Blauberg Vento Expert Duo A30-1 S10 Pro

Print version

Heat recovery single-room units. Maximum air flow up to 30 m³/h.

EAN4058448060953

Add to project

To comparison

Description
Characteristics
Downloads
Designation key
Dimensions
Technical data
Accessories

Description

Dear partners!
Please note that as of the end of the third quarter of 2020, in order to increase the efficiency of the Vento Expert Duo, the company manufactures products with regenerators divided into two sections.

Features

Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Reducing heat losses caused by ventilation due to heat recovery.Humidity balance and regulated air exchange create individually controlled microclimate.Coordinated network based on several integrated single-room ventilation units with central control.

Design

Easy maintenance. Indoor unit is opened by pressing the latches on both sides.

One of the best regeneration efficiency on the market due to innovative hexagonal structure of the heat exchanger cells.

HEAT AND HUMIDITY REGENERATION

UNIT OPERATING LOGIC IN WINTER PERIOD

To increase the efficiency of the Vento Expert Duo, the regenerator is divided into two parts, which are isolated from one another, thus eliminating the transfer of heat and moisture between them.One of the fans operates in the supply mode: fresh cold intake air from outside flows through the first regenerator, and absorbs accumulated heat and humidity.

At the same time, the other fan operates in the exhaust mode: warm stale air is extracted from the room to the outside, and while passing through the other regenerator, gradually heats it up and transfers some of the moisture.After 70 seconds operation the fans change the rotation direction and opposite processes start.

Control

Control of the unit operation mode is performed by means of the sensor control panel located on the unit casing or the remote controller.

Vento Expert Duo either can operate as independent unit or can be wired with other units in a house and controlled with a master unit. In this case, only the master unit receives a signal from the remote control.

Vento Expert Duo is equipped with a humidity sensor for indoor humidity control. If humidity increases above a set point, the unit boosts to the speed III.

Mounting

Vento Expert Duo must be installed in each room with high humidity like kitchen, bathroom to be ventilated while Vento Expert must be installed in each living room to be ventilated.

The unit is designed for through-the-wall installation inside a prepared core hole in an outer wall of the building.

Characteristics

Parameter	Vento Expert Duo A30-1 S10 Pro (1 speed)	Vento Expert Duo A30-1 S10 Pro (2 speed)	Vento Expert Duo A30-1 S10 Pro (3 speed)	Measurement unit
Voltage	100-240	100-240	100-240	V
Frequency	50/60	50/60	50/60	Hz
Power	2.00	3.70	6.40	W
Current	0.027	0.043	0.067	A
RPM	1600	2200	2500	min^-1
Air flow in heat recovery mode	60	60	60	m³/h
Air flow in heat recovery mode	16	16	16	l/s
Maximum air flow	3	6	8	l/s
Maximum air flow	10	20	30	m³/h
SFP	0.72	0.67	0.77	W/l/s
Sound pressure level at 1 m in accordance with ISO 3741:2004	33	40	43	dBА
Sound pressure level at 3 m in accordance with ISO 3741:2004	24	31	34	dBА
Filter	G3	G3	G3	-
Transported air temperature	-15…+40	-15…+40	-15…+40	°С
Ingress protection rating	IP24	IP24	IP24	-
EC motor	yes	yes	yes	-
Functions	Filter replacement indication, Timer, Humidity sensor, External sensor connection	Filter replacement indication, Timer, Humidity sensor, External sensor connection	Filter replacement indication, Timer, Humidity sensor, External sensor connection	-
Air duct	160	160	160	-
Outdoor sound pressure attenuation in accordance with DIN EN 20140	42	42	42	dBА
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8	D2	D2	D2	-
Heat recovery efficiency in accordance with DIBt LÜ-A 20	up to 85	up to 85	up to 85	%

Documents archieve

Designation key

Model	Fans	Air duct	Rated air flow [m³/h]	Front panel	Ventilation hood type	Control
Vento Expert	Duo: two fans with different rotation direction	A: round air duct	30	-1: flat front panel	S10: white plastic hood AH-10 white 160 Duo	Pro: control with touch buttons and a remote control

Dimensions

Technical data

Parameters	Vento Expert Duo A30-1 S10 Pro
Speed	1	2	3
Voltage [V / 50 (60) Hz]	100-240
Power [W]	2.00	3.70	6.40
Current [A]	0.027	0.043	0.067
RPM [min^⁻1]	1600	2200	2500
Air flow [m³/h (l/s)]	10 (3)	20 (6)	30 (8)
Air flow in humidity extract mode [m³/h (l/s)]	60 (16)
SFP [W/l/s]	0.72	0.67	0.77
Filter	G3
Transported air temperature [°C]	-15…+40
Sound pressure level at 1 m [dBA]	33	40	43
Sound pressure level at 3 m [dBA]	24	31	34
Outdoor sound pressure attenuation [dBA] in accordance with DIN EN 20140	42
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8	D2
Heat recovery efficiency according to DIBt LÜ-A 20 [%]	up to 85
Ingress protection rating	IP24

Accessories

Name		Description
FP VENTO Expert DUO A50 G3		G3 filter set. Includes: • Rectangular filter G3 (2 pcs.) • Semicircular filter G3 (2 pcs.)
FP1 Vento Expert Duo A30 G3		G3 filter set. Includes: • Rectangular filter G3 (2 pcs.) • Semicircular filter G3 (2 pcs.) • Plastic filter holder (2 pcs.)
*AH-10 color* 160 Duo**		Plastic outer ventilation hood. Available in colours:
AH-10 chrome 160 DUO		Plastic outer ventilation hood with a plate with brushed stainless steel effect finish
AH-5 white 160 DUO		Stainless steel outer ventilation hood, painted white
AH-5 chrome 160 DUO		Outer ventilation hood made of brushed stainless steel
PP 160/0.5		Outer ventilation hood for mounting from inside
R 160-500		500 mm air duct and plastic foam plug
R 160-700		700 mm air duct and plastic foam plug
LST Vento Expert DUO		Air stream separator
FB Vento Expert A50		Remote control
CD-1		CO₂ sensor with LED CO₂ indication and sensor button for operation mode selection
CD-2		CO₂ sensor