Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts

Privacy policy

Blauberg KOMFORT Ultra D 105

Single room heat recovery air handling unit. Maximum air flow up to 106 m³/h.
EAN codeEAN4058448022074
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
  • Overall dimensions
  • Additional diagrams

Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings. Heat recovery minimises ventilation heat losses. Controllable air exchange for creating the best suitable indoor microclimate. Compatible with round Ø 125 mm air ducts.



The compact casing is made of double-skinned aluzinc panels, internally filled with 15 mm PE foam film layer for heat and sound insulation. The casing has mounting angles for easy installation. The spigots for connection to the air ducts are located at the side of the unit and are rubber sealed for airtight connection to the air ducts. The supply and exhaust spigots are equipped with backdraft dampers. The hinged side panel of the casing ensures easy access to the internals for cleaning and other maintenance operations.


Asynchronous motors are used for air supply and exhaust. Centrifugal impeller with forward curved blades ensures high pressure and low noise level. Integrated overheating protection. Dynamically balanced impellers. Equipped with ball bearings for longer service life.


The KOMFORT Ultra D 105-A unit is equipped with a plate cross-flow polystyrene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger. The KOMFORT Ultra D 105 unit is equipped with an enthalpy plate cross-flow heat exchanger for energy (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger. The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air. Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively. In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity. When the indoor and outdoor temperature difference is insignificant, heat recovery is not reasonable. In this case the heat exchanger can be temporary replaced with a summer block for the warm season (available as a specially ordered accessory).


The integrated electronic frost protection system in KOMFORT Ultra D 105-A is used to prevent the heat exchanger freezing in cold seasons. In case of heat exchanger freezing danger communicated by the temperature sensor the supply fan is stopped to let warm extract air warm up the heat exchanger. After that the the supply fan is turned on and the unit reverts to the normal operation mode.


The built-in G4 supply filter and G4 extract filter provide air filtration.


The unit has three speeds. Air flow control by the external speed switch CDP-3/5.


Indoor installation in horizontal position. Mounting in a false ceiling is possible due to compact casing size. A small air distribution network for central ventilation may be arranged based on the unit. The correct mounted unit must provide free access to the hinged side panel for servicing and filter replacement.

Parameter KOMFORT Ultra D 105
(1 speed)
KOMFORT Ultra D 105
(2 speed)
KOMFORT Ultra D 105
(3 speed)
Measurement unit
Voltage 230 230 230 V
Phase 1 1 1 ˜
Frequency 50 50 50 Hz
Current 0.18 0.23 0.34 A
Power 30 38 56 W
RPM 1300 1950 2500 min-1
Maximum air flow 16 22 29 l/s
Maximum air flow 57 78 106 m³/h
Sound pressure level at 3 m 24 32 41 dBА
Extract / supply filter G4 G4 G4 -
Insulation 15 mm polyethylene foam 15 mm polyethylene foam 15 mm polyethylene foam mm
Transported air temperature -25...+40 -25...+40 -25...+40 °С
Heat recovery efficiency 65...76 65...76 65...76 %
Humidity recovery efficiency ...45 ...45 ...45 %
Heat exchanger type cross-flow cross-flow cross-flow -
Heat exchanger material enthalpy enthalpy enthalpy -
Weight 10 10 10 kg
Connected air duct diameter 125 125 125 mm
Casing material aluzinc aluzinc aluzinc -
SEC class D D D -
Mounting ceiling mounting ceiling mounting ceiling mounting -
ErP 2016, 2018 2016, 2018 2016, 2018 -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
Select a document type
  • Catalogues
  • Technical documentation
  • Certificates
KOMFORT Ultra D 105 - data sheet (pdf 898.41Kb)
KOMFORT Ultra D 105(-А) - user's manual (pdf 3Mb)
KOMFORT Ultra D 105 - image (png 565.48Kb)
KOMFORT Ultra D 105 - energy label (pdf 52.04Kb)
KOMFORT Ultra D 105 - specification (pdf 27.68Kb)
Filters maintenance manual (pdf 3.04Mb)
Designation key
Designation key
Series Unit type Mounting type Rated air flow [m³/h] Heat exchanger material
KOMFORT Ultra: compact unit D: suspended mounting, horizontally directed spigots 105 _: enthalpy
–A: polystyrene
    KOMFORT Ultra D 105
G4 panel filter FP 240x202x8 G4
Silencer SD 125
Backdraft air damper VRV 125
Air damper VK 125
Summer block SB C4 200/190
Overall dimensions
Overall dimensions

Model Dimensions [mm]
D B B1 H L L1 L2
 KOMFORT Ultra D 105 125 374 404 224 497 397 595
Additional diagrams
Additional diagrams