Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heat exchanger | Heating | Current | Maximum air flow | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Insulation class | Number of electrical heating elements | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Air flow in ventilation mode | Air flow in heat recovery mode | Connected air duct size | Filter | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Insulation | Heat recovery efficiency | Total unit power | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air flow in ventilation mode | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Air flow in heat recovery mode | Air flow in heat recovery mode | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8 | * | ** | *** | Transported air temperature | Perm. amb. temp. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Clean Box 150 G4-H13-Carbon | - | ceiling mounting, wall mounting, flush mounting | - | 150 | for round air ducts | polymer-coated steel | - | - | - | - | - | - | - | - | - | - | - | - | Supply | 9.04 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 710 6D | 400 | wall mounting | axial | 710 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 15440 | 50 | 830 | - | - | - | Exhaust, Supply | - | 1150 | - | - | IPX4 | 3 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | 4289 | - | 31.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | 2.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco2 A50-4 S11 Pro (1 speed) | - | - | - | - | 160 | - | - | - | - | - | - | 0.033 | - | 50/60 | 915 | I | - | - | - | - | 2.37 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | - | - | - | -20(-30**) … +40 | 41 | - | - | - | - | - | 100-240 | - | - | - | 0.57 | - | - | - | - | - | 4 | - | - | - | - | - | - | - | - | - | 21 | 12 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 15 | 4 | Sensor | Filter replacement indication, Timer | D1 | S3*** | Maximum air flow 40 m³/h | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - |
Vento Eco2 A50-4 S11 Pro (2 speed) | - | - | - | - | 160 | - | - | - | - | - | - | 0.047 | - | 50/60 | 1555 | II | - | - | - | - | 3.80 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | - | - | -20(-30**) … +40 | 41 | - | - | - | - | - | 100-240 | - | - | - | 0.46 | - | - | - | - | - | 8 | - | - | - | - | - | - | - | - | - | 27 | 18 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 30 | 8 | Sensor | Filter replacement indication, Timer | D1 | S3*** | Maximum air flow 40 m³/h | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - |
Vento Eco2 A50-4 S11 Pro (3 speed) | - | - | - | - | 160 | - | - | - | - | - | - | 0.080 | - | 50/60 | 2330 | III | - | - | - | - | 7.61 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | -20(-30**) … +40 | 41 | - | - | - | - | - | 100-240 | - | - | - | 0.55 | - | - | - | - | - | 14 | - | - | - | - | - | - | - | - | - | 29 | 20 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 50 | 14 | Sensor | Filter replacement indication, Timer | D1 | S3*** | Maximum air flow 40 m³/h | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - |
Tower-AM 315 | 230 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 1.34 | 1880 | 50 | 2720 | - | - | - | Exhaust | 12.3 | 296 | -25…+45 | - | IPX4 | - | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 522 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x6 V3(1 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | polymer-coated steel | no | no | no | - | - | 0.32 | - | 50 | 1400 | - | - | 88 | Exhaust, Supply | 3.6 | 20 | 50 | C | IPX4 | - | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x6 V3(2 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | polymer-coated steel | no | no | no | - | - | 0.34 | - | 50 | 1800 | - | - | 130 | Exhaust, Supply | 3.6 | 26 | 50 | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x6 V3(3 speed) | 230 | Inline | centrifugal | 80 | for round air ducts | polymer-coated steel | no | no | no | - | - | 0.4 | - | 50 | 2600 | - | - | 162 | Exhaust, Supply | 3.6 | 45 | 50 | C | IPX4 | - | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC ME 3000-27 S31 | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | aluzinc | yes | no | - | - | - | - | 3150 | 50 | - | - | - | - | Supply | - | - | - | - | - | 3 | 47 | - | - | 27000 | - | - | - | - | - | - | -30…+40 | - | - | 600 x 300 | - | - | - | - | - | - | - | 30 mm mineral wool | - | - | - | - | - | - | - | - | 50 | 2018 | - | - | - | - | - | - | 472 | 2.1 | - | 27472 | 44 | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT L 350 | 230 | ceiling mounting, wall mounting, floor mounting | - | - | for round air ducts | aluzinc | no | no | yes | - | - | - | 350 | 50/60 | 1150 | - | 78 | - | Supply and exhaust | - | - | - | E | - | 1 | 24-45 | cross-flow | polystyrene | - | - | - | - | - | - | - | - | - | 1.2 | 125 | - | - | - | - | -25...+40 | - | - | 25 mm mineral wool | - | 260 | - | - | - | - | 97 | - | 45 | 2016 | - | G4 | G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix 150 min | 230 | Inline | mixed-flow | - | for round air ducts | polymer-coated steel | no | no | yes | - | - | 0.20 | 410 | 50/60 | 1985 | min | - | - | Exhaust, Supply | 6.1 | 45 | +60 | C | IPX4 | 1 | 26 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 114 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix 150 max | 230 | Inline | mixed-flow | - | for round air ducts | polymer-coated steel | no | no | yes | - | - | 0.23 | 550 | 50/60 | 2640 | max | - | - | Exhaust, Supply | 6.1 | 52 | +60 | C | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 153 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX DW 1200-4 Pro | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | aluzinc | no | no | yes | - | - | - | 1200 | 50 | 2700 | - | - | - | Supply | - | - | - | - | - | 3 | 51 | - | - | - | - | - | - | - | - | - | -25...+40 | - | 0.55 | - | - | - | 400х200 | - | - | - | 4 | 50 mm mineral wool | - | 320 | - | - | - | - | 333 | - | 57 | 2016, 2018 | - | - | G4 (Option: F7) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 250 4D 50 Hz |
400 | wall mounting | axial | 250 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 850 | 50 | 1400 | - | - | - | Exhaust, Supply | - | 60 | - | - | IPX4 | 3 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | 236 | - | 3.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | 0.17 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 250 4D 60 Hz |
400 | wall mounting | axial | 250 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 885 | 60 | 1750 | - | - | - | Exhaust, Supply | - | 89 | - | - | IPX4 | 3 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | 246 | - | 3.5 | - | - | - | - | - | - | IP44 | - | - | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR RH 5000 | 380-480 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | aluzinc | yes | yes | yes | - | - | - | 5000 | 50/60 | 1350 | - | - | - | Supply and exhaust | - | 2x1410 | - | - | IP34 | 3 | 32 | - | - | - | - | - | - | - | B | - | - | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | - | 559 | - | - | ePM1 ≥ 50% (ISO 16890) | F7 (EN 779) | - | - | IP54 | - | - | 3.95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
Tower-V 310 4D (60 Hz) | 400 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.32 | 2442 | 60 | 1550 | - | - | - | Exhaust | 19 | 202 | -25…+50 | - | IPX4 | 3 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 678 | - | - | – | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 310 4D (50 Hz) | 400 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.29 | 2300 | 50 | 1410 | - | - | - | Exhaust | 19 | 155 | -25…+50 | - | IPX4 | 3 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 639 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M EC 160 | 230 | Inline | centrifugal | 160 | for round air ducts | polymer-coated steel | yes | no | no | - | - | 0.90 | 785 | 50/60 | 3030 | - | - | - | Exhaust, Supply | - | 108 | - | B | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 218 | - | 4.90 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - |
CIVIC EC LBE 500 S21 V.2 | 230 | floor mounting | - | - | - | polymer-coated steel | yes | - | - | - | electric preheating | - | 580 | 50/60 | - | - | - | - | Supply and exhaust | 140 | - | - | A | - | 1 | 38 | counter-flow | polystyrene | - | - | - | - | - | - | - | -25...+40 | - | - | 250 | - | - | - | - | - | - | - | 40 mm mineral wool | 75...94* | - | 47 | - | 370 | - | 161 | - | - | - | - | - | - | - | - | - | - | 2.5 | - | - | 9.1 | - | 1050 | - | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
VENTO A50-1 Pro (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - |
VENTO A50-1 Pro (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - |
Box-I EC 40x20-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | galvanized steel | yes | no | yes | - | - | 0.69 | - | 50/60 | 2470 | - | - | 810 | Exhaust, Supply | 15.1 | 91 | -25...+50 | B | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 225 | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco Standard S Pro (1 speed) | 100-240 | wall mounting | - | - | 160 | - | yes | - | - | - | - | 0.017 | - | 50/60 | 915 | - | - | - | - | - | 1.00 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | - | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | 0.48 | - | - | - | - | - | 4 | 2 | - | - | - | - | - | - | - | - | 21 | 12 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 8 | - | Sensor | - | D1 | S3*** | Maximum air flow 40 m³/h | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - |
Vento Eco Standard S Pro (2 speed) | 100-240 | wall mounting | - | - | 160 | - | yes | - | - | - | - | 0.025 | - | 50/60 | 1555 | - | - | - | - | - | 2.10 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | 0.50 | - | - | - | - | - | 8 | 4 | - | - | - | - | - | - | - | - | 27 | 18 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 15 | - | Sensor | - | D1 | S3*** | Maximum air flow 40 m³/h | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - |
Vento Eco Standard S Pro (3 speed) | 100-240 | wall mounting | - | - | 160 | - | yes | - | - | - | - | 0.041 | - | 50/60 | 2330 | - | - | - | - | - | 4.30 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | - | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | 0.62 | - | - | - | - | - | 14 | 7 | - | - | - | - | - | - | - | - | 29 | 20 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 25 | - | Sensor | - | D1 | S3*** | Maximum air flow 40 m³/h | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - |
BLAUBOX E 200-1.8 Pro | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | aluzinc | no | no | yes | - | - | - | 190 | 50 | 2830 | - | - | - | Supply | - | - | - | A | - | 1 | 27 | - | - | 1800 | - | - | - | - | - | 3 | -25...+40 | 7.8 | - | 100 | - | - | - | G4 | - | - | - | 25 mm mineral wool | - | - | - | - | - | - | 53 | - | 50 | 2016, 2018 | - | - | - | - | - | - | 73 | 0.32 | - | 1873 | 8.12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 300 2Е 50 Hz |
230 | Inline | axial | 300 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 2230 | 50 | 2300 | - | - | - | Exhaust, Supply | - | 145 | - | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | 619 | - | 6.2 | - | - | - | - | - | - | IP24 | - | - | - | - | - | 0.66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 300 2Е 60 Hz |
230 | Inline | axial | 300 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 2280 | 60 | 2410 | - | - | - | Exhaust, Supply | - | 178 | - | - | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | 633 | - | 6.2 | - | - | - | - | - | - | IP24 | - | - | - | - | - | 0.79 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 400 (50 Hz) |
230 | Inline | centrifugal | 400 | for round air ducts | aluzinc | no | no | yes | - | - | 1.87 | 3800 | 50 | 1451 | - | - | - | Exhaust, Supply | - | 427 | - | - | IPX4 | 1 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - | 1056 | - | 78.5 | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 400 (60 Hz) |
230 | Inline | centrifugal | 400 | for round air ducts | aluzinc | no | no | yes | - | - | 2.91 | 4100 | 60 | 1711 | - | - | - | Exhaust, Supply | - | 663 | - | - | IPX4 | 1 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | - | 1139 | - | 78.5 | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 400 4Е | 230 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 2.00 | 3950 | 50 | 1400 | - | - | - | Exhaust | 35 | 457 | -30…+60 | - | IPX4 | 1 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1097 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 150 60 Hz | 230 | Inline | centrifugal | 150 | for round air ducts | plastic | no | no | no | - | - | 0.33 | 505 | 60 | 2940 | - | - | - | Exhaust, Supply | - | 73 | -25...+50 | – | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 140 | - | 2.45 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 150 50 Hz | 230 | Inline | centrifugal | 150 | for round air ducts | plastic | no | no | no | - | - | 0.29 | 460 | 50 | 2628 | - | - | - | Exhaust, Supply | - | 65 | -25...+55 | B | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 128 | - | 2.45 | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco A30-4 S Pro (1 Speed) |
100-240 | wall mounting | - | - | 100 | - | yes | - | - | - | - | 0.021 | - | 50/60 | 1600 | I | - | - | - | - | 1.03 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 | 5 | - | - | -20...+40 | 42 | - | - | ≤81 | - | - | - | - | - | - | 0.74 | - | - | - | - | - | 3 | 1 | - | - | - | - | - | - | - | - | 30 | 21 | - | - | - | - | Sensor | Filter replacement indication, Timer, External sensor connection | D1 | - | - | - | - | - | - |
Vento Eco A30-4 S Pro (2 Speed) |
100-240 | wall mounting | - | - | 100 | - | yes | - | - | - | - | 0.027 | - | 50/60 | 2200 | II | - | - | - | - | 1.96 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 20 | 10 | - | - | -20...+40 | 42 | - | - | ≤81 | - | - | - | - | - | - | 0.71 | - | - | - | - | - | 6 | 3 | - | - | - | - | - | - | - | - | 37 | 28 | - | - | - | - | Sensor | Filter replacement indication, Timer, External sensor connection | D1 | - | - | - | - | - | - |
Vento Eco A30-4 S Pro (3 Speed) |
100-240 | wall mounting | - | - | 100 | - | yes | - | - | - | - | 0.038 | - | 50/60 | 2500 | III | - | - | - | - | 3.47 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | 15 | - | - | -20...+40 | 42 | - | - | ≤81 | - | - | - | - | - | - | 0.83 | - | - | - | - | - | 8 | 4 | - | - | - | - | - | - | - | - | 40 | 31 | - | - | - | - | Sensor | Filter replacement indication, Timer, External sensor connection | D1 | - | - | - | - | - | - |
S-Vent 355x143-4.0-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | polymer-coated steel | no | yes | no | - | - | 8.7 | 8150 | 50 | 1410 | - | - | - | Exhaust, Supply | 51 | 4000 | +60 | - | IP54 | 3 | 79 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2264 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 70x40 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | galvanized steel | - | - | - | - | - | 1.62 | 5580 | 50 | 1418 | - | - | - | Exhaust, Supply | 41.0 | 828 | - | - | IPX4 | 3 | 57 | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |