Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Current | Power | Maximum air flow | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Transported air temperature | Number of water coil rows | Insulation | Heat recovery efficiency | Total unit power | Voltage | Reheater power consumption | Insulation thikness | Maximum air flow | Weight | ErP | Maximum air flow | Maximum air flow | Extract filter | Supply filter | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Remote control panel | Functions | * | Motor max. power | ** | Max. water temperature | Water coil connection diameter |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tower-H EC 630 | 400 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 4.66 | - | 18270 | 50/60 | 1450 | - | - | - | Exhaust | - | 2973 | -25...+55 | – | IPX4 | 3 | 71 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5075 | 101 | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M 100 (60 Hz) | 220-240 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.36 | - | 278 | 60 | 3320 | - | - | - | Exhaust, Supply | - | 82 | - | – | IPX4 | 1 | 41 | - | - | - | - | - | - | - | - | - | -25...+45 | - | - | - | - | - | - | - | 77 | 2.4 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M 100 (50 Hz) | 220-240 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.28 | - | 279 | 50 | 2840 | - | - | - | Exhaust, Supply | - | 60 | - | C | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | -25…+45 | - | - | - | - | - | - | - | 78 | 2.4 | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Primo 400 (220/60) (min) |
230 | Inline | mixed-flow | 400 | for round air ducts | - | - | polymer | no | no | no | - | - | 146 | 1846 | 60 | 1000 | min | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 38 | - | - | - | - | - | - | - | - | - | -25…+55 | - | - | - | - | - | - | - | 513 | - | 2018 | - | - | - | - | IP20 | - | - | - | - | - | - | 0.73 | - | - | - | - | - | - | - | - | - | - |
Primo 400 (220/60) (mid) |
230 | Inline | mixed-flow | 400 | for round air ducts | - | - | polymer | no | no | no | - | - | 208 | 2401 | 60 | 1320 | mid | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | -25…+55 | - | - | - | - | - | - | - | 667 | - | 2018 | - | - | - | - | IP20 | - | - | - | - | - | - | 1.00 | - | - | - | - | - | - | - | - | - | - |
Primo 400 (220/60) (max) |
230 | Inline | mixed-flow | 400 | for round air ducts | - | - | polymer | no | no | no | - | - | 300 | 3390 | 60 | 1566 | max | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | -25…+55 | - | - | - | - | - | - | - | 942 | - | 2018 | - | - | - | - | IP20 | - | - | - | - | - | - | 1.40 | - | - | - | - | - | - | - | - | - | - |
S-Vent 450х203-11.0-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 24 | - | 19000 | 50 | 1450 | - | - | - | Exhaust, Supply | 105 | 11000 | +60 | - | IP54 | 3 | 84 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5278 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box EC 50x25-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | - | 1590 | 50/60 | 2500 | - | - | - | Exhaust, Supply | 15.7 | 252 | - | – | IPX4 | - | 45 | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | 442 | - | 2018 | 1590 | 442 | - | - | IP54 | - | - | - | - | - | - | 1.85 | - | - | - | - | - | - | - | - | - | - |
Tower-HC EC 310 A | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | aluminium | yes | yes | no | - | 1.79 | - | 2700 | 50/60 | 2600 | - | - | - | Exhaust | - | 408 | -25…+60 | – | IPX4 | 1 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 750 | 12 | 2018 | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 2000-2 S18 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | 2250 | 50/60 | 3000 | - | - | - | - | - | - | - | - | - | 1 | 64 | - | - | rotary | aluminum | - | - | - | - | - | -25...+40 | - | 25 mm mineral wool | 68–93 | - | - | - | - | 625 | - | 2016, 2018 | - | - | G4 | G4 | - | - | - | - | - | 1070 | 5 | - | - | - | - | - | - | - | 2 items x 448 | - | - | - |
Iso-V ЕС 500 | 400 | Inline | centrifugal | - | for round air ducts | - | - | - | yes | yes | yes | - | 2.1 | - | - | 50/60 | 1350 | - | - | - | Exhaust, Supply | 43.0 | 1320 | -25 +50 | - | IPX4 | 3 | 45 | 10450 | 9928 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Clean Box 200 ES | 1 ~ 110-220 | ceiling mounting, wall mounting, flush mounting | - | 200 | for round air ducts | - | - | polymer-coated steel | - | - | - | - | 0.1 | 18 | - | 50/60 | - | - | - | - | Supply | 16.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QRA 150 50 Hz |
220-240 | wall mounting | axial | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 200 | 50 | 1300 | - | - | - | Exhaust, Supply | - | 36 | -30 … +40 | - | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 56 | 1.91 | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.26 | - | - | - | - | - | - | - | - | - | - |
Axis-QRA 150 60 Hz |
220-240 | wall mounting | axial | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 205 | 60 | 1590 | - | - | - | Exhaust, Supply | - | 26 | -30 … +40 | - | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 57 | 1.91 | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.26 | - | - | - | - | - | - | - | - | - | - |
Box-FI 50x25 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 500 | 250 | galvanized steel | no | no | yes | - | 2.49 | - | 1750 | 50 | 1250 | - | - | - | Exhaust, Supply | - | 535 | - | - | IPX4 | 1 | 44 | - | - | - | - | - | - | - | - | - | -20...+40 | - | - | - | - | - | - | - | 486 | 40.5 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Helix 200х80 4Е | 230 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.55 | - | 730 | 50 | 1430 | - | - | - | Exhaust, Supply | 6.8 | 125 | -25 +45 | B | IPX4 | - | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 203 | - | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x2 V3(1 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.32 | - | - | 50 | 1400 | - | - | 97 | Exhaust, Supply | 3.1 | 20 | 50 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x2 V3(2 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.34 | - | - | 50 | 1800 | - | - | 138 | Exhaust, Supply | 3.1 | 26 | 50 | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x2 V3(3 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.4 | - | - | 50 | 2600 | - | - | 176 | Exhaust, Supply | 3.1 | 45 | 50 | C | IPX4 | - | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC MW 2000 S31 | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | yes | no | - | - | - | - | 2150 | 50 | - | - | - | - | Supply | - | - | - | - | - | 1 | 53 | - | - | - | - | - | -30…+40 | - | - | 500 x 300 | - | 4 | 30 mm mineral wool | - | - | - | - | - | - | 45 | 2018 | - | - | - | - | - | - | 387 | - | 1.7 | - | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | 150 | 1 |
KOMFORT LE 600-4 | 230 | ceiling mounting, wall mounting, floor mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | - | 600 | 50/60 | 1350 | - | 85 | - | - | - | - | - | E | - | 1 | 32-48 | - | - | cross-flow | polystyrene | 4000 | - | 17.4 | 19.1 | 200 | -25...+40 | - | 25 mm mineral wool | - | 4390 | - | - | - | 167 | 54 | 2016 | - | - | G4 | G4 | - | 390 | - | 1.72 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso 125-2Е | 230 | Inline | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | 0.52 | - | 530 | 50 | 2650 | - | - | - | Exhaust, Supply | 4.57 | 155 | -25 +40 | C | IPX4 | - | 38.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 147 | - | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Freshbox E-100 Speed I |
230 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | 30 | 50/60 | 2200 | I | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | - | 100 | -20...+40 | - | - | 98 | - | - | - | 10 | 8 | - | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | 12 | - | 0.4 | - | - | 3.6 | - | 700 | 13 | - | LCD | Filter replacement indication, Timer, Weekly schedule | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Freshbox E-100 Speed II |
230 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | 60 | 50/60 | 2200 | II | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | - | 100 | -20...+40 | - | - | 92 | - | - | - | 10 | 17 | - | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | 21 | - | 0.4 | - | - | 3.6 | - | 700 | 27 | - | LCD | Filter replacement indication, Timer, Weekly schedule | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Freshbox E-100 Speed III |
230 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | 100 | 50/60 | 2200 | III | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | - | 100 | -20...+40 | - | - | 89 | - | - | - | 10 | 28 | - | - | - | - | G4 | G4, F8 (Option: F8 C, H13) | - | 45 | - | 0.4 | - | - | 3.6 | - | 700 | 39 | - | LCD | Filter replacement indication, Timer, Weekly schedule | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - |
Axis-Q 500 4D 50 Hz |
400 | wall mounting | axial | 500 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 6570 | 50 | 1300 | - | - | - | Exhaust, Supply | - | 450 | - | - | IPX4 | 3 | 60 | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | 1825 | 14.0 | - | - | - | - | - | IP54 | - | - | - | - | - | - | 0.9 | - | - | - | - | - | - | - | - | - | - |
Axis-Q 500 4D 60 Hz |
400 | wall mounting | axial | 500 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 6230 | 60 | 1605 | - | - | - | Exhaust, Supply | - | 370 | - | - | IPX4 | 3 | 60 | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | 1731 | 14.0 | - | - | - | - | - | IP54 | - | - | - | - | - | - | 0.7 | - | - | - | - | - | - | - | - | - | - |
Iso-RB 450 L | 230 | Inline | centrifugal | 450 | for round air ducts | - | - | aluzinc | no | no | yes | - | 2.13 | - | 3750 | 50 | 1350 | - | - | - | Exhaust, Supply | - | 482 | - | - | IPX4 | 1 | 50 | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | 1042 | 84 | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 450 4D | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 1.50 | - | 5920 | 50 | 1440 | - | - | - | Exhaust | 45.5 | 755 | -30…+50 | - | IPX4 | 3 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1644 | - | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 150 V2 min |
230 | Inline | centrifugal | 150, 160 | for round air ducts | - | - | plastic | no | no | no | - | 0.22 | - | 264 | - | 1805 | - | - | - | Exhaust, Supply | - | 46 | -25...+55 | D | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 73 | 2.45 | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 150 V2 max |
230 | Inline | centrifugal | 150, 160 | for round air ducts | - | - | plastic | no | no | no | - | 0.26 | - | 445 | - | 2420 | - | - | - | Exhaust, Supply | - | 59 | -25...+55 | D | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 124 | 2.45 | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Primo 250 (min) | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | - | no | no | no | - | - | 144 | 1038 | 50 | 2292 | min | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 39 | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | 288 | - | 2018 | - | - | - | - | IP20 | - | - | - | - | - | - | 0.70 | - | - | - | - | - | - | - | - | - | - |
Primo 250 (mid) | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | - | no | no | no | - | - | 173 | 1447 | 50 | 2626 | mid | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 41 | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | 402 | - | 2018 | - | - | - | - | IP20 | - | - | - | - | - | - | 0.81 | - | - | - | - | - | - | - | - | - | - |
Primo 250 (max) | 230 | Inline | mixed-flow | 250 | for round air ducts | - | - | - | no | no | no | - | - | 188 | 1715 | 50 | 2876 | max | - | - | Supply and exhaust | - | - | - | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | 476 | - | 2018 | - | - | - | - | IP20 | - | - | - | - | - | - | 0.84 | - | - | - | - | - | - | - | - | - | - |
S-Vent 400х183-1.5-8D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 4.2 | - | 6545 | 50 | 700 | - | - | - | Exhaust, Supply | 57.1 | 1500 | +60 | - | IP54 | 3 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1818 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 100x50 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | - | - | 10500 | 50 | 900 | - | - | - | Exhaust, Supply | 120.0 | 1198 | - | - | IPX4 | 3 | 69 | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | 2.7 | - | - | - | - | - | - | - | - | - | - |
Tower-HC EC 250 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 1.25 | - | 1500 | 50/60 | 3310 | - | - | - | Exhaust | - | 164 | -25...+60 | – | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 417 | 8 | 2018 | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |