Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

privacy-policy

Blauberg Smart WiFi / Smart IR WiFi

Smart WiFi / Smart IR WiFi
Smart WiFi / Smart IR WiFi
zoom

Smart exhaust fans with stylish design for enhanced comfort in bathrooms, shower rooms, kitchens and Wi-Fi control from a smartphone. Maximum air capacity - 133 m³/h.
Model features
  • Description
  • Modifications
  • Capacity diagram
  • Downloads
  • Designation key
Description
Description

Smart exhaust fans with stylish design forenhanced comfort in bathrooms, shower rooms,kitchens and Wi-Fi control from a smartphone.

FEATURES

Intelligent electronics and integrated functions for the ideal microclimate.High air flow up to 133 m3/h and silent operation due to a specially designed motor and aerodynamic profiled impeller.High-efficient DC motor with low energy demand and reliable non-stop operation rated for above 50 000 hours.Impulse-type power supply unit with a wide power supply range from 100 to 240 V, 50/60 Hz provides stable operation in electrical grids with versatile power supply standards.Replaceable connecting piece for connection to Ø 100 or 125 mm air ducts.

The fan has automatic power shutoff function in case of the motor jam.Low noise level due to specially designed fixation of the motor and the impeller on a vibration absorbing mount.The built-in slide switch makes it easy to disconnect the fan from power mains for safe operation.Ultrathin casing with 28 mm thickness.Versatile mounting – vertical or horizontal installation. Easy detachable motor and impeller block requires no tools and provides comfortable servicing.

MODES AND FUNCTION
The operating mode for the Smart WiFi fan can be selected using an application for Android or iOS.

 

INTELLIGENT HUMIDITY SENSOR

The fan has an integrated intelligent humidity sensor with the following operation modes:

Manual mode allows setting the humidity threshold in range from 40 % to 80 %. If this threshold is exceeded, the fan turns on or switches to higher speed.

Auto – intelligent humidity control. This mode provides for humidity threshold change and fan speed selection in automatic mode. The fan independently selects the optimum humidity threshold for the room in which it is installed. Fan operation algorithm is selected based on analysing the statistical data of indoor humidity level.

AUTOMATIC OPERATION BASED ON TEMPERATURE SENSOR

If the air temperature exceeds the set point, the fan will switch to Max speed and will return to the previous mode only after indoor temperature drops by 4 °C below the set point.

SMOOTH SPEED CONTROL

The fan has an integrated smooth speed control function for each mode:

  • Silent mode. The fan runs at Silent speed. The speed can be adjusted in the range from 30 % to 100 % of the fan maximum performance.
  • Max (Boost Mode). The fan runs at Max speed. The speed can be adjusted in the range from 30 % to 100 % of the fan maximum performance.
MOTION SENSOR (FOR SMART IR WIFI)

When the motion sensor is activated the turn-on delay timer is switched on. Then the fan will switch to Silent speed. Once there is no motion detected, and after turn-off delay time the fan will switch to standby mode.

TIMER

The fan is equipped with two various timer types to provide maximal comfort:

  • Turn-on delay timer allows to delay switching to a higher speed by 2 or 5 minutes after sensor activation.
  • Turn-off delay timer is designed to prolong the fan operation for 5, 15, 30 or 60 minutes in the mode caused by sensor activation or Boost mode activation.
24 HOURS

Silent – permanent low-speed operation mode. If the humidity changes, the fan switches to a higher speed (Max mode). The fan is switched to Silent mode after signal from the motion sensor or external switch.

Do not disturb – the function is only available when the 24 hours mode is activated. This function allows for setting the time interval so that the fan will not respond to sensors or switch actuation, and will operate at minimum speed (Silent).

INTERVAL VENTILATION

Automatic interval ventilation (function is only available when the 24 hours mode is deactivated). This mode allows ventilating the room every 12 hours for 30 minutes at the set speed.

 

 

Modifications
Modification name
Smart IR WiFi
Smart WiFi
+
+
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
Name
Smart WiFi / Smart IR WiFi - data sheet (pdf 1.47Mb)
Smart WiFi / Smart IR WiFi - user manual (pdf 5.58Mb)
Smart WiFi / Smart IR WiFi - image (png 503.11Kb)
Designation key
Designation key
Smart WiFi IR Savanna
Model Integrated Wi-Fi module Option Colour