Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy

Blauberg Sileo Design DC 100 H


High-performance low noise extract fans with energy-efficient DC motors. Maximum air capacity up to 93 m³/h.
img_code EAN 4058448054839
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Options
Description
Description
FEATURES


The casing and the impeller are made of high-quality and durable UV-resistant plastic.
The specially designed aerodynamic profile of the mixed-flow impeller provides high air flow and pressure combined with low-noise operation.A shortened spigot for mounting into a ventilation shaft or direct connection to Ø 100 mm air duct.The fan is equipped with a specially designed backdraft damper to prevent back flow and heat losses during the fan standby.The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulance, noise level and boost air pressure.High ingress protection rating makes the fan the ideal solution for ventilation of a bathroom.The electronic components are protected with tight covers. Turn-off delay timer. Adjustable delay from 2 up to 30 min.

OPTIONS OPERATING MODE


Model Sileo Design DC 100
Option H
Turn-off delay timer
Humidity sensor

Humidity sensor

  • Humidity setpoint adjustable from 60 % up to 90 %.
Operation mode selection and setup for Sileo Design DC 100 models with modifications T, H is performed by setting the DIP switch to a respective position.
MODE 1 (SINGLE-SPEED MODE)

The fan is turned off by default. The fan starts operating at the low speed when the switch is closed or the sensor is activated.

MODE 2 (SINGLE-SPEED MODE)

The fan is turned off by default. The fan starts operating at the high speed when the switch is closed or the sensor is activated.

MODE 3 (TWO-SPEED MODE)

The fan operates at the low speed by default. The fan switches to the high speed when the switch is closed or the sensor is activated.

MODE 4 (TWO-SPEED MODE)

The fan is turned off by default. The fan starts operating at the low speed when the switch is closed and switches to the high speed when the humidity sensor is activated.
MOUNTING MOTOR
Direct installation into a ventilation shaft.Flexible air ducts may be used in case of remote location of the ventilation shaft. The air duct is connected to the exhaust spigot with a fixing clamp. Wall mounting with screws.Suitable for ceiling mounting.  Low energy demand up to 2.7 W due to a new high-efficient DC motor.Maintenance-free bearings contain enough grease for 40 000 hrs non-stop operation.Motor equipped with electric overheating protection.
Characteristics
Characteristics
Parameter Sileo Design DC 100 H
min
Sileo Design DC 100 H
max
Measurement unit
* Sound pressure level measured in free space at a distance of 3 meters from the fan Sound pressure level measured in free space at a distance of 3 meters from the fan -
Maximum air flow 58 93 m³/h
Maximum air flow 16 26 l/s
Casing material plastic plastic -
Mounting ceiling mounting , wall mounting ceiling mounting , wall mounting -
Sound pressure level 21 26 dBА
SFP 0.09 0.1 W/l/s
RPM 1850 2650 min-1
Current 0.026 0.04 A
Frequency 50/60 50/60 Hz
Power 1.5 2.7 W
Voltage 220-240 220-240 V
Type Exhaust Exhaust -
Connection diameter 100 100 mm
Design axial axial -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
Name
Sileo (Design) DC - user's manual (pdf 4.39Mb)
Sileo Design DC - data sheet (pdf 483.31Kb)
Sileo Design DC - images (png 389.91Kb)
Modifications
Modifications
Modification name Timer Humidity sensor
Sileo Design DC 100 H
+
Accessories