Mode | Voltage | Style | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Current | Power | Maximum air flow | Sound pressure level | Frequency | RPM | Speed | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Heat exchanger type | Cable cross section | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Number of electrical heating elements | Transported air temperature | Electric heater current | Connected air duct diameter | Filter | Transported air temperature | Humidity recovery efficiency | Insulation | Heat recovery efficiency | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Maximum air flow | Extract filter | Supply filter | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Maximum power consumption in "Heat Recovery + Heat Pump" | Maximum power consumption in "Heat Recovery" | Maximum power consumption in "Heat Recovery + Heat Pump + Pre-Heating" | Air-handling unit energy efficiency "Heating" mode (COP) | Air-handling unit energy efficiency "Cooling" mode (ERR) | Coolant | Coolant weight | Heat output in "Heating" mode [kW] at t0 = +7 °C; tk = +45 °C* | Compressor type | Temperature setting range in "Cooling/Heating" | Heat output in "Cooling" mode [W] at t0 = +7 °C; tk = +45 °C | Preheater power consumption | Filter | Remote control panel | Functions | Power | * | Sound power level LwA to environment | Sound pressure level LpA to environment at 1 m distance | Sound pressure level LpA to environment at 3 m distance | Extract filter ISO 16890 / EN 779:2012 | Supply filter ISO 16890 / EN 779:2012 | Connected air duct diameter | Spigot |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wind-K 125 | 220-240 | White | Window mounting | axial | 125 | - | - | - | - | - | - | - | - | 0.1 | 22 | 185 | 35* | 50 | 2400 | - | - | Exhaust | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 51 | 0.43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - | - | - | - | - |
Freshbox 110 Speed I |
230 | - | - | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | 0.26 | - | - | - | 50/60 | 3200 | I | - | - | 20 | - | - | A | - | 1 | - | counter-flow | - | polystyrene | - | - | - | - | - | - | - | - | - | - | -15…+40 | - | 10 | 93* | - | - | - | - | - | - | - | - | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 | Heat recovery efficiency is specified in compliance with EN 13141-8 | 31 | 20 | 10 | Coarse 90 % / G4 | Coarse 90 % / G4. Optional: ePM1 65% / F7 | 2×100 mm + optional 1×100 mm | - |
Freshbox 110 Speed II |
230 | - | - | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | 0.26 | - | - | - | 50/60 | 3200 | II | - | - | 20 | - | - | A | - | 1 | - | counter-flow | - | polystyrene | - | - | - | - | - | - | - | - | - | - | -15…+40 | - | 10 | 87* | - | - | - | - | - | - | - | - | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | Heat recovery efficiency is specified in compliance with EN 13141-8 | 41 | 30 | 21 | Coarse 90 % / G4 | Coarse 90 % / G4. Optional: ePM1 65% / F7 | 2×100 mm + optional 1×100 mm | - |
Freshbox 110 Speed III |
230 | - | - | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | 0.26 | - | - | - | 50/60 | 3200 | III | - | - | 20 | - | - | A | - | 1 | - | counter-flow | - | polystyrene | - | - | - | - | - | - | - | - | - | - | -15…+40 | - | 10 | 84* | - | - | - | - | - | - | - | - | 100 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 31 | Heat recovery efficiency is specified in compliance with EN 13141-8 | 51 | 40 | 31 | Coarse 90 % / G4 | Coarse 90 % / G4. Optional: ePM1 65% / F7 | 2×100 mm + optional 1×100 mm | - |
KOMFORT Roto EC D2E250 S17 | 230 | - | - | - | - | - | - | - | painted steel | - | - | - | - | - | - | 300 | - | 50/60 | 2200 | - | - | - | - | - | - | A | - | 1 | 23 | rotary | - | aluminum | - | - | - | - | - | - | - | 3.1 | 160 | - | -25...+40 | - | 20 mm mineral wool | 72–87 | - | - | - | 700 | 83 | - | 54 | 2016, 2018 | - | - | G4 | G4 + F7 (Option: H13) | - | 128 | 828 | 0.9 | 4.