Blauberg Sileo Design DC 100

Print version

High-performance low noise extract fans with energy-efficient DC motors. Maximum air capacity up to 93 m³/h.

EAN4058448098468

Add to project

To comparison

Description
Characteristics
Capacity diagram
Downloads
Modifications
Designation key
Dimensions

Description

FEATURES

The casing and the impeller are made of high-quality and durable UV-resistant plastic.
The specially designed aerodynamic profile of the mixed-flow impeller provides high air flow and pressure combined with low-noise operation.A shortened spigot for mounting into a ventilation shaft or direct connection to Ø 100 mm air duct.The fan is equipped with a specially designed backdraft damper to prevent back flow and heat losses during the fan standby.The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulance, noise level and boost air pressure.High ingress protection rating makes the fan the ideal solution for ventilation of a bathroom.The electronic components are protected with tight covers. Turn-off delay timer. Adjustable delay from 2 up to 30 min.

OPTIONS

OPERATING MODE

Model	Sileo Design DC 100
Option	H
Turn-off delay timer	•
Humidity sensor	•

Humidity sensor

Humidity setpoint adjustable from 60 % up to 90 %.

Operation mode selection and setup for Sileo Design DC 100 models with modifications T, H is performed by setting the DIP switch to a respective position.
MODE 1 (SINGLE-SPEED MODE)

The fan is turned off by default. The fan starts operating at the low speed when the switch is closed or the sensor is activated.

MODE 2 (SINGLE-SPEED MODE)

The fan is turned off by default. The fan starts operating at the high speed when the switch is closed or the sensor is activated.

MODE 3 (TWO-SPEED MODE)

The fan operates at the low speed by default. The fan switches to the high speed when the switch is closed or the sensor is activated.

MODE 4 (TWO-SPEED MODE)

The fan is turned off by default. The fan starts operating at the low speed when the switch is closed and switches to the high speed when the humidity sensor is activated.

MOUNTING

MOTOR

Direct installation into a ventilation shaft.Flexible air ducts may be used in case of remote location of the ventilation shaft. The air duct is connected to the exhaust spigot with a fixing clamp. Wall mounting with screws.Suitable for ceiling mounting.

Low energy demand up to 2.7 W due to a new high-efficient DC motor.Maintenance-free bearings contain enough grease for 40 000 hrs non-stop operation.Motor equipped with electric overheating protection.

Characteristics

Parameter	Sileo Design DC 100 min	Sileo Design DC 100 max	Sileo Design DC 100 T min	Sileo Design DC 100 T max	Sileo Design DC 100 H min	Sileo Design DC 100 H max	Measurement unit
Voltage	220-240	220-240	220-240	220-240	220-240	220-240	V
Frequency	50/60	50/60	50/60	50/60	50/60	50/60	Hz
Power	1.5	2.7	1.5	2.7	1.5	2.7	W
Current	0.026	0.04	0.026	0.04	0.026	0.04	A
RPM	1850	2650	1850	2650	1850	2650	min^-1
Maximum air flow	58	93	58	93	58	93	m³/h
Maximum air flow	16	26	16	26	16	26	l/s
Sound pressure level	21	26	21	26	21	26	dBА
SFP	0.09	0.1	0.09	0.1	0.09	0.1	W/l/s
Casing material	plastic	plastic	plastic	plastic	plastic	plastic	-
Connection diameter	100	100	100	100	100	100	mm
Design	axial	axial	axial	axial	axial	axial	-
Type	Exhaust	Exhaust	Exhaust	Exhaust	Exhaust	Exhaust	-
Mounting	ceiling mounting, wall mounting	ceiling mounting, wall mounting	ceiling mounting, wall mounting	ceiling mounting, wall mounting	ceiling mounting, wall mounting	ceiling mounting, wall mounting	-
*	Sound pressure level measured in free space at a distance of 3 meters from the fan	Sound pressure level measured in free space at a distance of 3 meters from the fan	Sound pressure level measured in free space at a distance of 3 meters from the fan	Sound pressure level measured in free space at a distance of 3 meters from the fan	Sound pressure level measured in free space at a distance of 3 meters from the fan	Sound pressure level measured in free space at a distance of 3 meters from the fan	-