Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy

Blauberg Hybrid Max


Decentralized unit for the small offices, facilities, classrooms and living spaces. Maximum air flow up to 160 m³/h.
EAN codeEAN
  • Description
  • Characteristics
  • Downloads
  • Automation functions
  • Dimensions
  • Product range
  • Accessories
Description
Description
FEATURES  

Efficient decentralized ventilation unit for small offices or conference rooms.Visible ceiling suspended installation.A version with electrical preheater is available for cold climate.Clean air due to the use of an F7 filter for supply air filtration.

Possibility to connect fresh air inlet and exhaust air ducts at top or back side of the unit.
Low noise operation from 16 dB(A) at 3m.High level of comfort due to builtin bypass and air dampers.

DESIGN  
AIR DISTRIBUTION
CASING BYPASS

The casing is made of galvanized sheet metal with white painted decorative cover. The contemporary design of the Hybrid Max unit will seamlessly blend into any interior.The unit is heat- and sound-insulated with a 20 mm layer of foam. The service panel is easy to open for filter maintenance. The unit is equipped with two Ø125 mm spigots for fresh air intake and stale air exhaust. The position of the spigots can be changed from horizontal to vertical.

The Hybrid Max units are equipped with a bypass for ventilation (air cooling by the cool air from outside).

PREHEATING

The Hybrid Max E S21 units are equipped with an electrical preheater to prevent heat exchanger freezing in the cold climate.

AIR DAMPERS HEAT RECOVERY

The Hybrid Max unit is equipped with two automatic air dampers, which close automatically when the unit is off to prevent drafts.

The Hybrid Max unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger.

The Hybrid Max E unit is equipped with an enthalpy plate counter-flow heat exchanger for energy (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger.


The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively.In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.

FANS

The units feature high-performance, electronically commutated (EC), external rotor motors with forward curved blades. These state-of-the-art units offer excellent energy efficiency. In addition to that, EC motors combine high performance and optimum control over the entire speed range. EC motors have an excellent power efficiency (up to 90 %).

CONTROL AND AUTOMATION

The Hybrid Max S21 units are equipped with an integrated automation system. The remote control panel is not included in the delivery set (sold separately).The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System).Unit control via Wi-Fi using the mobile application Blauberg AHU.

Download the Blauberg AHU app for Android Download the Blauberg AHU app for iOS

The Hybrid Max S14 units are equipped with an integrated automation system and the S14 wall mounted sensor control panel with LED-indication.

MOUNTING  
Characteristics
Characteristics
Parameter 1 Speed 2 Speed 3 Speed Measurement unit
Voltage 230 230 230 V
Phase 1 1 1 ˜
Frequency 50/60 50/60 50/60 Hz
Integrated electric preheater power - - - W
Max. unit current with electric heater - - - A
Max. unit current without electric heater 0.5 0.5 0.5 A
RPM 2800 2800 2800 min-1
Max. unit power without an electric heater 58 58 58 W
Maximum air flow 60 90 160 m³/h
Sound pressure level LpA to environment at 1 m distance 25 35 42 dBА
Operating temperature –25…+40 –25…+40 –25…+40 -
Sound pressure level LpA to environment at 3 m distance 16 26 32 dBА
Insulation 20 20 20 mm
Extract filter Coarse 90% / G4 Coarse 90% / G4 Coarse 90% / G4 -
Supply filter ePM1 70% / F7 (G4 option) ePM1 70% / F7 (G4 option) ePM1 70% / F7 (G4 option) -
Heat recovery efficiency 84-95 84-95 84-95 %
Humidity recovery efficiency - - - %
Bypass yes yes yes -
Heat exchanger type counter-flow counter-flow counter-flow -
Heat exchanger material polystyrene polystyrene polystyrene -
Connected air duct diameter 125 125 125 mm
Weight 47 47 47 kg
Casing material aluzinc aluzinc aluzinc -
Type Supply and exhaust Supply and exhaust Supply and exhaust -
SEC class A+ A+ A+ -
Mounting ceiling mounting, wall mounting ceiling mounting, wall mounting ceiling mounting, wall mounting -
Documents archieve
Documents archieve
Select a document type
  • Catalogues
  • Technical documentation
  • Certificates
Name
Hybrid Max - data sheet (pdf 1.53Mb)
Hybrid Max - image (png 203.91Kb)
Hybrid - user's manual (pdf 3.14Mb)
Automation functions
Automation functions
Functions Hybrid Max S21 Hybrid Max S14
Unit control via Wi-Fi using a mobile application +
Unit control via a wired remote control panel
S22 control panel (option)
S14 control panel
Unit control via a wireless remote control panel
S22 Wi-Fi control panel (option)
Unit control via a remote wired LCD control panel
S25 control panel (option)
BMS (Building Management System) RS-485
Wi-Fi
Ethernet
MODBUS (RTU, TCP)
Blauberg Cloud Server service +
Speed selection + +
Filter replacement indication by filter timer by filter timer
by filter clogging differential pressure switch LED indication about alarms
Alarm indication full alarm description in the mobile application
Week-scheduled operation +
Bypass automatic manual
manual
Timer +
Boost mode +
Fireplace mode + using cyclical stops of the supply fan
Freeze protection through cyclic stops of the supply fan
through preheating (option)
Reheater connection option
Cooler connection option
Minimum supply air temperature control + option
Humidity control option option
CO2 control option
VOC control option
PM2.5 control option option
Fire alarm sensor connection option
Dimensions
Dimensions

Product range
Product range
  Heat exchanger Air dampers Preheater Bypass
Hybrid Max S14 HRV  
Hybrid Max S21  
Hybrid Max E S21
 Hybrid Max ERV S14 ERV  
Hybrid Max ERV S21  
Hybrid Max E ERV S21
Accessories
Accessories
    Hybrid Max S14
Hybrid Max ERV S14
Hybrid Max S21
Hybrid Max E S21
Hybrid Max ERV S21
Hybrid Max E ERV S21
G4 panel filter FP 233x175x22 G4 FP 233x175x22 G4 FP 233x175x22 G4
F7 panel filter FP 233x175x22 F7 FP 233x175x22 F7 FP 233x175x22 F7
Control panel - S22 S22
 Wireless control panel - S22 Wi-Fi S22 Wi-Fi
LCD control panel  - S25 S25
Humidity sensor  FS2 FS2 FS2
Humidity sensor  HR-S HR-S HR-S
CO₂ sensor  CD-2 CD-2 CD-2
CO₂ sensor with indication  CD-1 CD-1 CD-1
VOC sensor - DPWQ30600 DPWQ30600
CO₂ sensor - DPWQ40200 DPWQ40200
Humidity sensor - DPWC11200 DPWC11200
Outer grille VDA 125 CFn Al VDA 125 CFn Al VDA 125 CFn Al