Blauberg Vento Eco Standard

Print version

Heat recovery single-room units. Maximum air flow up to 50 m³/h.

EAN

Add to project

To comparison

Description
Characteristics
Downloads
Dimensions
Designation key
Technical data
Accessories

Description

FEATURES
Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises. Air purification with optional F7 filter PM2.5 > 99 %. Protection from outdoor noise. Reducing heat losses caused by ventilation due to heat recovery. Humidity balance and regulated air exchange create individually controlled microclimate.
DESIGN

HEAT AND HUMIDITY REGENERATION
UNIT OPERATING LOGIC IN WINTER PERIOD

Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it. As the ceramic regenerator gets warmed up, the unit switches to the supply mode.	Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity. When the ceramic regenerator is cooled down, the unit switches to the extract air mode.
CONTROL
Control of the unit operation mode is performed by means of the sensor control panel.	One control panel with sensor buttons can control up to two units. Low voltage (12 V) power supply between control panel and Vento Eco units.
MOUNTING
The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.	One unit is able to ventilate a room up to 25 m². For bigger rooms two or more units must be installed.

Characteristics

Parameter	Vento Eco Standard (1 speed)	Vento Eco Standard (2 speed)	Vento Eco Standard (3 speed)	Measurement unit
Voltage	100-240	100-240	100-240	V
Frequency	50/60	50/60	50/60	Hz
Power	1.00	2.10	4.30	W
Current	0.017	0.025	0.041	A
Air flow in ventilation mode	15	30	50	m³/h
RPM	915	1555	2330	min^-1
Air flow in ventilation mode	4	8	14	l/s
Air flow in heat recovery mode	8	15	25	m³/h
Air flow in heat recovery mode	2	4	7	l/s
SFP	0.48	0.50	0.62	W/l/s
Sound pressure level at 1 m in accordance with ISO 3741:2004	21	27	29	dBА
Sound pressure level at 3 m in accordance with ISO 3741:2004	12	18	20	dBА
Transported air temperature	-20 (-30**)…+40	-20 (-30**)…+40	-20 (-30**)…+40	°С
Ingress protection rating	IP24	IP24	IP24	-
Filter	G3 (Option: F8 PM2,5 > 99 %*)	G3 (Option: F8 PM2,5 > 99 %*)	G3 (Option: F8 PM2,5 > 99 %*)	-
EC motor	yes	yes	yes	-
Air duct	160	160	160	-
Outdoor sound pressure attenuation in accordance with DIN EN 20140	41	41	41	dBА
Mounting	wall mounting	wall mounting	wall mounting	-
Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8	S3***	S3***	S3***	-
Heat recovery efficiency in accordance with DIBt LÜ-A 20	up to 92	up to 92	up to 92	%
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8	D1	D1	D1	-
*	Maximum air flow 40 m³/h	Maximum air flow 40 m³/h	Maximum air flow 40 m³/h	-
**	With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied	With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied	With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied	-
***	At III speed	At III speed	At III speed	-

Documents archieve

Dimensions

Designation key

Model	Version	Ventilation hood type	Control
Vento Eco	Standard: monoblock cartrige Komfort: split cartrige	_: S11 plastic hood for standard walls S: metal hood for thin walls	_: without control panel Pro: sensor control panel

Technical data

Parameters	Vento Eco Standard
Speed	1	2	3
Voltage [V / 50 (60) Hz]	100-240
Power [W]	1.00	2.10	4.30
Current [A]	0.017	0.025	0.041
RPM [min⁻¹]	915	1555	2330
Air flow in ventilation mode [m³/h (l/s)]	15 (4)	30 (8)	50 (14)
Air flow in heat recovery mode [m³/h (l/s)]	8 (2)	15 (4)	25 (7)
SFP [W/l/s]	0.48	0.50	0.62
Filter	G3 (Option: F8 PM2,5 > 99 %*)
Transported air temperature [°C]	-20(-30**) … +40
Sound pressure level at 1 m according to ISO 3741: 2004 [dBA]	21	27	29
Sound pressure level at 3 m according to ISO 3741: 2004 [dBA]	12	18	20
Outdoor sound pressure attenuation according to DIN EN 20140 [dBA]	41
Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8	S3***
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8	D1
Heat recovery efficiency according to DIBt LÜ-A 20 [%]	up to 92
Ingress protection rating	IP24
* maximum air flow 40 m³/h with ZL1 Vento 160/100 cartridge and AH-8 outer hood applied * at III speed

Accessories

Name		Description
Completion Kit Vento Eco Standard		Indoor grille and cartridge with heat regenerator, fan and G3 filters
Completion Kit Vento Eco Comfort		Indoor grille and cartridge with heat regenerator, fan G3 filters and F7 filter holder
FP2 Vento G3		G3 filters (2 pcs.)
FP2 Vento G4		Coarse filter. Includes: • Plastic filter holder (1 pc.) • G4 filter (1 pc.).
FP2 Vento F7		Coarse filter. Includes: • Plastic filter holder (1 pc.) • F7 filter (1 pc.).
FPC 150x50 G4		G4 coarse filter
FPC 150x50 F7		F7 fine filter. Filtration rate PM2.5 > 70 %
AH-8 white 160		White painted aluminium outer ventilation hood with frost protection for a cold climate
AH-8 chrome 160		Brushed stainless steel outer ventilation hood with frost protection for a cold climate
*AH-10 colour* 160**		Plastic outer ventilation hood. Available in colours:
AH-10 chrome 160		Plastic outer ventilation hood with a plate with brushed stainless steel effect finish
*AH-11 colour* 160**		Plastic outer ventilation hood. Available in colours:
AH-S chrome 160		Outer ventilation hood for thin wall made of brushed stainless steel
AH-S white 160		Outer ventilation hood for thin wall made of stainless steel, painted white
PP 160/0.5		Outer ventilation hood for mounting from inside
KIT BlauPlast white 160		Kit for angular mounting with white colour grille (for walls with standard thickness)
KIT BlauPlast chrome 160		Kit for angular mounting with stainless steel outer grille (for walls with standard thickness)
R 160-500		500 mm air duct and plastic foam plug
R 160-700		700 mm air duct and plastic foam plug
SE Vento Eco A50 Pro		Sensor control panel