Mode | Frequency | ErP | SEC class | Heat exchanger material | Heat exchanger type | Heat recovery efficiency | Weight | Connected air duct diameter | Supply filter | Extract filter | Insulation | Casing material | Transported air temperature | Sound pressure level at 3 m | RPM | Maximum air flow | Maximum air flow | Max. unit current | Max. unit current without electric heater | Max. power without electric heater | Max. unit power | Voltage | Phase | Reheater power consumption | Electric heater current | Type | Mounting | Design | Connection diameter | Air duct | EC motor | Outdoor mounting | Sound-insulated casing | Power | Ingress protection rating | Current | Motor IP rating | Weight | Heat exchanger | Heating | Width | Height | Current | Humidity recovery efficiency | Maximum power consumption in "Heat Recovery" | Maximum power consumption in "Heat Recovery + Heat Pump" | Maximum power consumption in "Heat Recovery" | Air-handling unit energy efficiency "Heating" mode (COP) | Air-handling unit energy efficiency "Cooling" mode (ERR) | Coolant | Coolant weight | Heat output in "Heating" mode [kW] at t0 = +7 °C; tk = +45 °C* | Heat output in "Cooling" mode [kW] at t0 = +7 °C; tk = +45 °C* | Compressor type | Temperature setting range in "Cooling/Heating" | Heat output in "Cooling" mode [W] at t0 = +7 °C; tk = +45 °C | Maximum power consumption in "Heat Recovery + Heat Pump + Pre-Heating" | Current |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Iso-RB 400 (50 Hz) |
50 | 2018 | - | - | - | - | 78.5 | - | - | - | - | aluzinc | -25...+55 | 49 | 1451 | 1056 | 3800 | - | - | - | - | 230 | 1 | - | - | Exhaust, Supply | Inline | centrifugal | 400 | for round air ducts | no | no | yes | 427 | IPX4 | 1.87 | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 400 (60 Hz) |
60 | 2018 | - | - | - | - | 78.5 | - | - | - | - | aluzinc | -25...+55 | 50 | 1711 | 1139 | 4100 | - | - | - | - | 230 | 1 | - | - | Exhaust, Supply | Inline | centrifugal | 400 | for round air ducts | no | no | yes | 663 | IPX4 | 2.91 | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix EC 250 | 50 | 2018 | – | - | - | - | 15 | - | - | - | - | polymer-coated steel | -25...+55 | 42 | 2870 | 357 | 1285 | - | - | - | - | 230 | 1 | - | - | - | ceiling mounting, wall mounting, floor mounting | - | 250 | - | yes | - | - | 169 | IPX4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.38 |
Iso-Mix EC 200 | 50 | 2018 | – | - | - | - | 8 | - | - | - | - | polymer-coated steel | -25...+55 | 43 | 3390 | 289 | 1040 | - | - | - | - | 230 | 1 | - | - | - | ceiling mounting, wall mounting, floor mounting | - | 200 | - | yes | - | - | 123 | IPX4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.02 |
Iso-Mix EC 160 | 50 | 2018 | B | - | - | - | 6.3 | - | - | - | - | polymer-coated steel | -25...+55 | 38 | 3390 | 167 | 600 | - | - | - | - | 230 | 1 | - | - | - | ceiling mounting, wall mounting, floor mounting | - | 160 | - | yes | - | - | 55 | IPX4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.48 |
Iso-Mix EC 150 | 50 | 2018 | B | - | - | - | 6.1 | - | - | - | - | polymer-coated steel | -25...+55 | 38 | 3390 | 167 | 600 | - | - | - | - | 230 | 1 | - | - | - | ceiling mounting, wall mounting, floor mounting | - | 150 | - | yes | - | - | 55 | IPX4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.48 |
Iso-Mix EC 125 | 50 | 2018 | B | - | - | - | 4.6 | - | - | - | - | polymer-coated steel | -25...+55 | 43 | 3750 | 125 | 450 | - | - | - | - | 230 | 1 | - | - | - | ceiling mounting, wall mounting, floor mounting | - | 125 | - | yes | - | - | 40 | IPX4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.37 |
