Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Form | Length | Material | Device | Current | Maximum air flow | Sound pressure level | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Number of electrical heating elements | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Air flow in heat recovery mode | Filter | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Humidity recovery efficiency | Insulation | Heat recovery efficiency | Operating temperature range | Voltage | Maximum air flow | SFP | Weight | ErP | Extract filter | Supply filter | Air duct wire | Air speed | Maximum operating pressure | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Maximum power consumption in "Heat Recovery" | Maximum power consumption in "Heat Recovery + Heat Pump" | Maximum power consumption in "Heat Recovery" | Air-handling unit energy efficiency "Heating" mode (COP) | Air-handling unit energy efficiency "Cooling" mode (ERR) | Coolant | Coolant weight | Heat output in "Heating" mode [kW] at t0 = +7 °C; tk = +45 °C* | Heat output in "Cooling" mode [kW] at t0 = +7 °C; tk = +45 °C* | Compressor type | Temperature setting range in "Cooling/Heating" | Heat output in "Cooling" mode [W] at t0 = +7 °C; tk = +45 °C | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Remote control panel | Functions | Cable cross section | * | Motor max. power | Spigot |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
VENTO Ergo A50 Pro (1 speed) |
- | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | - | - | 0.024 | 21 | - | 50/60 | 610 | - | - | - | - | - | 4.5 | - | A | IP24 | - | - | - | - | - | 22 | 13 | 40 | ≤ 88 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - |
VENTO Ergo A50 Pro (2 speed) |
- | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | - | - | 0.026 | 32 | - | 50/60 | 800 | - | - | - | - | - | 5 | - | A | IP24 | - | - | - | - | - | 29 | 20 | 40 | ≤ 88 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - |
VENTO Ergo A50 Pro (3 speed) |
- | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | - | - | 0.039 | 50 | - | 50/60 | 1450 | - | - | - | - | - | 7 | - | A | IP24 | - | - | - | - | - | 32 | 23 | 40 | ≤ 88 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - |
Box-F 60x30 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 600 | 300 | galvanized steel | no | no | no | - | - | - | - | 6.45 | 2950 | - | 50 | 1210 | - | - | - | Exhaust, Supply | - | 1240 | -25...+50 | - | IPX4 | 1 | 59 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 820 | - | 35.0 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 60x35 6E | 230 | Inline | centrifugal | - | for rectangular air ducts | 600 | 350 | galvanized steel | no | no | yes | - | - | - | - | 3.6 | 2755 | - | 50 | 820 | - | - | - | Exhaust, Supply | - | 720 | - | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+60 | - | - | - | - | - | - | - | 765 | - | 72 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX E 1200-9 Pro | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | - | 1190 | - | 50 | 2600 | - | - | - | Supply | - | - | - | - | - | 3 | 30 | - | - | 9000 | - | - | - | - | 3 | -25...+40 | 13.0 | - | 315 | - | G4 | - | - | - | - | 25 mm mineral wool | - | - | - | 331 | - | 62 | 2016, 2018 | - | - | - | - | - | - | - | 171 | 0.77 | - | 9171 | 13.77 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 400 4D 50 Hz |
400 | Inline | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | 3740 | - | 50 | 1380 | - | - | - | Exhaust, Supply | - | 180 | - | - | IPX4 | 3 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | 1039 | - | 8.1 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | 0.47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 400 4D 60 Hz |
400 | Inline | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | 3870 | - | 60 | 1625 | - | - | - | Exhaust, Supply | - | 195 | - | - | IPX4 | 3 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | 1075 | - | 8.1 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | 0.55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC ME 1000-6 S31 | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | yes | no | - | - | - | - | - | - | 1000 | - | 50 | - | - | - | - | Supply | - | - | - | - | - | 3 | 45 | - | - | 6000 | - | - | - | - | - | -30…+40 | - | - | 400 x 200 | - | - | - | - | - | - | 30 mm mineral wool | - | - | - | - | - | 30 | 2018 | - | - | - | - | - | - | - | 165 | 1.3 | - | 6165 | 11 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | - |
BlauFlex Iso N 162/7.6 | - | - | - | 162 | for round air ducts | - | - | - | - | - | - | round | 7600 | - | air duct | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 mm mineral wool | - | -30...+120 | - | - | - | - | - | - | - | - | 30 | 3000 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H EC 500 | 400 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | - | - | - | 2.08 | 10900 | - | 50/60 | 1480 | - | - | - | Exhaust | - | 1350 | -25...+50 | – | IPX4 | 3 | 67 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3028 | - | 51 | 2018 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M 150 (60 Hz) | 220-240 | Inline | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 0.55 | 610 | - | 60 | 3100 | - | - | - | Exhaust, Supply | - | 125 | - | – | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+45 | - | - | - | - | - | - | - | 169 | - | 4.7 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M 150 (50 Hz) | 220-240 | Inline | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | 0.45 | 580 | - | 50 | 2700 | - | - | - | Exhaust, Supply | - | 100 | - | C | IPX4 | 1 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25…+45 | - | - | - | - | - | - | - | 161 | - | 4.7 | 2018 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LHP 400 S17 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | - | 520 | - | 50 | - | - | - | - | - | - | - | - | - | - | 1 | 45 | rotary | aluminum | - | - | - | - | - | - | - | - | - | 160 | - | - | -10…+40 | - | - | - | - | 85 | - | - | 53 | - | 150 | - | G4 | G4 (Option: F7) | - | - | - | - | - | - | - | 4.6 | - | - | - | - | 0.745 | 0.31 | 6 | 4 | R410A | 0.8 | 1.56 | - | Sealed, rotary type | +16...+30 | 1.2 | - | - | - | - | - | - | - | - | - | - |
Valeo-BP 75/100 (1 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | - | - | - | - | - | 0.11 | 75 | 29* | 50 | - | I | - | - | Exhaust | - | 24 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | 21 | - | - | - | - | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3x1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - |
Valeo-BP 75/100 (2 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | - | - | - | - | - | 0.13 | 100 | 38* | 50 | - | II | - | - | Exhaust | - | 29 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | 28 | - | - | - | - | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3x1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - |
Box EC 70x40-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | - | - | - | 5710 | - | 50/60 | 1400 | - | - | - | Exhaust, Supply | 42.2 | 795 | - | – | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | 1586 | - | - | 2018 | - | - | - | - | - | - | IP54 | - | - | - | - | - | 3.48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Ergo A85 S10 Pro1 (1 speed) |
- | - | - | - | 150 | - | - | - | - | - | - | - | - | - | - | 0.034 | 36 | - | 50/60 | 1000 | I | - | - | - | - | 4.74 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | 18 | - | -20...+40 | 40 | - | - | - | - | - | 100-230 | 10 | 0.95 | - | - | - | - | - | - | - | 5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 29 | 19 | G3 (Option: F8 PM2,5 > 99 %*) | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - |
Vento Ergo A85 S10 Pro1 (2 speed) |
- | - | - | - | 150 | - | - | - | - | - | - | - | - | - | - | 0.050 | 59 | - | 50/60 | 1500 | II | - | - | - | - | 6.56 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | -20...+40 | 40 | - | - | - | - | - | 100-230 | 16 | 0.80 | - | - | - | - | - | - | - | 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 35 | 25 | G3 (Option: F8 PM2,5 > 99 %*) | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - |
Vento Ergo A85 S10 Pro1 (3 speed) |
- | - | - | - | 150 | - | - | - | - | - | - | - | - | - | - | 0.071 | 85 | - | 50/60 | 2045 | III | - | - | - | - | 9.65 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | 43 | - | -20...+40 | 40 | - | - | - | - | - | 100-230 | 24 | 0.82 | - | - | - | - | - | - | - | 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 44 | 34 | G3 (Option: F8 PM2,5 > 99 %*) | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - |
KOMFORT Roto EC LE 1200-6 S17 | 400 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | - | 1200 | - | 50/60 | 1930 | - | - | - | - | - | - | - | - | - | 3 | 60 | rotary | aluminum | 6000 | - | - | - | - | - | - | - | - | 315 | - | - | -25...+40 | - | - | - | 20 mm mineral wool | 73–95 | - | - | 333 | - | 165 | 2016, 2018 | G4 | G4 | - | - | - | - | - | - | - | - | 6570 | 9.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 208 | - |
Iso-ZS 315 4E max | 230 | - | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | - | - | 4.18 | - | - | 50 | 1430 | - | - | 3520 | Exhaust, Supply | 38.0 | 931 | -20…+50 | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
inWave 150/160 min |
230 | Inline | mixed-flow | - | for round air ducts | - | - | plastic | no | no | yes | - | - | - | - | - | 242 | - | 50 | 1982 | min | - | - | Exhaust, Supply, Supply and exhaust | 5.0 | 25 | –25…+55 | - | IPX4 | 1 | 20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 67 | - | - | 2018 | - | - | - | - | - | - | IP20 | - | - | - | - | - | 0.20 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150/160 |
inWave 150/160 med |
230 | Inline | mixed-flow | - | for round air ducts | - | - | plastic | no | no | yes | - | - | - | - | - | 320 | - | 50 | 2374 | med | - | - | Exhaust, Supply, Supply and exhaust | 5.0 | 46 | –25…+55 | - | IPX4 | 1 | 26 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 89 | - | - | 2018 | - | - | - | - | - | - | IP20 | - | - | - | - | - | 0.21 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150/160 |
inWave 150/160 max |
230 | Inline | mixed-flow | - | for round air ducts | - | - | plastic | no | no | yes | - | - | - | - | - | 540 | - | 50 | 2738 | max | - | - | Exhaust, Supply, Supply and exhaust | 5.0 | 51 | –25…+55 | - | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150 | - | - | 2018 | - | - | - | - | - | - | IP20 | - | - | - | - | - | 0.24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 150/160 |
KOMFORT ERV EC DB 350 S14 | 230 | ceiling mounting, flush mounting | - | - | for round air ducts | - | - | - | yes | no | yes | - | - | - | - | - | 430 | - | 50/60 | 3200 | - | - | - | Supply and exhaust | - | 171 | - | A | - | 1 | 46 | cross-flow | enthalpy | - | - | - | - | - | - | - | - | 1.3 | 150 | - | - | -25...+40 | - | - | 19...34 | - | 68...85 | - | - | 119 | - | 42 | 2016, 2018 | G4 | G4 + F8 (PM2.5 > 87 %) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 400 6E (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | 0.89 | 2740 | - | 50 | 945 | - | - | - | Exhaust | 32.7 | 184 | -30…+60 | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 761 | - | - | 2018 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 400 6E (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | 1.10 | 3289 | - | 60 | 1071 | - | - | - | Exhaust | 32.7 | 249 | -30…+60 | - | IPX4 | 1 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 914 | - | - | – | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-HC 250 2E (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | 0.81 | 1485 | - | 50 | 2480 | - | - | - | Exhaust | - | 184 | -25…+50 | – | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 413 | - | 8 | 2018 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-HC 250 2E (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | 0.90 | 1350 | - | 60 | 2320 | - | - | - | Exhaust | - | 232 | -25…+50 | – | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 375 | - | 8 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 355 | 230 | Inline | centrifugal | 355 | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | - | 0.89 | 2235 | - | 50 | 1330 | - | - | - | Exhaust, Supply | - | 202 | - | - | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | 621 | - | 58 | 2018 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 160x74-0.55-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | 1.6 | 750 | - | 50 | 1360 | - | - | - | Exhaust, Supply | 12.7 | 550 | +60 | D | IP54 | 3 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 208 | - | - | 2018 | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-D 125 L (50 Hz) | 230 | Inline | centrifugal | 125 | for round air ducts | - | - | galvanized steel | no | no | no | - | - | - | - | 0.34 | - | - | 50 | 2300 | - | - | 225 | Exhaust | 2.9 | 56 | -25 +45 | C | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-D 125 L (60 Hz) | 230 | Inline | centrifugal | 125 | for round air ducts | - | - | galvanized steel | no | no | no | - | - | - | - | 0.35 | - | - | 60 | 2570 | - | - | 240 | Exhaust | 2.9 | 58 | -25 +45 | C | IPX4 | 1 | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT ERV D 450 S3 | 230 | ceiling mounting, flush mounting | - | - | - | - | - | polymer-coated steel | no | - | - | - | - | - | - | - | 500 | - | 50 | 2870 | - | - | - | - | - | 354 | - | E | - | 1 | 57 | cross-flow | enthalpy | - | - | - | - | - | - | - | - | - | 150 | - | - | -5...+40 | - | - | 23...40 | 5-10 mm, expanded polyurethane | 71...87 | - | - | 139 | - | 39 | - | G4 | G4 + F8 (PM2.5 > 93 %) | - | - | - | - | - | - | - | - | - | - | 1.54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT LW 1700-4 | 230 | ceiling mounting, wall mounting, floor mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | - | 1700 | - | 50 | 1100 | - | 77 | - | - | - | 980 | - | - | - | 1 | 49 | cross-flow | polystyrene | - | - | - | - | - | - | - | - | 4.3 | 315 | - | - | -25...+40 | - | 4 | - | 50 mm mineral wool | - | - | - | 472 | - | 99 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-B 125 | 230 | Inline | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | - | - | 0.32 | - | - | 50 | 2590 | - | - | 330 | Exhaust, Supply | 5.4 | 73 | -25 +55 | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |