Suspended heat recovery air handling unit Reneo-Fit D 100 S14

Description
Characteristics
Capacity diagram
Downloads
Designation key
Accessories
Additional characteristics
Dimensions

Description

FEATURES

Air handling units for efficient supply and exhaust ventilation in flats and apartments. Heat recovery minimizes ventilation heat losses during cold season and reduce air conditioner load during hot season. Controllable air exchange for creating the best suitable indoor microclimate.

DESIGN

The casing is made of expanded polypropylene (EPP) with high heat- and sound-insulating properties.

FANS

High-efficient external rotor EC motors and centrifugal impellers with forward curved blades are used for air supply and exhaust.

AIR FILTRATION

Two built-in G4 and F7 filters provide efficient supply air filtration.The G4 filter is used for extract air filtration.

HEAT RECOVERY


The Reneo-Fit D 100 unit is equipped with a counter-flow polysterene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger.

MOUNTING

The units are designed for suspended ceiling mounting. Service access for maintenance and filter replacement must be provided.

CONTROL AND AUTOMATION

Reneo-Fit D 100 S14 units are equipped with an integrated automation system and an S14 wall-mounted control panel with LED-indication.

AUTOMATION FUNCTIONS

Functions

Description

Unit control via a remote wired control panel

S14 control panel

Speed switch

Filter replacement indication

by filter timer

Alarm indication

LED indication about alarms

Freeze protection

using cyclical stops of the supply fan

Humidity control

option

CO₂ control

option

Fire alarm sensor connection

option

Option: the functionality is available when purchasing the appropriate accessory (see the "Accessories" section)

Characteristics

Parameter	Reneo-Fit D 100 S14	Measurement unit
Voltage	230	V
Phase	1	˜
Frequency	50/60	Hz
Max. unit power	45	W
Max. unit current	0.34	A
Maximum air flow	36	l/s
Maximum air flow	130	m³/h
Sound pressure level at 3 m	32	dBА
Transported air temperature	-23…+40	°С
Insulation	25 mm	mm
Extract filter	G4 / Coarse > 60 %	-
Supply filter	G4 / Coarse > 60 % (option: F7 / ePM1 60 %)	-
Heat recovery efficiency	82–94	%
Heat exchanger type	counter-flow	-
Heat exchanger material	polystyrene	-
Connected air duct diameter	100 / 125	mm
Weight	8	kg
Casing material	EPP	-
Type	Supply and exhaust	-
SEC class	A+	-
Mounting	ceiling mounting	-

Capacity diagram

Selection method:
Air capacity:
Pressure:

Operating point

Air capacity: --
Pressure: ---

Documents archieve

Designation key

Series

Casing modification

Casing type

Heater

Nominal size

Modification

Heat exchanger type

Service side

Controller type

Reneo

–

Fit: compact

D: suspended

_: w/o heater

10: Nominal airflow

0: by default

–

_: heat recovery

_: universal

S14

Accessories

		Reneo-Fit D 100 S14
G4 panel filter		FP 176х150х22 G4
F7 panel filter		FP 176х150х22 F7
Control panel		S14
Humidity sensor		FS2
Humidity sensor		HR-S
CO_₂ sensor		CD-2
CO_₂ sensor with indication		CD-1
Syphon kit (for the units without an enthalpy heat exchanger)		SFK 20x32
Air damper		VKA 125
Electric actuator		TF230

Additional characteristics

Point	Air flow [m³h (l/s)]	Total sound pressure level (breakout) at 3 m (1 m) distance [dB(A)]
1	130 (36) @ 0 Pa	32 (42)
2	91 (25) @ 0 Pa	25 (35)
3	52 (14) @ 0 Pa	16 (26)
4	52 (14) @ 171 Pa	31 (41)
5	96 (27) @ 92 Pa	33 (42)
6	68 (19) @ 50 Pa	25 (34)

Sound power level, A-weighted	Octave frequency band [Hz]								LpA 3 m	LpA 1 m
Sound power level, A-weighted	Total	200	400	800	1000	2000	4000	8000	LpA 3 m	LpA 1 m
L_wA to supply outlet [dBA]	59	44	45	49	51	44	37	38	38	48
L_wA to exhaust inlet [dBA]	47	41	36	33	31	29	22	24	27	36
L_wA to environment [dBA]	53	37	41	43	42	38	34	29	33	42

Sound data provided for point 2 on the diagram.

Dimensions

Model	Overall dimensions [mm]
Model	H	L	L1	W	W1
Reneo-Fit D 100 S14	242	530	630	520	600

Blauberg Reneo-Fit D 100 S14