Blauberg Box-F 80x50 6D
- Capacity diagram
- Designation key
- Additional characteristics
Supply and extract ventilation systems installed in various premises. Compatible with 400x200 up to 1000x500 mm rectangular air ducts.
Four- or six-pole asynchronous motor with external rotor and centrifugal impeller with forward curved blades. Due to its impeller design the fan has excellent air dynamic charakteristics (high performance and pressure drop). Single-phase (E) or three-phase (D) motor modifications. Equipped with ball bearings for longer service life. Dynamically balanced impeller. Overheating protection by built-in thermal switches with leaded outside terminals for connection to external protecting controls. The thermal switch terminal leads are designed for connection to respective circuit ot the overload relay or respective terminals of the autotransformer or thyristor speed controller.
Atmospheric resistant galvanized steel casing and impeller. The fan is rated for continuous operation. Fitted with standard 20 mm connecting flanges for connection to rectangular air ducts. Access cover on the casing for inspection and maintenance operations. The fans with standard size from 40x20 up to 60x35 are equipped with a terminal block integrated into the casing with leaded outside sealed electrical lead-in for connection to power mains. The fans with standard size from 70x40 up to 100x50 are equipped with an external terminal block for connection to power mains.
The fan is designed for mounting inside rectangular air ducts and can be installed in any position. The fan flanges are connected to the air ducts through the bolts inserted into the flange holes. Mounting to a round air duct on exhaust flange through a round pipe reducer. Available upon order. If flexible vibration-absorbing connectors are used to connect the fan to the air ducts provide their fixation to mounting structures with supports or brackets. While mounting provide enough space for accessing the cover for service operations.
Smooth speed control with an external thyristor controller or step speed control with an external auto transformer (both available upon separate order).
|Parameter||Box-F 80x50 6D||Measurement unit|
|Maximum air flow||2114||l/s|
|Maximum air flow||7610||m³/h|
|Sound pressure level at 3 m||59||dBА|
|Max. operating temperature||-20...+50||°С|
|Motor IP rating||IP44||-|
|Ingress protection rating||IPX4||-|
|Casing material||galvanized steel||-|
|Air duct||for rectangular air ducts||-|
- Selection method:
- Air capacity:
- Air capacity: --
- Pressure: ---
|Series||Flange size (width x height) [cm]||Motor
Number of poles
|Box-F||40x20; 50x25; 50x30; 60x30; 60x35; 70x40; 80x50; 90x50; 100x50||4; 6||E: single-phase
|Model||Overall dimensions [mm]|
|Box-F 80х50 6D||800||820||840||500||520||540||580||820|
|Sound power level, A-weighted||Octave frequency bands [Hz]|
|LwA to inlet [dBA]||86||75||78||80||74||80||78||74||71||66||76|
|LwA to outlet [dBA]||90||71||76||75||81||85||84||79||77||69||79|
|LwA to environment [dBA]||80||65||73||72||70||75||71||65||64||59||69|