Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Length | Current | Maximum air flow | Frequency | RPM | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Filter | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Humidity recovery efficiency | Insulation | Heat recovery efficiency | Total unit power | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Max. current consumption with an electric heater | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air flow in heat recovery mode | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | * | Motor max. power | Transported air temperature | Max. air flow at air flow direction (direct air flow) | Max. air flow at air flow direction (perpendicular air flow) | Max. water temperature | Water coil connection diameter |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Axis-Q 250 2D 50 Hz |
400 | wall mounting | axial | 250 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 1060 | 50 | 2600 | - | Exhaust, Supply | - | 80 | - | - | IPX4 | 3 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | 294 | - | 4.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 250 2D 60 Hz |
400 | wall mounting | axial | 250 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 1150 | 60 | 3030 | - | Exhaust, Supply | - | 92 | - | - | IPX4 | 3 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | 319 | - | 4.0 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Blaubox EC MW 1000 S31 | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | aluzinc | yes | no | - | - | - | - | 920 | 50 | - | - | Supply | - | - | - | - | - | 1 | 48 | - | - | - | - | - | - | - | - | - | -30…+40 | - | - | 400 x 200 | - | - | - | 4 | - | 30 mm mineral wool | - | - | - | - | - | - | - | - | - | 35 | 2018 | - | - | - | - | - | - | - | 165 | - | 1.23 | - | - | - | - | - | - | Coarce 90% / G4 (option: ePM1 70% / F7) | - | - | - | - | - | - | - | - | - | 150 | 1 |
Clean Box 200 G4-F8-Carbon | - | ceiling mounting, wall mounting, flush mounting | - | 200 | for round air ducts | polymer-coated steel | - | - | - | - | - | - | - | - | - | - | Supply | 11.84 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 250 2Е (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.90 | 1320 | 60 | 2320 | - | Exhaust | 9 | 232 | -25…+50 | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 367 | - | - | – | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 250 2Е (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.81 | 1450 | 50 | 2480 | - | Exhaust | 9 | 184 | -25…+50 | - | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 403 | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 315 | 230 | Inline | centrifugal | 315 | for round air ducts | polymer-coated steel | yes | no | no | - | - | 1.15 | 1370 | 50/60 | 2900 | - | Exhaust, Supply | - | 164 | - | – | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 381 | - | 7.30 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - |
Iso-B EC 160 | 230 | Inline | centrifugal | 160 | for round air ducts | galvanized steel | yes | no | yes | - | - | 0.77 | 425 | 50/60 | 3200 | - | Exhaust, Supply | - | 94.8 | - | B | IPX4 | 1 | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | - | - | 118 | - | - | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50 S Pro (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - |
VENTO A50 S Pro (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - | - |
Box-I EC 40x20-1 max | 230 | Inline | centrifugal | - | for rectangular air ducts | galvanized steel | yes | no | yes | - | - | 1.43 | - | 50/60 | 3010 | 1190 | Exhaust, Supply | 16.8 | 192 | -25...+50 | – | IPX4 | 1 | 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 331 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Expert Duo A30-1 S10 Pro (1 speed) |
100-240 | - | - | - | 160 | - | yes | - | - | - | - | 0.027 | 10 | 50/60 | 1600 | - | - | - | 2.00 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | -15…+40 | - | - | - | G3 | - | 42 | - | - | - | - | - | - | - | - | - | - | 3 | 0.72 | - | - | - | - | - | 60 | 16 | - | - | - | - | - | - | - | - | - | 33 | 24 | - | up to 85 | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D2 | - | - | - | - | - | - | - |
Vento Expert Duo A30-1 S10 Pro (2 speed) |
100-240 | - | - | - | 160 | - | yes | - | - | - | - | 0.043 | 20 | 50/60 | 2200 | - | - | - | 3.70 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | -15…+40 | - | - | - | G3 | - | 42 | - | - | - | - | - | - | - | - | - | - | 6 | 0.67 | - | - | - | - | - | 60 | 16 | - | - | - | - | - | - | - | - | - | 40 | 31 | - | up to 85 | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D2 | - | - | - | - | - | - | - |
Vento Expert Duo A30-1 S10 Pro (3 speed) |
100-240 | - | - | - | 160 | - | yes | - | - | - | - | 0.067 | 30 | 50/60 | 2500 | - | - | - | 6.40 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | -15…+40 | - | - | - | G3 | - | 42 | - | - | - | - | - | - | - | - | - | - | 8 | 0.77 | - | - | - | - | - | 60 | 16 | - | - | - | - | - | - | - | - | - | 43 | 34 | - | up to 85 | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D2 | - | - | - | - | - | - | - |
KOMFORT ERV D 150 S20 | 230 | ceiling mounting | - | - | for round air ducts | - | no | no | yes | - | - | - | 230 | 50/60 | 2235 | - | Supply and exhaust | - | - | - | D | - | 1 | 49 | - | - | cross-flow | enthalpy | - | - | - | - | - | - | - | 0.6 | 100 | - | -25...+40 | - | - | 27...47 | 5 mm, 10 mm | 72...87 | 125 | - | - | - | - | - | 64 | - | - | 2016 | - | G4 | G4 + F8 (PM2.5 > 93 %) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 250 4Е 50 Hz |
230 | Inline | axial | 250 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 800 | 50 | 1380 | - | Exhaust, Supply | - | 50 | - | - | IPX4 | 1 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | 222 | - | 4.0 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 250 4Е 60 Hz |
