Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Current | Maximum air flow | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Number of electrical heating elements | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Filter | Transported air temperature | Number of water coil rows | Insulation | Heat recovery efficiency | Total unit power | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Insulation thikness | Maximum air flow | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Remote control panel | Functions | Power | * | Motor max. power | ** | Max. water temperature | Water coil connection diameter |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
KOMFORT LE 1700-18 | 400 | ceiling mounting, wall mounting, floor mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 1750 | 50/60 | 1100 | - | 77 | - | - | - | - | - | NRVU | - | 3 | 49 | - | - | cross-flow | polystyrene | 18000 | - | - | - | - | - | - | 26 | 30.3 | 315 | - | -25...+40 | - | 25 mm mineral wool | - | 18980 | - | - | - | - | - | 486 | 96 | - | - | G4 | G4 | - | 980 | - | 4.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso 200-4Е | 230 | Inline | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | 0.45 | 850 | 50 | 1300 | - | - | - | Exhaust, Supply | 8.25 | 115 | -25 +40 | – | IPX4 | - | 29.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 236 | - | – | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE 300 S21 V.2 | 230 | ceiling mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | 300 | 50/60 | - | - | - | - | Supply and exhaust | 79 | - | - | A+ | - | 1 | 34 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | -25...+40 | - | - | 200 | - | - | - | - | 83…92* | - | 44 | - | 204 | - | - | 83 | - | - | - | - | - | - | - | - | 1.5 | - | - | 7.7 | - | 1050 | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
VENTO A50-1 (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - |
VENTO A50-1 (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - |
Box-F 40x20 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | 400 | 200 | galvanized steel | no | no | no | - | 0.60 | 1470 | 50 | 1300 | - | - | - | Exhaust, Supply | - | 282 | -25...+45 | - | IPX4 | 3 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 408 | 17.5 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX E 400-5.1 Pro | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | 425 | 50 | 2705 | - | - | - | Supply | - | - | - | A | - | 3 | 29 | - | - | - | - | 5100 | - | - | - | - | 3 | -25...+40 | 7.4 | - | 150 | G4 | - | - | 25 mm mineral wool | - | - | - | - | - | - | - | 118 | 50 | 2016, 2018 | - | - | - | - | 98 | - | 0.43 | - | 5198 | 7.83 | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 450 4Е 50 Hz |
230 | Inline | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 4680 | 50 | 1350 | - | - | - | Exhaust, Supply | - | 250 | - | - | IPX4 | 1 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | 1300 | 9.1 | - | - | - | - | IP24 | - | - | - | - | - | - | 1.2 | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 450 4Е 60 Hz |
230 | Inline | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 4790 | 60 | 1600 | - | - | - | Exhaust, Supply | - | 325 | - | - | IPX4 | 1 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | 1331 | 9.1 | - | - | - | - | IP24 | - | - | - | - | - | - | 1.46 | - | - | - | - | - | - | - | - | - | - | - |
- | 230 | Inline | mixed-flow | 355 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 3.42 | 3340 | 50 | 1480 | - | - | - | - | 22 | 578 | - | - | IPX4 | 1 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | 928 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H EC 190 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 0.77 | 670 | 50/60 | 3520 | - | - | - | Exhaust | - | 102 | -25...+60 | B | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 186 | 8 | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 315 V2 min |
230 | Inline | centrifugal | 315 | for round air ducts | - | - | plastic | no | no | no | - | 0.68 | 758 | - | 1870 | - | - | - | Exhaust, Supply | - | 143 | -25...+55 | - | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 211 | 4.85 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 315 V2 max |
230 | Inline | centrifugal | 315 | for round air ducts | - | - | plastic | no | no | no | - | 0.76 | 1268 | - | 2410 | - | - | - | Exhaust, Supply | - | 173 | -25...+55 | - | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 352 | 4.85 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Primo 400 (min) | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | - | no | no | no | - | - | 2677 | 50 | 1320 | min | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25…+55 | - | - | - | - | - | - | - | - | - | 744 | - | 2018 | - | - | - | IP20 | - | - | - | - | - | - | 0.91 | - | - | - | - | - | 197 | - | - | - | - | - |
Primo 400 (mid) | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | - | no | no | no | - | - | 3136 | 50 | 1390 | mid | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25…+55 | - | - | - | - | - | - | - | - | - | 871 | - | 2018 | - | - | - | IP20 | - | - | - | - | - | - | 0.90 | - | - | - | - | - | 204 | - | - | - | - | - |
Primo 400 (max) | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | - | no | no | no | - | - | 3350 | 50 | 1446 | max | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25…+55 | - | - | - | - | - | - | - | - | - | 931 | - | 2018 | - | - | - | IP20 | - | - | - | - | - | - | 0.98 | - | - | - | - | - | 224 | - | - | - | - | - |
S-Vent 450х203-3.0-8D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 7.8 | 10230 | 50 | 700 | - | - | - | Exhaust, Supply | 77.8 | 3000 | +60 | - | IP54 | 3 | 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2842 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box EC 40x20-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | 810 | 50/60 | 2470 | - | - | - | Exhaust, Supply | 8.3 | 91 | - | B | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | 225 | - | 2018 | - | - | - | IP55 | - | - | - | - | - | - | 0.69 | - | - | - | - | - | - | - | - | - | - | - |
