Blauberg Iso-Mix-E
Series of products
- Description
- Modifications
- Downloads
- Designation key
Description
Description
USE | |
The Iso-Mix-E fans combine the amazing versatility and outstanding performance of both axial and centrifugal fans. |
|
DESIGN | |
The casing is made of steel with a polymer coating. Conical impellers with specially profiled blades help boost angular velocity of the air flow resulting in higher pressure and air capacity compared to the conventional designs. The fan casing is equipped with an external water-tight terminal box for electrical connections. | |
MOTOR | SPEED CONTROL |
The fan motor shaft is mated to an impeller with diagonal blades. The units are equipped with single-speed 4-pole single-phase or threephase motors. The motors have thermal contacts built into the coils for overheating protection. | Infinitely variable or stepped speed regulation is provided by means of athyristor or autotransformer controller. Several fans may share the same controller provided that the combined power output and operating current are within the controller ratings. |
MOUNTING | |
The fans can be installed at the inlet or outlet of the ductwork or in the middle. The ducts can be fitted at any angle relative to the fan axis. A single system may have several fans installed in parallel to boost the output capacity or in series to boost the working pressure. |
Modifications
Modification name |
---|
Iso-Mix-E 355-4D |
Iso-Mix-E 355-4E |
Iso-Mix-E 400-4D |
Iso-Mix-E 400-4E |
Iso-Mix-E 450-4D |
Iso-Mix-E 450-4E |
Modification name | |
---|---|
Iso-Mix-E 355-4D | |
Iso-Mix-E 355-4E | |
Iso-Mix-E 400-4D | |
Iso-Mix-E 400-4E | |
Iso-Mix-E 450-4D | |
Iso-Mix-E 450-4E |
|
|
|
|
|
|
Documents archieve
Documents archieve
Select a document type
Designation key
Designation key
Series | Spigot diameter [mm] | Моtor | ||
Number of poles | Phase | |||
Iso-Mix-E | 355; 400; 450 | - | 4 | E: single-phase D: three-phase |