Blauberg Vento Eco A30-4 S11 Pro
- Description
- Modifications
- Downloads
- Designation key
- Accessories
- Technical data
FEATURES | |||
Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Protection from outdoor noise.Reducing heat losses caused by ventilation due to heat recovery.Humidity balance and regulated air exchange create individually controlled microclimate. |
|||
DESIGN | |||
|
|||
HEAT AND HUMIDITY REGENERATION | |||
UNIT OPERATING LOGIC IN WINTER PERIOD |
|||
Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode. |
Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit switches to the extract air mode. |
||
CONTROL | |||
Control of the unit operation mode is performed by means of the sensor control panel. |
One control panel with sensor buttons can control up to two units.Low voltage (12 V) power supply between control panel and Vento Eco units. |
||
MOUNTING | |||
The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.One unit is able to ventilate a room up to 15 m². For bigger rooms two or more units must be installed. |
The best ventilation solution is pairwise installation of reverse phase synchronized units. One unit ensures supply of fresh air to the room and the other one extracts air from the premise. This way the most efficient balanced ventilation is arranged. |
||
Modification name |
---|
Vento Eco A30-4 S Pro |
Vento Eco A30-4 S11 Pro |
Modification name | |
---|---|
Vento Eco A30-4 S Pro | |
Vento Eco A30-4 S11 Pro |
|
|
Model | Air duct | Rated air flow [m³/h] | Internal grille type | Ventilation hood type | Control |
Vento Eco | A: round air duct | 30 | 4 |
S11:plastic hood for standard walls |
Pro: sensor control panel |
Name | Description | |
Completion Kit Vento Eco A30-4 |
Indoor grille and cartridge with heat regenerator, fan and G3 filters |
|
ZL1 Vento 100 |
Cartridge with heat regenerator for cold climate |
|
FP2 Vento G3 | G3 filters (2 pcs.) | |
AH-8 white 100 | White painted aluminium outer ventilation hood with frost protection for a cold climate | |
AH-8 chrome 100 | Brushed stainless steel outer ventilation hood with frost protection for a cold climate | |
AH-10 *colour* 100 | Plastic outer ventilation hood. Available in colours: |
|
AH-10 chrome 100 | Plastic outer ventilation hood with a plate with brushed stainless steel effect finish | |
AH-11 *colour* 100 | Plastic outer ventilation hood. Available in colours: |
|
AH-S chrome 100 | Outer ventilation hood for thin wall made of brushed stainless steel | |
AH-S white 100 | Outer ventilation hood for thin wall made of stainless steel, painted white | |
KIT BlauPlast white 100 | Kit for angular mounting with white color grille (for walls with standard thickness) | |
KIT BlauPlast chrome 100 | Kit for angular mounting with stainless steel outer grille (for walls with standard thickness) | |
BlauPlast RTR 100/0.35-0.5 | Telescopic air duct with the diameter of 100 mm and adjustable length from 350 to 500 mm | |
BlauPlast RTR 100/0.5-1 | Telescopic air duct with the diameter of 100 mm and adjustable length from 500 to 1000 mm | |
SE Vento Eco A30 Pro | Sensor control panel |
|