Supply ventilation unit Blaubox EC MW 3000 S31

Description
Characteristics
Downloads
Designation key
Accessories
Overall dimensions
Additional diagrams

Description

FEATURES

Ventilation units for efficient supply ventilation in various premises.Controllable air supply, heating and filtration.BMS connection via ModBUS RTU.

DESIGN

Steel casing covered with aluzinc coating internally filled with 30 mm heat- and sound-insulating layer made of mineral wool.Mounting brackets with anti-vibration rubber. Service panel ensures easy access to the internals.Blaubox EC MW 700 is compatible with round ducts.

Blaubox EC MW 700

Blaubox EC MW 1000 … 4000

FANS

Efficient external rotor EC-motors and centrifugal impellers with backward curved blades.EC-motors are featured with high performance, low noise level and totally controllable speed range.Dynamically balanced impeller.

AIR FILTRATION

Panel Coarse 90% (G4) filter for supply air purification.Panel ePM10 70% (F7) filter is available as an option.

AIR HEATER

The unit is equipped with a water heater. Integrated frost protection.

MOUNTING

The unit is suitable for indoor mounting on the floor, ceiling mounting or wall mounting with fixing brackets in any mounting position, except for the vertical one with air flow downwards. The correct mounted unit must provide free access to the service panel.

CONTROL AND AUTOMATION

The units are equipped with an S31 integrated automation control system. Remote control panels are not included in the delivery set and ordered separately.

AUTOMATION FUNCTIONS

Functions

Description

Vired control panel

S30

Vired control panel

S32

Unit on / off

Fan speed control and setting

Filter clogging indication and control

Pressure sensor

Week schedule

Electric heater protection with auto restart

Electric heater protection with manual restart

Supply temperature control

Outer temperature sensor

Water heater frost protection

Return temperature sensor

Air damper control

Alarm indication

BMS Connection

ModBUS (RTU)

Humidity sensor

0-10V or NO

CO2 Sensor

0-10V or NO

Exhaust fan control

on / off

Three-way valve control

Circulation pump control

Condensing unit control

0-10V

Option: function is available when purchasing the appropriate accessory (see the"Accessories" section).

Characteristics

Parameter	Blaubox EC MW 3000 S31	Measurement unit
Voltage	230	V
Phase	1	˜
Frequency	50	Hz
Max. unit power	425	W
Max. unit current	1.8	A
Maximum air flow	2930	m³/h
Number of water coil rows	4	-
Sound pressure level at 3 m	52	dBА
Water coil connection diameter	1 1/8	in
Insulation	30 mm mineral wool	mm
Max. water temperature	150	°С
Transported air temperature	-30…+40	°С
Filter	Coarce 90% / G4 (option: ePM1 70% / F7)	-
EC motor	yes	-
Weight	50	kg
Connected air duct diameter	600 x 300	mm
Casing material	aluzinc	-
Outdoor mounting	no	-
Air duct	for rectangular air ducts	-
Design	centrifugal	-
Type	Supply	-
Mounting	ceiling mounting, wall mounting, floor mounting	-
ErP	2018	-

Documents archieve

Designation key

Series	Motor type	Heater type	Rated air flow [m³/h]	Service side	Control
Blaubox: supply air unit	EC: electronically commutated motor	MW: water	700; 1000; 1500; 2000; 3000; 4000	L: left R: right	S31

Accessories

		Blaubox EC MW 3000
Panel filter G4		FP 734х435х80 Coarse 90% / G4
Panel filter F7		FP 734х435х80 ePM1 70% / F7
Flexible anti-vibration connector		EVA 60x30
Silencer		SD 60x30
Air damper		SL 60x30
Air damper electric actuator		TF230 / TF24

Overall dimensions

Model	Overall dimensions [mm]
Model	H	H1	H2	L	L1	L2	W	W1	W2	W3
Blaubox EC MW 3000 S31	500	300	368	1200	1070	65	800	853	944	600

Additional diagrams


HOW TO USE WATER HEATER DIAGRAMS
Air Speed. Starting from 2000 m³/h on the air flow scale draw a vertical line ➀ till the air speed axis which makes about 2.2 m/s.Supply air temperature. Prolong the line ➀ up to the point where it crosses the outside air temperature (blue curve), e.g. -15 °C; then draw a horizontal line ➁ from this point to the left till crossing water in/out temperature curve (70/50 °C). From this point draw a vertical line ➂ to the supply air temperature axis on top of the graphic (+43 °C).	Heating coil capacity. Prolong the line ➀ up to the point where it crosses the outside air temperature -15 °C (red curve) and draw a horizontal line ➃ from this point to the right until it crosses water in/out temperature curve (70/50 °C), from here draw a vertical line ➄ up to the scale representing the heating coil capacity (45 kW).Water flow. Prolong the line ➄ down to water flow axis at the bottom of the graphic ➅ (2650 kg/h).Water pressure drop. Draw the line ➆ from the point where line ➅ crosses the black curve to the pressure drop axis. (24 kPa).

Blauberg Blaubox EC MW 3000 S31