Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts

Privacy policy

Blauberg Turbo EC 200

Mixed-type duct fans. Maximum air capacity up to 1095 m³/h.
EAN codeEAN4058448046704
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Designation key
Designed for supply and exhaust ventilation systems requiring high energy efficiency, excellent response, high pressure and air flow rate while keeping noise under control – such as high-humidity commercial and industrial spaces (e.g.bathrooms and kitchens) as well as flats, villas, shops and cafes. Compatible with air ducts from 100 to 315 mm in diameter.
The fans feature high-efficiency electronically commutated (EC) direct current motors. These state-of-the-art units offer excellent energy efficiency. In addition to that EC motors combine high performance and optimum response over the entire speed range. The performance efficiency of electronically commutated motors reaches a staggering 90%.
Turbo EC fans combine the versatility and outstanding performance of both axial and centrifugal fans producing a powerful air flow and high pressure while retaining the signature energy-efficiency and response of EC motors.  
The casing of Turbo EC fan is made of low-combustible polypropylene. The removable central unit with a motor, impeller and terminal box is attached to the fittings by means of special mounting brackets with integral latches. This helps to make the fan maintenance extremely simple and convenient. Fan service no longer requires major disassembly and dismantling of the fan: all you have to do is remove the main unit from the casing and carry out the maintenance as required. The inlet fitting has a profiled header which ensures smooth air flow into the fan. Conically shaped impelles with specially profiled blades cause circular velosity rise, that resuts in airflow boost and pressure increase comparing to conventional design. 
The fan outlet combination of a diffuser, specially designed impeller and rectifier allow for the optimim air distribution: high air capacity and pressure without excessive noise.
The fans are controlled by means of a 0-10 V control signal while the performance regulation is based on the feedback from the temperature, smoke and other sensors as well as other vital parameter settings. As the control signal changes the EC fan changes speed accordingly to supply the exact air amount required by the ventilation system. The maximum fan speed does not depend on the electric mains frequency enabling compatibility with both 50 Hz and 60 Hz networks. The fans can be easily combined into a single computer-controlled network. Special software allows for precise control over the operating parameters of the network units. All the system parameters can be monitored from the computer screen allowing to program operating parameters for each fan on the network individually. Integration of several fans into a single computer-controlled system with sensor feedback combined with speed control across the entire dynamic range.
The fans are intended for installation in matching diameter air ducts at any point of the ventilation system without limitation to mounting angle.  
The fan casing has a flat mounting plate for a secure wall mounting.
Electrical connection and installation must be performed in accordance with the instruction manual and the electrical connections diagram applied to the terminal box. A single system may have several fans installed in parallel to boost the output capacity or in series to boost the working pressure.  
Parameter Turbo EC 200 Measurement unit
Voltage 230 V
Phase 1 ˜
Frequency 50/60 Hz
Current 0.99 A
Power 140 W
RPM 2880 min-1
Maximum air flow 304 l/s
Maximum air flow 1095 m³/h
Sound pressure level at a distance of 3 m 49 dBА
Temperature of transported air -25...+55 °С
EC motor yes -
Ingress protection rating IPX4 -
Connecting piece 200 mm
Motor IP rating IP44 -
Weight 3.95 kg
Design axial, centrifugal -
SEC class -
Mounting Inline -
ErP 2016, 2018 -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
Turbo EC 200 - Specification (pdf 25.74Kb)
Turbo EC - data sheet (png 499.44Kb)
Turbo EC - image (png 499.44Kb)
Turbo EC - user's manual (pdf 1.57Mb)
Designation key
Designation key
Series Motor type Duct diameter [mm]
Turbo EC: electronically commutated motor 100; 125; 150; 160; 200; 250; 315

Model Dimensions [mm]
Turbo EC 200 198.0 239.0 277.5 295.5