Tower-HC EC 280 A | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | aluminium | yes | yes | no | - | 1.53 | 2400 | 50/60 | 2610 | - | - | - | Exhaust | - | 195 | -25…+60 | – | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 667 | 10 | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 1500-2 S18 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | 1500 | 50/60 | 2000 | - | - | - | - | - | - | - | - | - | 1 | 62 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | 315 | - | -25...+40 | - | 25 mm mineral wool | 72–95 | - | - | - | - | - | - | 417 | 175 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | 750 | 3.2 | - | - | - | - | - | - | - | - | 2 items x 222 | - | - | - |
Iso-V ЕС 400 | 230 | Inline | centrifugal | - | for round air ducts | - | - | - | yes | yes | yes | - | 2.2 | - | 50/60 | 1500 | - | - | - | Exhaust, Supply | 39 | 500 | -25 +50 | - | IPX4 | 1 | 39 | 5660 | 5377 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Clean Box 200 G4-H13 | - | ceiling mounting, wall mounting, flush mounting | - | 200 | for round air ducts | - | - | polymer-coated steel | - | - | - | - | - | - | - | - | - | - | - | Supply | 10.62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QA 250 50 Hz |
220-240 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1070 | 50 | 1300 | - | - | - | Exhaust, Supply | - | 68 | -30 … +40 | - | IPX4 | 1 | 37 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 297 | 4.88 | - | - | - | - | IP44 | - | - | - | - | - | - | 0.48 | - | - | - | - | - | - | - | - | - | - | - |
Axis-QA 250 60 Hz |
220-240 | wall mounting | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1050 | 60 | 1450 | - | - | - | Exhaust, Supply | - | 76 | -30 … +40 | - | IPX4 | 1 | 37 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 292 | 4.88 | - | - | - | - | IP44 | - | - | - | - | - | - | 0.51 | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 40x20 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 400 | 200 | galvanized steel | no | no | yes | - | 1.32 | 1440 | 50 | 1350 | - | - | - | Exhaust, Supply | - | 295 | - | - | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | 400 | 29 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Helix 160х90 2E | 230 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | - | no | yes | no | - | 1.48 | - | 50 | 2745 | - | - | 730 | Exhaust, Supply | 5.1 | 320 | -25 +45 | C | IPX4 | - | 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/80x5 V3(1 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.32 | - | 50 | 1400 | - | - | 97 | Exhaust, Supply | 3.7 | 20 | 50 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/80x5 V3(2 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.34 | - | 50 | 1800 | - | - | 138 | Exhaust, Supply | 3.7 | 26 | 50 | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/80x5 V3(3 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.4 | - | 50 | 2600 | - | - | 176 | Exhaust, Supply | 3.7 | 45 | 50 | C | IPX4 | - | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC MW 1000 S31 | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | yes | no | - | - | - | 920 | 50 | - | - | - | - | Supply | - | - | - | - | - | 1 | 48 | - | - | - | - | - | - | - | - | - | - | -30…+40 | - | - | 400 x 200 | - | - | 4 | 30 mm mineral wool | - | - | - | - | - | - | - | - | 35 | 2018 | - | - | - | - | - | 165 | - | 1.23 | - | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | 150 | 1 |
KOMFORT LE 500-3 | 230 | ceiling mounting, wall mounting, floor mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 500 | 50/60 | 1100 | - | 88 | - | - | - | - | - | E | - | 1 | 24-47 | - | - | cross-flow | polystyrene | 3000 | - | - | - | - | - | - | 13 | 14.32 | 150 | - | -25...+40 | - | 25 mm mineral wool | - | 3300 | - | - | - | - | - | 139 | 49 | 2016 | - | G4 | G4 | - | 300 | - | 1.32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix 315 min | 230 | Inline | mixed-flow | - | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | 0.93 | 1510 | 50/60 | 2120 | min | - | - | Exhaust, Supply | 25 | 230 | +60 | - | IPX4 | 1 | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 419 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix 315 max | 230 | Inline | mixed-flow | - | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | 1.41 | 1920 | 50/60 | 2620 | max | - | - | Exhaust, Supply | 25 | 330 | +60 | - | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 533 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Freshbox 100 Speed I |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 30 | 50/60 | 2200 | I | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | - | 100 | - | -20...+40 | - | - | 98 | - | - | - | - | - | 10 | 8 | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | 12 | - | 0.4 | - | - | - | - | - | 13 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Freshbox 100 Speed II |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 60 | 50/60 | 2200 | II | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | - | 100 | - | -20...+40 | - | - | 92 | - | - | - | - | - | 10 | 17 | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | 21 | - | 0.4 | - | - | - | - | - | 27 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Freshbox 100 Speed III |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 100 | 50/60 | 2200 | III | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | - | 100 | - | -20...+40 | - | - | 89 | - | - | - | - | - | 10 | 28 | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | 45 | - | 0.4 | - | - | - | - | - | 39 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |