Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Length | Current | Maximum air flow | Frequency | RPM | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Transported air temperature | Electric heater current | Connected air duct diameter | Air flow in ventilation mode | Air flow in heat recovery mode | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Insulation | Heat recovery efficiency | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Max. current consumption with an electric heater | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air flow in ventilation mode | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Air flow in heat recovery mode | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8 | * | Motor max. power | ** | *** | Transported air temperature | Max. air flow at air flow direction (direct air flow) | Max. air flow at air flow direction (perpendicular air flow) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Box-R 100 V3(1 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | polymer-coated steel | no | no | no | - | - | 0.32 | - | 50 | 1400 | 97 | Exhaust, Supply | 3.2 | 20 | 50 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100 V3(2 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | polymer-coated steel | no | no | no | - | - | 0.34 | - | 50 | 1800 | 138 | Exhaust, Supply | 3.2 | 26 | 50 | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100 V3(3 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | polymer-coated steel | no | no | no | - | - | 0.4 | - | 50 | 2600 | 176 | Exhaust, Supply | 3.2 | 45 | 50 | C | IPX4 | - | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 710 6D | 400 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 4.87 | 17010 | 50 | 945 | - | Exhaust | 114 | 2583 | -25…+70 | - | IPX4 | 3 | 67 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4725 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 355 | 230 | Inline | centrifugal | 355 | for round air ducts | polymer-coated steel | yes | no | no | - | - | 3.07 | 3450 | 50/60 | 2768 | - | Exhaust, Supply | - | 693 | - | – | IPX4 | 1 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 958 | - | 15.8 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - |
Iso-B EC 150 | 230 | Inline | centrifugal | 150 | for round air ducts | galvanized steel | yes | no | yes | - | - | 0.77 | 425 | 50/60 | 3200 | - | Exhaust, Supply | - | 94.8 | - | B | IPX4 | 1 | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | 118 | - | - | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO V50-1 Pro (1 speed) | 220-240 | wall mounting | - | - | 164x164 | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 19 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - |
VENTO V50-1 Pro (2 speed) | 220-240 | wall mounting | - | - | 164x164 | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 19 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - | - |
Box-I EC 50x30-1 max | 230 | Inline | centrifugal | - | for rectangular air ducts | galvanized steel | yes | no | yes | - | - | 4.20 | - | 50/60 | 3100 | 2700 | Exhaust, Supply | 29.0 | 553 | -25...+50 | – | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 750 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Expert A50-1 S Pro (1 speed) |
100-240 | - | - | - | 160 | - | yes | - | - | - | - | 0.025 | - | 50/60 | 800 | - | - | - | 3.61 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | 8 | -20…+40 | 42 | - | - | - | - | - | - | - | - | - | 1.73 | - | - | - | - | - | 4 | 2 | - | - | - | - | - | - | - | - | - | 20 | 11 | G3 (Option: F7 PM2,5 > 99 %*) | up to 93 | - | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D1 | - | Maximum air flow 40 m³/h | - | - | - | - | - | - |
Vento Expert A50-1 S Pro (2 speed) |
100-240 | - | - | - | 160 | - | yes | - | - | - | - | 0.03 | - | 50/60 | 1300 | - | - | - | 4.15 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | 15 | -20…+40 | 42 | - | - | - | - | - | - | - | - | - | 1.00 | - | - | - | - | - | 8 | 4 | - | - | - | - | - | - | - | - | - | 27 | 18 | G3 (Option: F7 PM2,5 > 99 %*) | up to 93 | - | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D1 | - | Maximum air flow 40 m³/h | - | - | - | - | - | - |
Vento Expert A50-1 S Pro (3 speed) |
100-240 | - | - | - | 160 | - | yes | - | - | - | - | 0.039 | - | 50/60 | 1900 | - | - | - | 5.20 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | 25 | -20…+40 | 42 | - | - | - | - | - | - | - | - | - | 0.75 | - | - | - | - | - | 14 | 7 | - | - | - | - | - | - | - | - | - | 30 | 21 | G3 (Option: F7 PM2,5 > 99 %*) | up to 93 | - | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D1 | - | Maximum air flow 40 m³/h | - | - | - | - | - | - |
KOMFORT EC DW 3800-2 R | 400 | ceiling mounting | - | - | - | aluzinc | yes | - | - | - | - | - | 3800 | 50/60 | 2580 | - | - | - | 1990 | - | NRVU | - | 3 | 59 | - | - | cross-flow | aluminum | - | - | - | - | - | - | - | 400 | - | - | -25…+40 | - | 2 | 25 mm mineral wool | 75 | - | - | - | - | - | 1056 | - | 295 | 2016 | - | G4 | G4 | - | - | - | - | - | - | - | - | - | 3.40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tubo-MZ 200 [50 Hz] | 220-240 | Inline | axial | 200 | for round air ducts | galvanized steel | - | no | no | - | - | 0.23 | 390 | 50 | 1410 | - | Supply and exhaust | 2.54 | 33 | -30 … +40 | – | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 108 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tubo-MZ 200 [60 Hz] | 220-240 | Inline | axial | 200 | for round air ducts | galvanized steel | - | no | no | - | - | 0.23 | 450 | 60 | 1654 | - | Supply and exhaust | 2.54 | 36 | -30 … +40 | – | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 125 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DB 300 S21 V.2 | 230 | ceiling mounting, wall mounting | - | - | - | polymer-coated steel | yes | - | - | without heating | - | - | 300 | 50/60 | - | - | Supply and exhaust | 78 | - | - | A+ | - | 1 | 34 | - | - | counter-flow | polystyrene | - | - | - | - | - | -25...+40 | - | 200 | - | - | - | - | - | - | 83…92* | 44 | - | 204 | - | - | 83 | - | - | - | - | - | - | - | - | - | - | - | 1.5 | - | - | - | - | - | - | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - |
CIVIC EC LB 300-E S14 | 230 | floor mounting | - | - | - | polymer-coated steel | yes | - | - | without heating | - | - | 320 | 50/60 | 2150 | - | Supply and exhaust | 136±3% | - | - | A | - | 1 | 21 | - | - | counter-flow | enthalpy | - | - | - | - | - | -25...+40 | - | 200 | - | - | - | - | - | 40 mm mineral wool | 73...89* | 31 | - | 125 | - | - | 89 | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | - | - | 0.9 | - | - | 0.9 | - | - | - | - | - | - | - | Sensor | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - |
Tower-H 310 4E (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.64 | 2265 | 50 | 1420 | - | Exhaust | 14.2 | 141 | -25…+50 | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 629 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 310 4E (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.87 | 2425 | 60 | 1740 | - | Exhaust | 14.2 | 195 | -25…+50 | - | IPX4 | 1 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 674 | - | - | – | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco Standard S Pro (1 speed) | 100-240 | wall mounting | - | - | 160 | - | yes | - | - | - | - | 0.017 | - | 50/60 | 915 | - | - | - | 1.00 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | 0.48 | - | - | - | - | - | 4 | 2 | - | - | - | - | - | - | - | - | - | 21 | 12 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 8 | Sensor | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - |
Vento Eco Standard S Pro (2 speed) | 100-240 | wall mounting | - | - | 160 | - | yes | - | - | - | - | 0.025 | - | 50/60 | 1555 | - | - | - | 2.10 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | 0.50 | - | - | - | - | - | 8 | 4 | - | - | - | - | - | - | - | - | - | 27 | 18 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 15 | Sensor | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - |
Vento Eco Standard S Pro (3 speed) | 100-240 | wall mounting | - | - | 160 | - | yes | - | - | - | - | 0.041 | - | 50/60 | 2330 | - | - | - | 4.30 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | -20 (-30**)…+40 | 41 | - | - | - | - | - | - | - | - | - | 0.62 | - | - | - | - | - | 14 | 7 | - | - | - | - | - | - | - | - | - | 29 | 20 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 25 | Sensor | - | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - | - | - |
- | 400 | Inline | mixed-flow | 400 | for round air ducts | polymer-coated steel | no | no | yes | - | - | 1.78 | 3670 | 50 | 1490 | - | Exhaust, Supply | 35 | 590 | - | - | IPX4 | 3 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | 1020 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 280х127-5.5-2D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | polymer-coated steel | no | yes | no | - | - | 10.7 | 6330 | 50 | 2865 | - | Exhaust, Supply | 42.4 | 5500 | +60 | - | IP54 | 3 | 81 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1758 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 50x25 2E 50 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | galvanized steel | - | - | - | - | - | 1.32 | 1720 | 50 | 2550 | - | Exhaust, Supply | 17.88 | 305 | - | - | IPX4 | 1 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+45 | - | - | - | - | - | - | - | - | - | 478 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 50x25 2E 60 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | galvanized steel | - | - | - | - | - | 1.65 | 1850 | 60 | 2830 | - | Exhaust, Supply | 17.88 | 380 | - | - | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+45 | - | - | - | - | - | - | - | - | - | 514 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SBE 250 S21 | 230 | wall mounting, floor mounting | - | - | - | polymer-coated steel | yes | - | - | - | - | - | 390 | 50/60 | - | - | - | - | 180 | - | A+ | - | 1 | 35 | - | - | counter-flow | polystyrene | 1400 | - | - | - | - | - | 6.09 | 160 | - | - | -25...+40 | - | - | 30 mm mineral wool | 88...95 | - | - | - | - | 7.46 | 108 | - | 66 | 2018 | - | G4 | G4 (Option: F7) | - | - | - | - | - | - | - | 1580 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 400-2 S18 | 230 | - | - | - | - | aluzinc | - | - | - | - | - | - | 400 | 50/60 | 3100 | - | - | - | - | - | A | - | 1 | 45 | - | - | rotary | aluminum | - | - | - | - | - | - | - | 160 | - | - | -25...+40 | - | - | 20 mm mineral wool | 80–95 | - | - | - | - | - | 111 | - | 112 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | - | - | 290 | 1.2 | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 100 | - | - | - | - | - |
Iso-V 500 4Е | 230 | Inline | centrifugal | - | for rectangular air ducts, for round air ducts | aluminium, aluzinc | no | yes | yes | - | - | 5.70 | - | 50 | 1320 | - | Exhaust, Supply | 52 | 1300 | - | - | IPX4 | 1 | 55 | 7330 | 6680 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+50 | 1856 | 2036 |
TwinBox EC 150 | 220-240 | Inline | mixed-flow | - | for round air ducts | galvanized steel | yes | no | yes | - | - | 0.48 | 450 | 50/60 | 3390 | - | Exhaust | 28 | 56 | –25…+55 | - | IPX4 | 1 | 37.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | 125 | - | - | 2016, 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
SD 160/900 | - | - | - | 160 | for round air ducts | galvanized steel | - | - | - | - | 900 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 450 4D 50 Hz |
400 | wall mounting | axial | 450 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 5280 | 50 | 1360 | - | Exhaust, Supply | - | 250 | - | - | IPX4 | 3 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | 1467 | - | 10.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 450 4D 60 Hz |
400 | wall mounting | axial | 450 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 5350 | 60 | 1620 | - | Exhaust, Supply | - | 275 | - | - | IPX4 | 3 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | 1486 | - | 10.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-HC EC 190 A | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | aluminium | yes | yes | no | - | - | 0.87 | 770 | 50/60 | 3538 | - | Exhaust | - | 110 | -25...+60 | – | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 214 | - | 7 | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D2E350 S18 | 230 | - | - | - | - | painted steel | - | - | - | - | - | - | 400 | 50/60 | 3200 | - | - | - | - | - | A | - | 1 | 33 | - | - | rotary | aluminum | - | - | - | - | - | - | 5.6 | 160 | - | - | -25...+40 | - | - | 20 mm mineral wool | 73–87 | - | - | - | 1400 | - | 111 | - | 79 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | - | - | 200 | 1600 | 1.3 | 6.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AL 315 (60 Hz) | 230 | for roof | axial | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.7 | 1650 | 60 | 1365 | - | Exhaust | 11.5 | 104 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 458 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AL 315 (50 Hz) | 230 | for roof | axial | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.75 | 1700 | 50 | 1300 | - | Exhaust | 11.5 | 110 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 472 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |