Login
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Online consultation from experts
Signup

Privacy policy

Blauberg KOMFORT EC SB160 S14


Heat recovery air handling unit. Maximum air flow up to 200 m³/h.
EAN codeEAN4058448021633
  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
  • Dimensions
  • Additional characteristics
Description
Description
FEATURES

Air handling units for efficient energy saving supply and exhaust ventilation in flats, houses, cottages and other premises. Heat and humidity recovery minimizes ventilation heat losses during cold season and reduces air conditioner load during hot season. Controllable air exchange for creating the best suitable indoor microclimate. Compatible with round Ø 125, 160 or 200 mm air ducts.

FANS

The units are equipped with high-efficient EC motors with an external rotor and a centrifugal impeller with backward curved blades. EC motors have the best power consumption to air capacity ratio and meet the latest demands concerning energy saving and high-efficient ventilation. EC motors are featured with high performance, low noise level and optimum control across the entire speed range. The impellers are dynamically balanced.

BYPASS

The KOMFORT EC SB(-E) units are equipped with a bypass for ventilation (air cooling by the cool air from outside).

DESIGN

The casing is made of double-skinned polymer-coated steel panels, internally filled with 20, 25, 30, 40 mm (depending on the unit model) mineral wool layer for heat- and sound-insulation. The unit is equipped with a hinged service panel to enable convenient access for maintenance or repair operations. The spigots are located at the top of the unit and are equipped with rubber seals for airtight connection to the air ducts.

AIR FILTRATION

The built-in F7 filter provides efficient supply air filtration. The G4 filter is used for extract air cleaning. The G3 filters are used for supply and exhaust air filtration in the KOMFORT EC S(B)200 units. Supply air in the KOMFORT EC S(B)250 units is purified by the G4 and F7 filters. The G4 filter is used for extract air cleaning.

   
 
HEAT RECOVERY

The KOMFORT EC S(B) unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. In the unit condensate is collected and drained to the drain pan under the heat exchanger.

 

The KOMFORT EC S(B)-E unit is equipped with an enthalpy plate counter-flow heat exchanger for enegry (heat and humidity) recovery. Due to humidity recovery condensate is not generated in the enthalpy heat exchanger. The air flows are completely separated in the heat exchanger. Thus smells and contaminants are not transferred from the extract air to the supply air. Heat recovery is based on heat and/or humidity transfer through the heat exchanger plates. In the cold season supply air is heated in the heat exchanger by transferring the heat energy of warm and humid extract air to the cold fresh air. Heat recovery minimizes ventilation heat losses and heating costs respectively. In the warm season the heat exchanger performs reverse and intake air is cooled in the heat exchanger by the cool extract air. That reduces operation load on air conditioners and saves electricity. When the indoor and outdoor temperature difference is insignificant, heat recovery is not reasonable. In this case the heat exchanger can be temporary replaced with a summer block for the warm season (available as a specially ordered accessory).

MOUNTING

The units are designed for wall or floor mounting. Universal casing design provides either left-handed or right-handed unit installation.

CONTROL AND AUTOMATION

The KOMFORT EC S(B)(-E) S21 units are equipped with a build-in automation system. The remote control panel is not included in the delivery set (available separately). The S21 controller allows integrating the unit into the Smart Home system or BMS (Building Management Systems). The unit can be controlled by the Blauberg AHU mobile application via Wi-Fi.

Download
the Blauberg AHU
app for Android

Download
the Blauberg AHU
app for iOS

The KOMFORT EC S(B)(-E) S14 units have an integrated automation system with a wall-mounted control panel S14 with a LED indication. The KOMFORT EC S(B)200 and KOMFORT EC S250 are available only with an S14 automation.

AUTOMATION FUNCTIONS  
Functions KOMFORT EC S(B)(-E) S21 KOMFORT EC S(B)(-E) S14
Unit control via Wi-Fi using a mobile application + -
Unit control via a wired remote control panel
S22 control panel (option)
S14 control panel
Unit control via a wireless remote control panel
S22 Wi-Fi control panel (option)
-
Unit control via a wired remote LCD control panel
S25 control panel (option)
-
BMS (Building Management Systems) RS-485 -
Wi-Fi -
Ethernet -
MODBUS (RTU, TCP) -
Blauberg Cloud Server service + -
Speed selection + +
Filter replacement indication according to filter timer according to filter timer
according to filter clogging differential pressure switch readings (KOMFORT EC SB550) -
Alarm indication full alarm description in the mobile application LED alarm indication
Week-scheduled operation + -
Bypass automatic -
manual manual
Timers + -
Boost mode + -
Fireplace mode + -
Freeze protection through cyclic stops of the supply fan through cyclic stops of the supply fan
through preheating (option) -
Reheater connection option -
Cooler connection option -
Minimum supply air temperature control + -
Humidity control option option
CO2 controller option option
VOC controller option -
PM2.5 control option -
Fire alarm sensor connection option option
option: function is available when purchasing the appropriate accessory (see the "Accessories" section).
Characteristics
Characteristics
Parameter KOMFORT EC SB160 S14 Measurement unit
Voltage 220-240 V
Phase 1 ˜
Frequency 50/60 Hz
Current 0.5 A
Power 57 W
RPM 3770 min-1
Air capacity 200 m³/h
Air capacity 56 l/s
Sound pressure level at 3 m distance 24 dBА
EC motor yes -
Temperature of transported air -25...+40 °С
Insulating material 20 mm mineral wool mm
Extract filter G4 -
Supply filter F7 (option: G4) -
Heat recovery efficiency 85...93 %
Heat exchanger type counter-flow -
Heat exchanger material polystyrene -
Weight 36 kg
Connected air duct diameter 125 mm
Casing material polymer coated steel -
SEC class A+ -
Mounting wall mounting, floor mounting -
ErP 2016, 2018 -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air capacity:
  • Pressure:
Operating point
  • Air capacity: --
  • Pressure: ---
Documents archieve
Documents archieve
Name
S14 / S15 automation - software (zip 13.08Mb)
KOMFORT EC S(B)(-E) S21/S14 - data sheet (pdf 1.48Mb)
KOMFORT EC S(B)(-E) S21/S14 - user's manual (pdf 3.91Mb)
KOMFORT EC SB160 S14 - energy label (pdf 52.55Kb)
KOMFORT EC S(B) 160/350/550 (-E) S14 - image (png 403.8Kb)
Designation key
Designation key
Series Motor type Spigot modification Bypass Nominal air flow, [m³/h] Heat exchanger type Automation
KOMFORT EC: electronically commutated motor S: vertical _: no bypass

B: with a bypass
160; 200; 250; 350; 550 _: heat recovery

-E: heat and humidity recovery
S21

S14
Accessories
Accessories
  KOMFORT EC SB160 S14
G3 panel filter
G4 panel filter FP 285x195x10 G4
F7 panel filter FP 285x195x10 F7
Control panel
Wi-Fi control panel
LCD control panel
Internal humidity sensor FS2
CO2 sensor with indication CD-1
CO2 CD-2
Humidity sensor HR-S
VOC sensor
CO2
Humidity sensor
Kitchen exhaust hood DAH 251-13
Electric preheater
Electric reheater
Syphon kit (for the units without an enthalpy heat exchanger) SFK 20x32
Air damper VKA 125
Electric actuator LF230
Summer block
Dimensions
Dimensions

Model Overall dimensions [mm]
Ø D B B1 H H1 L
KOMFORT EC SB160 S14 125 330 340 665 580 600
Additional characteristics
Additional characteristics
Point Total power of the unit [W] Sound pressure level at 3 m (1 m) [dBA]
1 57 24 (34)
2 56 23 (33)
3 54 23 (33)
4 28 20 (30)
5 27 20 (30)
6 26 20 (30)
7 14 13 (23)
8 13 13 (23)
9 13 13 (23)

 

Sound power level, A-weighted Gen. Octave frequency band [Hz] LpA 3 m [dBA] LpA 1 m [dBA]
63 125 250 500 1000 2000 4000 8000
LwA to supply inlet [dBA] 52 28 46 49 41 35 33 36 29    
LwA to supply outlet [dBA] 60 32 52 58 47 37 36 41 35    
LwA to exhaust inlet [dBA] 51 27 45 49 41 36 32 35 29    
LwA to exhaust outlet [dBA] 60 31 50 59 48 36 36 41 32    
LwA to environment [dBA] 45 25 41 42 34 31 28 27 22 24 34

Data provided for point 1 of the air flow diagram

 

Calculation of air temperature downstream of the heat exchanger:
t = toutd + khr × (textr - toutd) / 100,

where toutd – outdoor air temperature [°C] textr – extract air temperature [°C] khr – heat exchanger efficiency (according to the diagram) [%]

AccessoriesSimilar products