230 | Inline | axial | 250 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 865 | 60 | 1730 | - | Exhaust, Supply | - | 56 | - | - | IPX4 | 1 | 39 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | 240 | - | 4.0 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 0.24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE 300 S21 V.2 | 230 | ceiling mounting | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | 300 | 50/60 | - | - | Supply and exhaust | 79 | - | - | A+ | - | 1 | 34 | - | - | counter-flow | polystyrene | - | - | - | - | - | -25...+40 | - | - | 200 | - | - | - | - | - | - | 83…92* | - | 44 | - | 204 | - | - | 83 | - | - | - | - | - | - | - | - | - | - | - | 1.5 | - | - | 7.7 | - | 1050 | - | - | - | - | - | Wi-Fi, Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - |
CIVIC EC LBE 300-E S21 | 230 | floor mounting | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | 320 | 50/60 | 2150 | - | Supply and exhaust | 137±3% | - | - | A | - | 1 | 21 | - | - | counter-flow | enthalpy | - | - | - | - | - | -25...+40 | - | - | 200 | - | - | - | - | - | 40 mm mineral wool | 73...89* | - | 31 | - | 125 | - | - | 89 | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | - | - | 0.9 | - | - | 7 | - | 1400 | - | - | - | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - | - | - | - |
Tower-H 400 4D | 400 | for roof | centrifugal | - | for round air ducts | polymer-coated steel | no | yes | no | - | - | 0.99 | 3950 | 50 | 1440 | - | Exhaust | 35 | 420 | -30…+60 | - | IPX4 | 3 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1097 | - | - | 2018 | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 450-4E | 230 | Inline | mixed-flow | 450 | for round air ducts | polymer-coated steel | no | no | yes | - | - | 7.72 | 6260 | 50 | 1475 | - | Exhaust, Supply | 51 | 1200 | - | - | IPX4 | 1 | 59 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | - | - | - | 1739 | - | - | 2016 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 355х143-2.2-6D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | polymer-coated steel | no | yes | no | - | - | 5.6 | 5090 | 50 | 940 | - | Exhaust, Supply | 49 | 2200 | +60 | - | IP54 | 3 | 71 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1414 | - | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 70x40 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | galvanized steel | - | - | - | - | - | 1.62 | 5580 | 50 | 1418 | - | Exhaust, Supply | 41.0 | 828 | - | - | IPX4 | 3 | 57 | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SBE 250-E S21 | 230 | wall mounting, floor mounting | - | - | - | polymer-coated steel | yes | - | - | - | - | - | 390 | 50/60 | - | - | - | - | 180 | - | A | - | 1 | 35 | - | - | counter-flow | enthalpy | 1400 | - | - | - | - | - | 6.09 | - | 160 | - | -25...+40 | - | - | - | 30 mm mineral wool | 78...90 | - | - | - | - | - | 7.46 | 108 | - | 66 | 2018 | - | G4 | G4 (Option: F7) | - | - | - | - | - | - | - | 1580 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 700-2 S17 | 230 | - | - | - | - | aluzinc | - | - | - | - | - | - | 700 | 50/60 | 2600 | - | - | - | - | - | A | - | 1 | 52 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | 250 | - | -25...+40 | - | - | - | 20 mm mineral wool | 76–95 | - | - | - | - | - | - | 194 | - | 128 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | - | - | 315 | 1.4 | - | - | - | - | - | - | - | - | - | - | 2 items x 105 | - | - | - | - | - |
Iso-V 560 6D | 400 | Inline | centrifugal | - | for rectangular air ducts, for round air ducts | aluminium, aluzinc | no | yes | yes | - | - | 1.7 | - | 50 | 885 | - | Exhaust, Supply | 86 | 780 | - | - | IPX4 | 3 | 49 | 7970 | 7330 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+55 | 2036 | 2214 | - | - |
TwinBox EC 355 | 220-240 | Inline | mixed-flow | - | for round air ducts | galvanized steel | yes | no | yes | - | - | 1.57 | 3060 | 50/60 | 2470 | - | Exhaust | 97 | 354 | –25…+55 | - | IPX4 | 1 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | 850 | - | - | 2016, 2018 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
SD 200/900 | - | - | - | 200 | for round air ducts | galvanized steel | - | - | - | - | 900 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 630 4D 50 Hz |
400 | wall mounting | axial | 630 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 12200 | 50 | 1320 | - | Exhaust, Supply | - | 800 | - | - | IPX4 | 3 | 69 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | - | - | 3389 | - | 20.0 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 1.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 630 4D 60 Hz |
400 | wall mounting | axial | 630 | for round air ducts | polymer-coated steel | no | no | no | - | - | - | 12400 | 60 | 1585 | - | Exhaust, Supply | - | 910 | - | - | IPX4 | 3 | 69 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | - | - | 3445 | - | 20.0 | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | 1.68 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-HC EC 225 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | polymer-coated steel | yes | yes | no | - | - | 0.80 | 1350 | 50/60 | 2478 | - | Exhaust | - | 95 | -25...+60 | – | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 375 | - | 7 | 2018 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D350 S17 | 230 | - | - | - | - | painted steel | - | - | - | - | - | - | 430 | 50/60 | 3570 | - | - | - | - | - | A | - | 1 | 31 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | 160 | - | -25...+40 | - | - | - | 40 mm mineral wool | 72–87 | - | - | - | - | - | - | 119 | - | 81 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | - | - | 185 | 185 | 1.3 | 1.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |