Blauberg KOMFORT ERV EC DB150 S14
- Capacity diagram
- Designation key
- Overall dimensions
- Additional diagrams
Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings. Reduction of load on air conditioning systems in a hot climate and heat loss in a cold climate due to heat and moisture recovery. Control of air exchange for creating comfortable indoor microclimate. Compatible with round Ø 100 or 150 mm air ducts.
The casing is made of polymer-coated steel panels, internally filled with foamed polyurethane layer 5-10 mm (depend on modification) for heat- and sound-insulation. The unit is equipped with a removable bottom panel for ease of maintenance. This service panel is used to access the filters and the heat exchanger for maintenance operations. The spigots are located at the sides of the unit and are equipped with rubber seals for airtight connection to the air ducts. The casing is equipped with fixing brackets to suspend the unit to the ceiling.
The unit is equipped with high-efficient external rotor EC motors used for air supply and exhaust. The KOMFORT ERV EC DB100 S14, KOMFORT ERV EC DB150 S14 and KOMFORT ERV EC DB250 S14 units are equipped with a centrifugal impeller with forward curved blades and the KOMFORT ERV EC DB350 S14 units – with backward curved blades. EC motors have the best power consumption to air flow ratio and meet the latest demands concerning energy saving and high-efficient ventilation. EC motors are featured with high performance, low noise level and totally controllable speed range. The impellers are dynamically balanced.
The units are equipped with the enthalpy cross flow heat exchangers made of polymerized cellulose. Heat recovery is based on heat and moisture transfer between the extract and supply air streams through the heat exchanger plates. The air flows are fully separated while flowing through the heat exchanger. The process of heat transfer proceeds in the heat exchanger where extract air transfers most of its heat to the intake air flow. This reduces thermal energy losses in cold seasons. In summer heat recovery acts reverse: the cooled extract air transfers part of cold to the warm intake air. This contributes to better performance of the air conditioner in ventilated premises.FROST PROTECTION
The electronic frost protection system is used to prevent the heat exchanger freezing in cold seasons. In case of heat exchanger freezing danger communicated by the temperature sensor the supply fan is stopped to let warm extract air warm up the heat exchanger. After that the supply fan is turned on and the unit reverts to normal operation.AIR FILTRATION
Two built-in G4 and F8 filters provide efficient supply air filtration. The G4 filter is used for extract air filtration.BYPASS
The units are equipped with a bypass for summer ventilation (air cooling by the cool air from outside).
|CONTROL AND AUTOMATION
The KOMFORT ERV EC DB S14 units have an integrated control system with a wall-mounted control panel S14 with a LED indication. The units are equipped with a USB connector (Type B) and can be connected to a PC for configuring the advanced settings in a special software. The standard delivery set includes a 10 m cable for connection of the unit to the control panel. S14 automation functions:
Due to a low casing height the air handling units are a perfect solution for space-restricted installation above suspended ceilings. The unit mounting position must provide access for service maintenance.
|Parameter||KOMFORT ERV EC DB150 S14||Measurement unit|
|Total unit current||0.7||A|
|Sound pressure level at 3 m distance||32||dBА|
|Temperature of transported air||-25...+40||°С|
|Supply filter||G4 / F8 (PM2.5 > 93%)||-|
|Heat recovery efficiency||68...82||%|
|Moisture recovery efficiency||22...41||%|
|Heat exchanger type||cross-flow||-|
|Heat exchanger material||polymerized cellulose||-|
|Connected air duct diameter||100||mm|
|Air duct||for round air ducts||-|
|Type||Supply and exhaust||-|
|Mounting||ceiling mounting , flush mounting||-|
- Selection method:
- Air capacity:
- Air capacity: --
- Pressure: ---
|Serie||Unit type||Motor type||Mounting type||Bypass||Nominal air flow [m³/h]||Control|
|KOMFORT||ERV: energy recovery ventilation||EC: electronically commutated motor||D: suspended mounting, horizontally oriented spigots||B: integrated bypass||100; 150; 250; 350||S14: sensor control panel with LED indication|
|KOMFORT ERV EC DB100 S14||KOMFORT ERV EC DB150 S14||KOMFORT ERV EC DB250 S14||KOMFORT ERV EC DB350 S14|
|G4 panel filter||FP 200x191x20 G4||FP 300x220x48 G4||FP 300x220x48 G4||FP 300x270x48 G4|
|F8 panel filter||FP 200x191x40 F8||FP 300x220x48 F8||FP 300x220x48 F8||FP 300x270x48 F8|
|Internal humidity sensor||FS2||FS2||FS2||FS2|
|CO2 sensor with indication||CD-1||CD-1||CD-1||CD-1|
|Air damper||VKA 100||VKA 100||VKA 150||VKA 150|
|KOMFORT ERV EC DB150 S14||99||704||227||947||854|