Blauberg Centro 125 L
- Capacity diagram
- Additional characteristics
- Designation key
Supply and extract ventilation systems installed in various premises. Mounting in kitchens, bathrooms and other humid premises. Compatible with Ø 100 up to 315 mm round air ducts.
Smooth speed control with a built-in electronic speed controller (option FR1). Smooth speed control with an external thyristor controller or step speed control with an external auto transformer (both available upon separate order). Centro V2 series: two-speed control with the external CDP-2/5 or CDP-2/10 speed switch (available upon separate order).
High-quality durable plastic casing. Aerodynamically shaped casing. Airtight mounting box. Centro 150 is compatible with 150 and 160 mm air ducts.
|MODIFICATIONS AND OPTIONS|
max: high-powered motor. L: low-powered and low-noise motor. FR1: smooth speed controller adjustable from 0 to 100 % and power cable with mains plug.
G1 speed controller, temperature controller with external temperature sensor (cable length 4 m), power cable with mains plug.
GI1: speed controller, temperature controller with integrated temperature sensor and power cable with mains plug.The G and GI modifications enable automatic speed control depending on indoor temperature. The optimal ventilation solution for premises requiring permanent temperature control as greenhouses, orangeries, etc.V: built-in speed switch (for two-speed models). W1 power cable with mains plug.
Single-phase external rotor motor with a centrifugal impeller with backward curved blades. Equipped with ball bearings for longer service life. Integrated thermal protection with automatic restart. Dynamically balanced impeller. Some standard sizes have high-powered motors (Centro max). For ventilation of premises with high requirements to noise level low-noise modifications are available (Centro L). Centro V2 is equipped with the two-speed asynchronous motor with external rotor and centrifugal dynamically balanced impeller with backward curved blades.
Due to compact design the fan is the ideal solution for mounting in limited spaces. Any mounting position. Wall or ceiling mounting with fixing brackets supplied as a standard or with a wire frame Halter Centro (available upon separate order). Flexible air ducts are fixed on the fan spigots with clamps.
|Parameter||Centro 125 L 50 Hz||Centro 125 L 60 Hz||Measurement unit|
|Maximum air flow||72||75||l/s|
|Maximum air flow||260||270||m³/h|
|Sound pressure level at 3 m||36||37||dBА|
|Max. operating temperature||-25...+55||-25...+50||°С|
|Motor IP rating||IP44||IP44||-|
|Ingress protection rating||IPX4||IPX4||-|
|Air duct||for round air ducts||for round air ducts||-|
|Type||Exhaust, Supply||Exhaust, Supply||-|
- Selection method:
- Air capacity:
- Air capacity: --
- Pressure: ---
|Model||Overall dimensions [mm]|
|Centro 125 L||125||250||270||220||30||27||30|
To comply with ErP 2018 it is necessary to use a speed controller and local demand control typology (connect the sensor).
|Sound power level, A-weighted||Total||Octave frequency bands [Hz]||LpA 3 m||LpA 1 m|
|LwA to inlet [dBA]||78||52||70||76||67||63||60||55||46||57||67|
|LwA to outlet [dBA]||77||59||70||75||66||60||58||53||45||56||66|
|LwA to environment [dBA]||56||27||40||48||51||50||50||40||28||36||46|
|Series||Duct diameter [mm]||Motor modifications||Options|
100; 125; 150*; 200; 250; 315
max: high-powered motor
L: low-powered motor
V2: two-speed motor
FR1: smooth speed controller adjustable from 0 to 100 % and power cable with mains plug
G1: speed controller, temperature controller with external temperature sensor, power cable with mains plug
GI1: speed controller, temperature controller with integrated temperature sensor and power cable mains plug
V: built-in speed switch (for two-speed models)
W1: power cable with mains plug
* Centro 150 (V2) model is compatible with the air ducts both Ø 150 and 160 mm