Blauberg KOMFORT EC D5B180-E S14
- Capacity diagram
- Designation key
- Additional characteristics
Air handling units for efficient supply and exhaust ventilation in flats, houses, cottages and other buildings.Heat recovery minimizes ventilation heat losses during cold season and reduce air conditioner load during hot season.Controllable air exchange for creating the best suitable indoor microclimate.Compatible with round Ø 150 mm air ducts.DESIGN
The casing is made of expanded polypropylene (EPP) 15–30 mm thick with high heat- and sound-insulating properties.The spigots are located at the side of the unit and are rubber sealed for airtight connection to the air ducts.
High-efficient external rotor EC motors and centrifugal impellers with forward curved blades are used for air supply and exhaust.EC motors have the best power consumption to air flow ratio and meet the latest demands concerning energy saving and high-efficient ventilation.EC motors are featured with high performance, low noise level and totally controllable speed range.Dynamically balanced impellers.
Two built-in G4 and F7 filters provide efficient supply air filtration.The G4 filter is used for extract air filtration.
The KOMFORT EC D5B180(-E) models are equipped with a bypass which can be opened if there is a need to cool down the ventilated area with cool intake air.
The KOMFORT EC D5(B)180 unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. In the unit condensate is collected and drained to the drain pan under the heat exchanger.The KOMFORT EC D5(B)180-E unit is equipped with an enthalpy plate counter-flow heat exchanger for enegry (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger.
The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air.Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively.In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity.
The units are designed for suspended ceiling mounting, vertical or horizontal wall mounting.Sufficient service access for maintenance and filter replacement must be provided.
|CONTROL AND AUTOMATION|
The KOMFORT EC D5B180(-E) S21 units are equipped with a built-in automation system. The remote control panel is not included in the delivery set (sold separately). The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management Systems). Unit control via Wi-Fi using the mobile application Blauberg AHU.
The KOMFORT EC D5B180(-E) S14 units are equipped with an integrated automation system and an S14 wall mounted sensor control panel with LED-indication. The KOMFORT EC D5 180(-E) S2 units are equipped with a CDT E/0-10 speed regulator.
|Parameter||KOMFORT EC D5B180-E S14||Measurement unit|
|Total unit current||0.71||A|
|Sound pressure level at 3 m distance||33||dBА|
|Temperature of transported air||-25…+40||°С|
|Insulating material||15-30 mm, EPP||mm|
|Supply filter||G4, F7||-|
|Heat recovery efficiency||79-94||%|
|Heat exchanger type||counter-flow||-|
|Heat exchanger material||enthalpy||-|
|Connected air duct diameter||150||mm|
|Type||Supply and exhaust||-|
|Mounting||ceiling mounting, wall mounting||-|
- Selection method:
- Air capacity:
- Air capacity: --
- Pressure: ---
|Series||Motor type||Spigot orientation||Casing modification||Bypass||Nominal air flow [m³/h]||Heat exchanger type||Control|
|KOMFORT||EC: electronically commutated motor||D: suspended mounting, horizontally oriented spigots||5: EPP||_: without a bypass
B: integrated bypass
|180||_: heat recovery
–E: energy recovery
|KOMFORT EC D5B180-E S14|
|G4 panel filter||FP 214x186x18 G4|
|F7 panel filter||FP 214x186x48 F7|
|Wi-Fi control panel||–|
|LCD control panel||–|
|Internal humidity sensor||FS2|
|CO₂ sensor with indication||CD-1|
(for the units without an enthalpy heat exchanger)
|Air damper||VKA 150|
|Model||Overall dimensions [mm]|
|KOMFORT EC D5B180-E S14||150||600||900||1009||264|
|Sound power level, A-weighted||Total||Octave frequency band [Hz]||LpA 3 m [dBA]||LpA 1 m [dBA]|
|LwA to supply inlet [dBA]||59||27||46||54||55||53||48||44||35|
|LwA to supply outlet [dBA]||60||27||46||54||55||53||49||44||35|
|LwA to exhaust inlet [dBA]||55||25||41||50||51||44||42||39||30|
|LwA to exhaust outlet [dBA]||55||26||41||51||51||44||42||39||31|
|LwA to environment [dBA]||54||18||36||47||49||48||43||37||33||33||43|
* Data provided for point 1 of the air flow diagram
|Exhaust spigot configuration||Air flow rate [l/s]||Specific fan power [W/l/s]||Heat exchange efficiency [%]|
|Kitchen + 1 additional wet room||21||0.90||88|
|Kitchen + 2 additional wet rooms||29||1.00||86|
|Kitchen + 3 additional wet rooms||37||1.20||85|
Calculation of air temperature downstream of the heat exchanger:
t = toutd + khr × (textr - toutd) / 100,
where toutd – outdoor air temperature [°C] textr – extract air temperature [°C] khr – heat exchanger efficiency (according to the diagram) [%]