Blauberg Iso-Mix 125
Supply and exhaust ventilation systems installed in various premises with high requirements to the noise level.For ventilation air ducts requiring high pressure, powerful air flow and low noise level.Compatible with Ø 100 up to Ø 315 mm air ducts.
The casing is made of polymer-coated steel, internally filled with 50 mm mineral wool thermal- and sound-insulating layer.Special inner perforation of the casing and sound-insulating material are designed for wide-frequency sound absorbing.Mixed-flow impeller made of high-quality plastic.The diffusor, the specially profiled impeller and directing vanes provide high performance and powerful pressure combined with low noise operation.External airtight terminal block on the fan casing for power supply.Mounting brackets on the fan casing for mounting to the floor, to the wall or ceiling.
Speed selection with a built-in speed switch (US option) or an external multi-speed switch (special accessory).Smooth speed control is possible either with an integrated speed switch (FR option), an external thyristor or transformer speed controller (special accessory) when connected to the maximum speed terminal.
Due to its compact design the fan is the ideal solution for mounting in limited spaces.The fan is suitable for mounting in any section of the ventilation system from intake to the end of the ductwork.Wall or ceiling mounting with a special mounting plate on the fan casing.
Double-speed single-phase high-efficient motor with low energy demand on ball bearings.Overheating protection by built-in thermal switches.Motor ingress protection rating IPX4.
MODIFICATIONS AND OPTIONS
T – adjustable run-out timer regulated from 2 to 30 minutes.US – three-position speed switch integrated in the fan.FR – built-in smooth speed controller from 0 to 100 %. The fan is supplied with a pre-wired power cable with IEC plug as a standard. The cable modification with a standard electric plug is also available (FR1)G – smooth speed controller with an electronic thermostat and an external temperature sensor that is fixed on 4 m cable. The fan is supplied with a pre-wired power cable with IEC plug as a standard. The cable modification with a standard electric plug is also available (G1).
GI – smooth speed controller with an electronic thermostat and a temperature sensor integrated into the air duct. The fan is supplied with a pre-wired power cable with IEC plug as a standard. The cable modification with a standard electric plug is also available (GI1).
|Parameter||Iso-Mix 125 min||Iso-Mix 125 max||Measurement unit|
|Maximum air capacity||235||347||m³/h|
|Sound pressure level at 3 m distance||23||28||dB(А)|
|Max. operating temperature||60||60||°С|
|Ingress protection rating||IPX4||IPX4||-|
|Casing material||polymer coated steel||polymer coated steel||-|
|Air duct||for round air ducts||for round air ducts||-|
|Type||Exhaust , Supply||Exhaust , Supply||-|