor detects movement within its operation zone, the fan goes to the mode 2. When the movement is no longer registered, the built-in turn-off delay timer keeps the fan running in the mode 2 from 1 to 90 minutes. On elapsing of this period the fan reverts to the mode 1.

Ceileo Compact T control panel

The fan is integrated into ceiling spaces.The fan is attached to the ceiling joists with mounting bracket and self-tapping screws.

The flexible air duct is attached to the fan exhaust spigot with a fixing clamp.Reduced casing height allows installing fans in ceilings with a thickness from 140 mm.