Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Current | Maximum air flow | Frequency | RPM | Speed | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Insulation class | Fan current | Number of electrical heating elements | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Fan power | Air flow in ventilation mode | Connected air duct size | Filter | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Humidity recovery efficiency | Insulation | Heat recovery efficiency | Total unit power | Rated current | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air flow in ventilation mode | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Air flow in heat recovery mode | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8 | * | Motor max. power | ** | *** | Transported air temperature | Perm. amb. temp. | Max. air flow at air flow direction (direct air flow) | Max. air flow at air flow direction (perpendicular air flow) | Lamp model Osram | Starting current | Radiation power (UVC) | Lamp dimensions | Max. water temperature | Water coil connection diameter |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Axis-Q EC 200 max | 230 | wall mounting | axial | 210 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | - | 1600 | 50/60 | 2900 | - | - | Supply and exhaust | - | 115 | - | - | IPX5 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | –25…+60 | - | - | - | - | - | - | - | - | - | - | - | 444 | - | 2.04 | - | - | - | - | - | - | IP55 | - | - | - | - | - | - | 0.85 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Clean Box 150 G4-F8-Carbon UV | 1 ~ 230 | ceiling mounting, wall mounting, flush mounting | - | 150 | for round air ducts | - | - | polymer-coated steel | - | - | - | - | - | - | 50/60 | - | - | - | Supply | 13.3 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | HNS L 60 W 2G11 | 40 | 19 | 408 x 40 | - | - |
Tower-V 355 4D (50 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.58 | 914 | 50 | 1430 | - | - | Exhaust | 26 | 264 | -30…+60 | - | IPX4 | 3 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3290 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 355 4D (60 Hz) | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.64 | 983 | 60 | 1650 | - | - | Exhaust | 26 | 330 | -30…+60 | - | IPX4 | 3 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3540 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 200 | 230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 0.63 | 845 | 50/60 | 2500 | - | - | Exhaust, Supply | - | 83 | - | B | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 235 | - | 5.70 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - |
BlauAIR RH 800 | 200-240 | floor mounting, outdoor mounting | - | - | for round air ducts | - | - | aluzinc | yes | yes | yes | - | - | 800 | 50/60 | 2800 | - | - | Supply and exhaust | - | 2x270 | - | - | IP34 | 1 | 34 | - | - | - | - | - | - | - | - | - | B | - | - | - | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | - | - | - | 190 | - | - | ePM1 ≥ 50% (ISO 16890) | F7 (EN 779) | - | - | IP54 | - | - | - | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 | - | - | - | - | - | - | - | - |
VENTO A50 S (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50 S (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-F 40x20 4Е | 230 | Inline | centrifugal | - | for rectangular air ducts | 400 | 200 | galvanized steel | no | no | no | - | 1.32 | 1440 | 50 | 1350 | - | - | Exhaust, Supply | - | 295 | -25...+40 | - | IPX4 | 1 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 400 | - | 17.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 50x25 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | 500 | 250 | galvanized steel | no | no | yes | - | 0.67 | 1490 | 50 | 930 | - | - | Exhaust, Supply | - | 274 | - | - | IPX4 | 3 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+60 | - | - | - | - | - | - | - | - | - | - | - | 414 | - | 40.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX E 400-3.4 Pro | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | 425 | 50 | 2705 | - | - | Supply | - | - | - | A | - | 1 | 29 | - | - | - | - | 3400 | - | - | - | - | - | - | 2 | -25...+40 | 14.8 | - | 150 | - | - | - | G4 | - | - | - | - | 25 mm mineral wool | - | - | - | - | - | - | - | 118 | - | 50 | 2016, 2018 | - | - | - | - | - | - | 98 | - | 0.43 | - | 3498 | 15.23 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 400 4Е 50 Hz |
230 | Inline | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 3580 | 50 | 1380 | - | - | Exhaust, Supply | - | 180 | - | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | 995 | - | 8.1 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 0.82 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 400 4Е 60 Hz |
230 | Inline | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 3890 | 60 | 1655 | - | - | Exhaust, Supply | - | 240 | - | - | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | 1081 | - | 8.1 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 1.08 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE 1000 S21 V.2 | 400 | ceiling mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | 1000 | 50/60 | - | - | - | - | 258 | - | - | A+ | - | 3 | 24 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | -25...+40 | - | - | 315 | - | - | - | - | - | - | - | - | - | 83…93* | - | - | 34 | - | 267 | - | 278 | - | - | - | - | - | - | - | - | - | - | - | 1.85 | - | - | 12 | - | 3150 | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LB 1200 S21 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | 1240 | 50/60 | 3630 | - | - | Supply and exhaust | 394 | - | - | A+ | - | 1 | 24 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | -25...+40 | - | - | 400 | - | - | - | - | - | - | - | - | 40 mm mineral wool | 84...96* | - | - | 34 | - | 350 | - | 344 | - | - | - | - | G4 | G4 + (option: F7) | - | - | - | - | - | 1.6 | - | - | 1.6 | - | - | - | - | - | - | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 500 6Е | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 1.81 | 5680 | 50 | 970 | - | - | Exhaust | 52.8 | 407 | -25…+60 | - | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1578 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 3.05 | 6532 | 60 | 1120 | - | - | Exhaust | 52.8 | 673 | -25…+60 | - | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1814 | - | - | – | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC L2 300-H S2 white | 230 | wall mounting, floor mounting | - | 125 | for round air ducts | - | - | - | yes | no | yes | - | - | 300 | 50/60 | - | - | - | Supply and exhaust | - | 165 | - | B | - | 1 | 33 | - | - | cross-flow | polystyrene | - | - | - | - | - | - | - | - | - | - | 1.3 | - | - | - | - | - | -25...+40 | - | - | - | 20 mm mineral wool | 55...79 | - | - | - | - | - | - | 83 | - | 32 | 2016, 2018 | - | G4 | F8, G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 400х183-5.5-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 11 | 10175 | 50 | 1430 | - | - | Exhaust, Supply | 69.5 | 5500 | +60 | - | IP54 | 3 | 80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2827 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box EC 30x15-1 max | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | 665 | 50/60 | 3500 | - | - | Exhaust, Supply | 6.0 | 101 | - | B | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | - | - | 185 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | 0.80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SB 550 S14 | 230 | wall mounting, floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | 692 | 50/60 | - | - | - | - | - | 350 | - | A+ | - | 1 | 38 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | - | - | - | 200 | - | - | - | - | -25...+40 | - | - | - | 40 mm mineral wool | 85...92 | - | - | - | - | - | - | 192 | - | 82 | 2018 | - | G4 | F7 (option: G4) | - | - | - | - | - | - | - | - | - | 2.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 1500-2 S17 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | 1500 | 50/60 | 2000 | - | - | - | - | - | - | - | - | 1 | 62 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | - | - | 315 | - | - | - | - | -25...+40 | - | - | - | 25 mm mineral wool | 72–95 | - | - | - | - | - | - | 417 | - | 175 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | - | - | 750 | 3.2 | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 222 | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-V ЕС 355 | 230 | Inline | centrifugal | - | for round air ducts | - | - | - | yes | yes | yes | - | 1.1 | - | 50/60 | 1450 | - | - | Exhaust, Supply | 25.0 | 250 | -25 +60 | - | IPX4 | 1 | 44 | 3830 | 3639 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
min | 230 | Inline | mixed-flow | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | 1007 | 50 | 2292 | min | - | Exhaust, Supply | 9.8 | 144 | - | - | IPX4 | 1 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 280 | - | - | 2018 | - | - | - | - | - | IP20 | - | - | - | - | - | - | 0.70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - |
mid | 230 | Inline | mixed-flow | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | 1404 | 50 | 2626 | med | - | Exhaust, Supply | 9.8 | 173 | - | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 390 | - | - | 2018 | - | - | - | - | - | IP20 | - | - | - | - | - | - | 0.81 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - |
max | 230 | Inline | mixed-flow | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | 1670 | 50 | 2876 | max | - | Exhaust, Supply | 9.8 | 188 | - | - | IPX4 | 1 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 464 | - | - | 2018 | - | - | - | - | - | IP20 | - | - | - | - | - | - | 0.84 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - |
KFK 70х40-3 | - | - | - | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QA 315 50 Hz |
220-240 | wall mounting | axial | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1700 | 50 | 1300 | - | - | Exhaust, Supply | - | 110 | -30 … +40 | - | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 472 | - | 5.46 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.75 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QA 315 60 Hz |
220-240 | wall mounting | axial | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1650 | 60 | 1365 | - | - | Exhaust, Supply | - | 104 | -30 … +40 | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 458 | - | 5.46 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX DE 2500-18 Pro | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | no | no | yes | - | - | 2500 | 50 | 2690 | - | - | Supply | - | - | - | - | - | 3 | 54 | - | - | - | - | 18000 | - | - | - | - | - | 1.05 | - | -25...+40 | 26.0 | 27.05 | - | 0.62 | - | 500х300 | G4 | - | - | - | - | 50 mm mineral wool | - | 18620 | - | - | - | - | - | 695 | - | 61 | 2016, 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 630 4Е 50 Hz |
230 | wall mounting | axial | 630 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 11900 | 50 | 1360 | - | - | Exhaust, Supply | - | 750 | - | - | IPX4 | 1 | 67 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | 3306 | - | 20.0 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | 3.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 630 4Е 60 Hz |
230 | wall mounting | axial | 630 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 12100 | 60 | 1625 | - | - | Exhaust, Supply | - | 979 | - | - | IPX4 | 1 | 68 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | 3361 | - | 20.0 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | 4.26 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC MW 1500 S31 | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | yes | no | - | - | - | 1445 | 50 | - | - | - | Supply | - | - | - | - | - | 1 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | -30…+40 | - | - | 500 x 250 | - | - | - | - | - | - | 4 | - | 30 mm mineral wool | - | - | - | - | - | - | - | - | - | 49 | 2018 | - | - | - | - | - | - | - | 222 | - | 1.6 | - | - | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 | 1 |
Clean Box 200 G4-H13 | - | ceiling mounting, wall mounting, flush mounting | - | 200 | for round air ducts | - | - | polymer-coated steel | - | - | - | - | - | - | - | - | - | - | Supply | 10.62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 225 2Е (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.70 | 1010 | 60 | 2820 | - | - | Exhaust | 7 | 169 | -25…+50 | – | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 281 | - | - | – | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 225 2Е (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.54 | 915 | 50 | 2790 | - | - | Exhaust | 7 | 123 | -25…+50 | C | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 254 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 315 max | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 1.44 | 1820 | 50/60 | 2780 | - | - | Exhaust, Supply | - | 183 | - | – | IPX4 | 1 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 506 | - | 9.42 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - |
Iso-B EC 200 | 230 | Inline | centrifugal | 200 | for round air ducts | - | - | galvanized steel | yes | no | yes | - | 0.83 | 700 | 50/60 | 2580 | - | - | Exhaust, Supply | - | 101.6 | - | B | IPX4 | 1 | 37 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | - | - | 194 | - | - | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50-1 S Pro (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50-1 S Pro (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I EC 50x25-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | 1.85 | - | 50/60 | 2500 | - | 1590 | Exhaust, Supply | 25.5 | 252 | -25...+50 | – | IPX4 | 1 | 34 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 442 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 40x20 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 400 | 200 | galvanized steel | no | no | yes | - | 1.32 | 1440 | 50 | 1350 | - | - | Exhaust, Supply | - | 295 | - | - | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | - | 400 | - | 29 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT ERV D 250 S20 | 230 | ceiling mounting | - | - | for round air ducts | - | - | - | no | no | yes | - | - | 370 | 50/60 | 2400 | - | - | Supply and exhaust | - | - | - | E | - | 1 | 52 | - | - | cross-flow | enthalpy | - | - | - | - | - | - | - | - | - | - | 1.1 | 150 | - | - | - | - | -25...+40 | - | - | 22...32 | 5 mm, 10 mm | 66...76 | 250 | - | - | - | - | - | 103 | - | - | 2016 | - | G4 | G4 + F8 (PM2.5 > 93 %) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 250 2Е 50 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1050 | 50 | 2400 | - | - | Exhaust, Supply | - | 80 | - | - | IPX4 | 1 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | 292 | - | 3.9 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 250 2Е 60 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1150 | 60 | 2990 | - | - | Exhaust, Supply | - | 91 | - | - | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | 319 | - | 3.9 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 0.42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE2 300 S21 V.2 | 230 | ceiling mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating, electric reheating | - | 300 | 50/60 | - | - | - | Supply and exhaust | 80 | - | - | A+ | - | 1 | 34 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | -25...+40 | - | - | 200 | - | - | - | - | - | - | - | - | - | 83…92* | - | - | 44 | - | 204 | 700 | 83 | - | - | - | - | - | - | - | - | - | - | - | 1.5 | - | - | 11.7 | - | 1050 | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LBE2 300-E S21 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating, electric reheating | - | 320 | 50/60 | 2150 | - | - | Supply and exhaust | 138±3% | - | - | A | - | 1 | 21 | - | - | counter-flow | enthalpy | - | - | - | - | - | - | - | - | -25...+40 | - | - | 200 | - | - | - | - | - | - | - | - | 40 mm mineral wool | 73...89* | - | - | 31 | - | 125 | 1400 | 89 | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | - | - | 0.9 | - | - | 13.1 | - | 1400 | - | - | - | - | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 355 4Е (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.96 | 2480 | 50 | 1420 | - | - | Exhaust | 28.3 | 219 | -25…+50 | - | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 689 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 355 4Е (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 1.33 | 2976 | 60 | 1580 | - | - | Exhaust | 28.3 | 304 | -25…+50 | - | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 827 | - | - | – | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco Komfort S(3 speed) | 100-240 | wall mounting | - | - | 160 | - | - | - | yes | - | - | - | 0.060 | - | 50/60 | 1900 | - | - | - | - | 5.5 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | - | - | 0.79 | - | - | - | - | - | 14 | 26 | - | - | - | - | - | - | - | - | - | 35 | 26 | G3 (Option: F8 PM2,5 > 99 %*) | up to 95 | 25 | - | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - | - | - | - | - | - | - | - |
Vento Eco Komfort S(1 speed) | 100-240 | wall mounting | - | - | 160 | - | - | - | yes | - | - | - | 0.030 | - | 50/60 | 800 | - | - | - | - | 2.0 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | - | - | 0.96 | - | - | - | - | - | 4 | 4 | - | - | - | - | - | - | - | - | - | 10 | 4 | G3 (Option: F8 PM2,5 > 99 %*) | up to 95 | 8 | - | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - | - | - | - | - | - | - | - |
Vento Eco Komfort S(2 speed) | 100-240 | wall mounting | - | - | 160 | - | - | - | yes | - | - | - | 0.034 | - | 50/60 | 1300 | - | - | - | - | 3.5 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 35 | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | - | - | 0.84 | - | - | - | - | - | 10 | 19 | - | - | - | - | - | - | - | - | - | 27 | 19 | G3 (Option: F8 PM2,5 > 99 %*) | up to 95 | 15 | - | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 450-4D | 400 | Inline | mixed-flow | 450 | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | 3.43 | 6510 | 50 | 1490 | - | - | Exhaust, Supply | 51 | 1230 | - | - | IPX4 | 3 | 59 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | - | - | 1808 | - | - | 2016 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 315х143-4.0-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 8.7 | 6530 | 50 | 1410 | - | - | Exhaust, Supply | 49.8 | 4000 | +60 | - | IP54 | 3 | 79 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1814 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 100x50 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | 10500 | 50 | 900 | - | - | Exhaust, Supply | 120.0 | 1198 | - | - | IPX4 | 3 | 69 | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | 2.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SB 350 S21 | 230 | wall mounting, floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | 450 | 50/60 | - | - | - | - | - | 178 | - | A+ | - | 1 | 28 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | - | - | -25...+40 | - | - | - | 40 mm mineral wool | 85...92 | - | - | - | - | - | - | 125 | - | 64 | 2018 | - | G4 | F7 (option: G4) | - | - | - | - | - | - | - | - | - | 1.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 700-2 S18 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | 700 | 50/60 | 2600 | - | - | - | - | - | - | A | - | 1 | 52 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | - | - | 250 | - | - | - | - | -25...+40 | - | - | - | 20 mm mineral wool | 76–95 | - | - | - | - | - | - | 194 | - | 128 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | - | - | 315 | 1.4 | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 105 | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-V 560 4D | 400 | Inline | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | aluminium, aluzinc | no | yes | yes | - | 5 | - | 50 | 1365 | - | - | Exhaust, Supply | 99 | 2380 | - | - | IPX4 | 3 | 56 | 11340 | 10490 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+60 | - | 2914 | 3150 | - | - | - | - | - | - |
TwinBox EC 315 | 220-240 | Inline | mixed-flow | - | for round air ducts | - | - | galvanized steel | yes | no | yes | - | 1.56 | 2780 | 50/60 | 2474 | - | - | Exhaust | 97 | 355 | –25…+55 | - | IPX4 | 1 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 772 | - | - | 2016, 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KFK 40х20-3 | - | - | - | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 550 4D 50 Hz |
400 | wall mounting | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 9700 | 50 | 1350 | - | - | Exhaust, Supply | - | 750 | - | - | IPX4 | 3 | 64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | 2695 | - | 16.5 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 550 4D 60 Hz |
400 | wall mounting | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 7380 | 60 | 1605 | - | - | Exhaust, Supply | - | 600 | - | - | IPX4 | 3 | 64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | 2050 | - | 16.5 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 1.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-HC EC 225 A | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | aluminium | yes | yes | no | - | 0.80 | 1350 | 50/60 | 2478 | - | - | Exhaust | - | 95 | -25...+60 | – | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 375 | - | 7 | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D350 S18 | 230 | - | - | - | - | - | - | painted steel | - | - | - | - | - | 430 | 50/60 | 3570 | - | - | - | - | - | - | A | - | 1 | 31 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | - | - | 160 | - | - | - | - | -25...+40 | - | - | - | 40 mm mineral wool | 72–87 | - | - | - | - | - | - | 119 | - | 81 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | - | - | 185 | 185 | 1.3 | 1.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AM 200 (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.9 | 1000 | 60 | 2510 | - | - | Exhaust | 8.1 | 205 | -25 +50 | B | IPX4 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 278 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AM 200 (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.67 | 950 | 50 | 2375 | - | - | Exhaust | 8.1 | 154 | -25…+50 | B | IPX4 | - | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 264 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |