Blauberg Hybrid Max E ERV

Print version

Decentralized unit for the small offices, facilities, classrooms and living spaces. Maximum air flow up to 160 m³/h.

EAN

Add to project

To comparison

Description
Characteristics
Capacity diagram
Downloads
Automation functions
Dimensions
Sound power level
Energy labeling
Product range
Accessories

Description

FEATURES

Efficient decentralized ventilation unit for small offices or conference rooms.Visible ceiling suspended installation.A version with electrical preheater is available for cold climate.Clean air due to the use of an ePM1 70% / F7 filter for supply air filtration.

Possibility to connect fresh air inlet and exhaust air ducts at top or back side of the unit.
Low noise operation from 16 dB(A) at 3m.High level of comfort due to builtin bypass and air dampers.

DESIGN

AIR DISTRIBUTION

CASING

BYPASS

The casing is made of galvanized sheet metal with white painted decorative cover. The contemporary design of the Hybrid Max unit will seamlessly blend into any interior.The unit is heat- and sound-insulated with a 20 mm layer of foam. The service panel is easy to open for filter maintenance. The unit is equipped with two Ø125 mm spigots for fresh air intake and stale air exhaust. The position of the spigots can be changed from horizontal to vertical.

The Hybrid Max units are equipped with a bypass for ventilation (air cooling by the cool air from outside).

PREHEATING

The Hybrid Max E S21 units are equipped with an electrical preheater to prevent heat exchanger freezing in the cold climate.

AIR DAMPERS

HEAT RECOVERY

The Hybrid Max unit is equipped with two automatic air dampers, which close automatically when the unit is off to prevent drafts.

The Hybrid Max unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger.
The Hybrid Max E unit is equipped with an enthalpy plate counter-flow heat exchanger for energy (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger.

The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively.In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.

FANS

The units feature high-performance, electronically commutated (EC), external rotor motors with forward curved blades. These state-of-the-art units offer excellent energy efficiency. In addition to that, EC motors combine high performance and optimum control over the entire speed range. EC motors have an excellent power efficiency (up to 90 %).

CONTROL AND AUTOMATION

The Hybrid Max S21 units are equipped with an integrated automation system. The remote control panel is not included in the delivery set (sold separately).The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System).Unit control via Wi-Fi using the mobile application Blauberg AHU.


Download the Blauberg Home app for Android	Download the Blauberg Home app for iOS

The Hybrid Max S14 units are equipped with an integrated automation system and the S14 wall mounted sensor control panel with LED-indication.

MOUNTING

Characteristics

Parameter	1 Speed	2 Speed	3 Speed	Measurement unit
Voltage	230	230	230	V
Phase	1	1	1	˜
Frequency	50/60	50/60	50/60	Hz
Integrated electric preheater power	800	800	800	W
Max. unit current with electric heater	4	4	4	A
Max. unit current without electric heater	0.5	0.5	0.5	A
RPM	2800	2800	2800	min^-1
Max. unit power without an electric heater	58	58	58	W
Maximum air flow	60	90	160	m³/h
Sound pressure level LpA to environment at 1 m distance	25	35	42	dBА
Operating temperature	–25…+40	–25…+40	–25…+40	-
Sound pressure level LpA to environment at 3 m distance	16	26	32	dBА
Insulation	20	20	20	mm
Extract filter	Coarse 90% / G4	Coarse 90% / G4	Coarse 90% / G4	-
Supply filter	ePM1 70% / F7 (G4 option)	ePM1 70% / F7 (G4 option)	ePM1 70% / F7 (G4 option)	-
Heat recovery efficiency	74-89	74-89	74-89	%
Humidity recovery efficiency	47-60	47-60	47-60	%
Bypass	yes	yes	yes	-
Heat exchanger type	counter-flow	counter-flow	counter-flow	-
Heat exchanger material	enthalpy	enthalpy	enthalpy	-
Connected air duct diameter	125	125	125	mm
Weight	47	47	47	kg
Casing material	aluzinc	aluzinc	aluzinc	-
Type	Supply and exhaust	Supply and exhaust	Supply and exhaust	-
SEC class	A	A	A	-
Mounting	ceiling mounting, wall mounting	ceiling mounting, wall mounting	ceiling mounting, wall mounting	-

Capacity diagram

Selection method:
Air capacity:
Pressure:

Operating point

Air capacity: --
Pressure: ---

Documents archieve

Automation functions

Functions

Hybrid Max S21

Hybrid Max S14

Unit control via Wi-Fi using a mobile application

–

Unit control via a wired remote control panel

S22 control panel (option)

S14 control panel

Unit control via a wireless remote control panel

S22 Wi-Fi control panel (option)

–

Unit control via a remote wired LCD control panel

S25 control panel (option)

–

BMS (Building Management System)

RS-485

–

Wi-Fi

–

Ethernet

–

MODBUS (RTU, TCP)

–

Speed selection

Filter replacement indication

by filter timer

Alarm indication

full alarm description in the mobile application

–

Week-scheduled operation

–

Bypass

automatic

manual

–

Timer

–

Boost mode

–

Fireplace mode

–

Freeze protection

through cyclic stops of the supply fan

through preheating (option)

–

Reheater connection

option

–

Cooler connection

option

–

Minimum supply air temperature control

option

–

Humidity control

option

CO₂ control

option

VOC control

option

PM2.5 control

option

Fire alarm sensor connection

option

–

Dimensions

Sound power level

Sound power level, A-weighted	Total	Octave frequency bands [Hz]									LpA 3 m	LpA 1 m
Sound power level, A-weighted	Total	200	250	315	400	500	630	800	1000	1250	LpA 3 m	LpA 1 m
L_wA to environment at 160 m³/h	53	37	41	41	45	49	40	42	41	38	32	42
L_wA to environment at 90 m³/h	46	31	37	43	36	35	33	34	33	30	26	35
L_wA to environment at 60 m³/h	36	32	25	24	25	24	23	23	21	19	16	25

Sound power level, A-weighted	Total	Octave frequency bands [Hz]									LpA 3 m	LpA 1 m
Sound power level, A-weighted	Total	1600	2000	2500	3150	4000	5000	6300	8000	10000	LpA 3 m	LpA 1 m
L_wA to environment at 160 m³/h	53	37	37	35	31	27	23	21	24	25	32	42
L_wA to environment at 90 m³/h	46	29	29	27	24	21	19	19	23	24	26	35
L_wA to environment at 60 m³/h	36	18	18	19	17	17	18	19	23	24	16	25

Energy labeling

Supplier model identifier and options installed	Hybrid Max (E) ERV
Reference climate	Cold/Average/Warm
SEC in [kWh/(m²a)] for each type of climate	-76.9/-40.2/-16.5
SEC Class	A
Declared typology	BVU
Type of drive installed	Variable speed
Type of heat recovery	Recuperative
Thermal efficiency*	78
Maximum flow rate in [m³/h]	160
Maximum electric power in [W]	58
Sound power level (LWA) in [dB(A)]	48
Reference flow rate [m³/s]	0.031
Reference pressure difference in [Pa]	0
SPI in [W/m³/h]	0.232
Control factor and typology	Local demand control
Internet address	http://www.ventilation-system.com/

*Efficiency according EN13141-7:2010 at reference flow rate

Product range

	Heat exchanger	Air dampers	Preheater	Bypass
Hybrid Max S14	HRV	•		•
Hybrid Max S21		•		•
Hybrid Max E S21		•	•	•
Hybrid Max ERV S14	ERV	•		•
Hybrid Max ERV S21		•		•
Hybrid Max E ERV S21		•	•	•

Accessories

		Hybrid Max E ERV S21
G4 panel filter		FP 233x175x22 G4
F7 panel filter		FP 233x175x22 F7
Control panel		S22
Wireless control panel		S22 Wi-Fi
LCD control panel		S25
Humidity sensor		FS2
Humidity sensor		HR-S
Humidity sensor		DPWC11200
CO₂ sensor with indication		CD-1
CO₂ sensor		CD-2
CO₂ sensor		CD-3
CO₂ sensor		DPWQ40200
VOC sensor		DPWQ30600
Electric reheater		ENH S21 V.2
Outer grille		VDA 125 CFn Al