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 225х103-1.1-4D | 400 | - | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 2.8 | - | 2125 | - | 50 | 1420 | - | - | Exhaust, Supply | 21.2 | 1100 | +60 | - | IP54 | 3 | 72 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 590 | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x2 V3(1 speed) | 230 | - | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.32 | - | - | - | 50 | 1400 | - | 97 | Exhaust, Supply | 3.1 | 20 | 50 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x2 V3(2 speed) | 230 | - | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.34 | - | - | - | 50 | 1800 | - | 138 | Exhaust, Supply | 3.1 | 26 | 50 | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x2 V3(3 speed) | 230 | - | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.4 | - | - | - | 50 | 2600 | - | 176 | Exhaust, Supply | 3.1 | 45 | 50 | C | IPX4 | - | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR EC 300 | 230 | - | wall mounting | axial | 317 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | - | - | 2400 | - | 50/60 | 2000 | - | - | Supply and exhaust | - | 150 | - | - | IPX5 | 1 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | –25…+60 | - | - | - | - | - | - | - | 667 | - | 2.7 | - | - | - | - | - | IP55 | - | - | - | - | - | - | 1.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC S250 S11 | 220-240 | - | wall mounting, floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | - | 290 | - | 50/60 | 2050 | - | - | - | - | 115 | - | A | - | - | 25 | counter-flow | - | polystyrene | - | - | - | - | - | - | - | - | 160 | - | -25...+40 | - | 30 mm mineral wool | 85...94 | - | - | - | - | 81 | - | 51 | 2016, 2018 | - | - | G4 | G4, F7 | - | - | - | - | - | - | - | 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC LB 300-E S21 | 230 | - | ceiling mounting, floor mounting | - | - | - | - | - | galvanized steel | - | - | - | - | - | - | 380 | - | 50/60 | - | - | - | - | - | - | - | A | - | 1 | 24 | counter-flow | - | enthalpy | - | - | - | - | - | - | - | - | 160 | - | -25…+40 | - | 40 mm mineral wool | 74–89 | - | - | - | - | 106 | - | 63.1 | - | - | - | G4 | G4, F7 | - | 182 | - | 1.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-B 315 | 230 | - | Inline | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | 1.40 | - | - | - | 50 | 2670 | - | 2150 | Exhaust, Supply | 15.5 | 322 | -25 +45 | B | IPX4 | - | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC ME 700-6 S31 | 400 | - | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | yes | no | - | - | - | - | 760 | - | 50 | - | - | - | Supply | - | - | - | - | - | 3 | 41 | - | - | - | 6000 | - | - | - | - | - | -30…+40 | - | 250 | - | - | - | 30 mm mineral wool | - | - | - | - | - | - | - | 27 | 2018 | - | - | - | - | - | 116 | - | 0.5 | - | 6116 | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LEHP 700 S18 | 230 | - | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | 830 | - | 50 | - | - | - | - | - | - | - | - | - | 1 | 52 | rotary | - | aluminum | - | - | - | - | - | - | - | - | 250 | - | -25…+40 | - | - | 85 | - | - | - | - | 231 | - | 160 | - | - | - | G4 | G4 (Option: F7) | - | - | - | - | 18.5 | - | - | - | 0.94 | 0.36 | 3.74 | 6.5 | 4.15 | R410A | 1.6 | 2.6 | Sealed, rotary type | +16...+30 | 2 | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO Ergo A25-1 S Pro (1 speed) | 100-230 | - | wall mounting | - | - | 100 | - | - | - | - | - | - | - | 0.024 | - | 7 | - | 50/60 | 1250 | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | 31 | 22 | 19 | ≤ 85 | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - | - | - | - | - |
VENTO Ergo A25-1 S Pro (2 speed) | 100-230 | - | wall mounting | - | - | 100 | - | - | - | - | - | - | - | 0.027 | - | 16 | - | 50/60 | 1397 | - | - | - | - | 4.15 | - | A | IP24 | - | - | - | - | - | - | 35 | 25 | 19 | ≤ 85 | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - | - | - | - | - |
VENTO Ergo A25-1 S Pro (3 speed) | 100-230 | - | wall mounting | - | - | 100 | - | - | - | - | - | - | - | 0.038 | - | 25 | - | 50/60 | 2541 | - | - | - | - | 5.59 | - | A | IP24 | - | - | - | - | - | - | 43 | 33 | 19 | ≤ 85 | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - | - | - | - | - |
Box-F 60x30 6E | 230 | - | Inline | centrifugal | - | for rectangular air ducts | 600 | 300 | galvanized steel | no | no | no | - | 2.05 | - | 2260 | - | 50 | 870 | - | - | Exhaust, Supply | - | 419 | -20...+70 | - | IPX4 | 1 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 628 | - | 35.0 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE 500 S21 | 230 | - | ceiling mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | 510 | - | 50/60 | 1700 | - | - | Supply and exhaust | 128 | - | - | A | - | 1 | 24 | counter-flow | - | polystyrene | - | - | - | - | - | - | -25...+40 | - | 250 | - | - | - | 25 mm, cellular synthetic rubber | 74...86* | 34 | - | 170 | - | 142 | - | - | - | - | - | G4 | G4, F8 (option F8 C + H11) | - | - | - | 1.7 | - | - | 10.4 | - | - | - | - | - | - | - | - | - | - | - | - | 1750 | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - |
BLAUBOX E 1200-6 Pro | 400 | - | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | 1190 | - | 50 | 2600 | - | - | Supply | - | - | - | - | - | 3 | 30 | - | - | - | 6000 | - | - | - | - | 3 | -25...+40 | 8.7 | 315 | G4 | - | - | 25 mm mineral wool | - | - | - | - | - | 331 | - | 62 | 2016, 2018 | - | - | - | - | - | 171 | - | 0.77 | - | 6171 | 9.47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 450 4D 50 Hz |
400 | - | Inline | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 5280 | - | 50 | 1360 | - | - | Exhaust, Supply | - | 250 | - | - | IPX4 | 3 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | 1467 | - | 9.1 | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 450 4D 60 Hz |
400 | - | Inline | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 5350 | - | 60 | 1620 | - | - | Exhaust, Supply | - | 275 | - | - | IPX4 | 3 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | 1486 | - | 9.1 | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Bravo 150 | 220-240 | White | ceiling mounting, wall mounting | axial | 150 | - | - | - | - | - | - | - | - | 0.13 | 24 | 305 | 39* | 50 | 2400 | - | - | Exhaust | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 85 | 0.28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - | - | - | - | - |
Box-FI 100x50 8D | 400 | - | Inline | centrifugal | - | for rectangular air ducts | 1000 | 500 | galvanized steel | no | no | yes | - | 4.1 | - | 7175 | - | 50 | 680 | - | - | Exhaust, Supply | - | 2000 | - | - | IPX4 | 3 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+40 | - | - | - | - | - | - | - | 1993 | - | 150 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LB 300 S21 | 230 | - | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | - | 320 | - | 50/60 | 2150 | - | - | Supply and exhaust | 138±3% | - | - | A | - | 1 | 21 | counter-flow | - | polystyrene | - | - | - | - | - | - | -25...+40 | - | 200 | - | - | - | 40 mm mineral wool | 78...92* | 31 | - | 125 | - | 89 | - | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | 0.9 | - | - | 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - | - |
Tower-H EC 560 | 400 | - | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 3.83 | - | 13640 | - | 50/60 | 1540 | - | - | Exhaust | - | 2412 | -25...+60 | – | IPX4 | 3 | 69 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3789 | - | 71 | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 150 V2 min |
230 | - | Inline | centrifugal | 150, 160 | for round air ducts | - | - | plastic | no | no | no | - | 0.22 | - | 264 | - | - | 1805 | - | - | Exhaust, Supply | - | 46 | -25...+55 | D | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 73 | - | 2.45 | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 150 V2 max |
230 | - | Inline | centrifugal | 150, 160 | for round air ducts | - | - | plastic | no | no | no | - | 0.26 | - | 445 | - | - | 2420 | - | - | Exhaust, Supply | - | 59 | -25...+55 | D | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 124 | - | 2.45 | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
inWave EC 100/125 max (100 spigot) | 230 | - | Inline | mixed-flow | - | for round air ducts | - | - | plastic | yes | no | yes | - | - | - | 295 | - | 50/60 | 3168 | - | - | Exhaust, Supply | 5.0 | 39 | –25…+55 | - | IPX4 | 1 | 31 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 82 | - | - | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | 0.36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 100 |
Iso-RB 200 | 230 | - | Inline | centrifugal | 200 | for round air ducts | - | - | aluzinc | no | no | yes | - | 0.71 | - | 770 | - | 50 | 2580 | - | - | Exhaust, Supply | - | 164 | - | C | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | 314 | - | 22.6 | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Valeo-BF 35/60 (2 speed) |
220-240 | - | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.14 | - | 63 | - | 50 | - | II | - | Exhaust | - | 25 | +50 | - | IP55 | - | 36 | - | 3х1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 18 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Valeo-BF 35/60 (1 speed) |
220-240 | - | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.12 | - | 35 | - | 50 | - | I | - | Exhaust | - | 15 | +50 | - | IP55 | - | 27 | - | 3х1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box EC 70x40-3 max | 400 | - | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | - | - | - | - | - | 6810 | - | 50/60 | 2530 | - | - | Exhaust, Supply | 43.0 | 2748 | - | – | IPX4 | 3 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | 1892 | - | - | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | 2.80 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |