Wall vent BLAUBERG Fresher 50 | BLAUBERG Ventilatoren

Description
Characteristics
Downloads
Dimensions
Designation key
Ecodesign parameters
Accessories

Description

FEATURES

Efficient energy saving supply ventilation in flats, houses, cottages, social and commercial spaces. Coarse and fine filters ensure fresh filtered air supply to premises. Various operation modes and regulated air exchange create individually controlled microclimate. Organization of the air supply system with centralized control based on several ventilation units.

DESIGN

The ventilator consists of a cartridge with filters, an air duct with sound absorbing material, an indoor unit with a decorative front panel and an outer ventilation hood. The cartridge consists of an energy efficient EC fan and filters that ensure coarse and fine filtration of supply air. The indoor unit is in the basic version equipped with automatic shutters that close during the

ventilator standstill and prevent air backdraft. The outer ventilation hood is used to prevent direct ingress of water and other objects to the ventilator. A remote control, an extended air duct (700 mm) and different external grilles are optionally available for the Fresher 50 units.


Easy maintenance. The indoor unit can be opened applying a light pressure from both sides	The built-in automatic air shutters prevent back air draft	One of the highest air cleaning efficiency ratings on the market through the use of a modern filter system	The specially designed front panel provides 100 % tightness and wind protection

CONTROL

The ventilator can be operated with the sensor control panel on the unit casing or with the remote control (FB Fresher 50).

The ventilator design enables connecting any external controls, such as a humidity sensor, an external CO₂ sensor or a switch. Connection of several ventilators in series provides effective, optimal ventilation. The first unit

in series becomes the master unit Ventilation mode is controlled via the control panel on the master unit. The signal from the remote control is received by the first ventilator (master) only.

MOUNTING

The unit is designed for through-the-wall mounting into a round hole provided in the outer wall. The unit installation in new-construction buildings is carried out in two phases: 1. Preassembly at the stage of interior and exterior finishing of walls (installing the air duct and the outer ventilation hood, electrical cable laying).

2. Final assembly - before commissioning the house. It includes installation of the cartridge with the fan and filters as well as installation and connection of the indoor unit with the controller and air shutters.

Characteristics

Parameter	FRESHER 50 (1 SPEED)	FRESHER 50 (2 SPEED)	FRESHER 50 (3 SPEED)	Measurement unit
Speed	I	II	III	-
Voltage	100-240	100-240	100-240	V
Phase	1	1	1	˜
Frequency	50/60	50/60	50/60	Hz
Power	3.8	4.7	7.4	W
Current	0.031	0.039	0.061	A
Maximum air flow	20	35	50	m³/h
Maximum air flow	6	10	14	l/s
Sound pressure level at a distance of 1 m	22*	29*	32*	dBА
Sound pressure level at 3 m	13*	20*	23*	dBА
SFP	0.68	0.48	0.53	W/l/s
Outdoor sound pressure attenuation	41	41	41	dBА
Filter	F8+G3	F8+G3	F8+G3	-
Transported air temperature	-30...+50	-30 +50	-30 +50	°С
Ingress protection rating	IP24	IP24	IP24	-
Type	Supply	Supply	Supply	-
PM 2.5 removal efficiency	98	98	98	%
Mounting	wall mounting	wall mounting	wall mounting	-
*	Sound pressure level measured in free space	Sound pressure level measured in free space	Sound pressure level measured in free space	-

Documents archieve

Dimensions

Designation key

Fresher	50	_: 500 L: 700	_: air shutters M: no air shutters	_: ventilation hood by default 1: outer grille Decor 150s St white 2: outer grille Decor 185x185/150s S: Brushed stainless steel ventilation hood AH-S chrome 160 (for thin walls) S white: Brushed stainless steel ventilation hood painted white AH-S chrome 160 (for thin walls) S10 chrome: plastic ventilation hood AH-10 chrome 160 S10: plastic ventilation hood AH-10 white 160	_: without remote control FB: with remote control
Model	Nominal air flow [m³/h]	Air duct length [mm]	Air shutters	External grille type option	Option

Ecodesign parameters

Trade mark	BLAUBERG
Model	Fresher 50
Specific energy consumption (SEC) [kWh(m²a)]	Cold		Average		Warm
	-53.2	А+	-26.1	B	-10.6	Е
Type of ventilation unit	Unidirectional
Type of drive installed	Multi-speed
Type of heat recovery system	No
Thermal efficiency of heat recovery [%]	n/a
Maximum air flow [m³/h]	50
Power [W]	6.6
Sound power level [dBA]	40
Reference flow rate [m³/s]	0.01
Reference pressure difference [Pa]	n/a
Specific power input (SPI) [W/m³/h]	0.134
Control typology	Local demand control
Maximum internal leakage rates [%]	n/a
Maximum external leakage rates [%]	2.7
Internet address	http://www.blaubergventilatoren.de/
The annual electricity consumption (AEC)[kWh electricity/a]	Cold		Average		Warm
	88		88		88
The annual heating saved (AHS)[kWh primary energy/a]	Cold		Average		Warm
	5536		2830		1280

Accessories

Accessory name		Description
FP Fresher 50 F8		Filter kit: G3 filter (1 pc) + F8 filter (1 pc)
FB Fresher 50		Remote control
CD-1		CO₂ sensor with LED indication and on/off button
CD-2		CO₂ sensor
HR-S		Room humidistat

Blauberg Fresher 50