Iso-Mix EC 100 | 50 | 2018 | B | - | - | - | 4.6 | - | - | - | - | polymer-coated steel | -25...+55 | 37 | 3680 | 83 | 300 | - | - | - | - | 230 | 1 | - | - | - | ceiling mounting, wall mounting, floor mounting | - | 100 | - | yes | - | - | 30 | IPX4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.29 |
KOMFORT Roto EC LHP 900 S18 | 50 | - | - | aluminum | rotary | 85 | 165 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -10…+40 | 58 | - | 265 | 955 | 6.7 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.195 | 0.46 | 6.5 | 4.25 | R410A | 2 | 3.25 | - | Sealed, rotary type | +16...+30 | 2.5 | - | - |
KOMFORT Roto EC LHP 900 S17 | 50 | - | - | aluminum | rotary | 85 | 165 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -10…+40 | 58 | - | 265 | 955 | 6.7 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.195 | 0.46 | 6.5 | 4.25 | R410A | 2 | 3.25 | - | Sealed, rotary type | +16...+30 | 2.5 | - | - |
KOMFORT Roto EC LHP 700 S18 | 50 | - | - | aluminum | rotary | 85 | 160 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -10…+40 | 52 | - | 231 | 830 | 5.7 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.94 | 0.36 | 6.5 | 4.15 | R410A | 1.0 | 2.6 | - | Sealed, rotary type | +16...+30 | 2 | - | - |
KOMFORT Roto EC LHP 700 S17 | 50 | - | - | aluminum | rotary | 85 | 160 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -10…+40 | 52 | - | 231 | 830 | 5.7 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.94 | 0.36 | 6.5 | 4.15 | R410A | 1.0 | 2.6 | - | Sealed, rotary type | +16...+30 | 2 | - | - |
KOMFORT Roto EC LHP 400 S18 | 50 | - | - | aluminum | rotary | 85 | 150 | 160 | G4 (Option: F7) | G4 | - | aluzinc | -10…+40 | 45 | - | 53 | 520 | 4.6 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.745 | 0.31 | 6 | 4 | R410A | 0.8 | 1.56 | - | Sealed, rotary type | +16...+30 | 1.2 | - | - |
KOMFORT Roto EC LHP 400 S17 | 50 | - | - | aluminum | rotary | 85 | 150 | 160 | G4 (Option: F7) | G4 | - | aluzinc | -10…+40 | 45 | - | 53 | 520 | 4.6 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.745 | 0.31 | 6 | 4 | R410A | 0.8 | 1.56 | - | Sealed, rotary type | +16...+30 | 1.2 | - | - |
KOMFORT Roto EC LEHP 900 S18 | 50 | - | - | aluminum | rotary | 85 | 165 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -25…+40 | 58 | - | 265 | 955 | 19.4 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.195 | 0.46 | 6.5 | 4.25 | R410A | 2 | 3.25 | - | Sealed, rotary type | +16...+30 | 2.5 | 3.995 | - |
KOMFORT Roto EC LEHP 900 S17 | 50 | - | - | aluminum | rotary | 85 | 165 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -25…+40 | 58 | - | 265 | 955 | 19.4 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.195 | 0.46 | 6.5 | 4.25 | R410A | 2 | 3.25 | - | Sealed, rotary type | +16...+30 | 2.5 | 3.995 | - |
KOMFORT Roto EC LEHP 700 S18 | 50 | - | - | aluminum | rotary | 85 | 160 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -25…+40 | 52 | - | 231 | 830 | 18.5 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.94 | 0.36 | 6.5 | 4.15 | R410A | 1.0 | 2.6 | - | Sealed, rotary type | +16...+30 | 2 | 3.74 | - |
KOMFORT Roto EC LEHP 700 S17 | 50 | - | - | aluminum | rotary | 85 | 160 | 250 | G4 (Option: F7) | G4 | - | aluzinc | -25…+40 | 52 | - | 231 | 830 | 18.5 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.94 | 0.36 | 6.5 | 4.15 | R410A | 1.0 | 2.6 | - | Sealed, rotary type | +16...+30 | 2 | 3.74 | - |
KOMFORT Roto EC LEHP 400 S18 | 50 | - | - | aluminum | rotary | 85 | 150 | 160 | G4 (Option: F7) | G4 | - | aluzinc | -25…+40 | 45 | - | 53 | 520 | 10.9 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.745 | 0.31 | 6 | 4 | R410A | 0.8 | 1.56 | - | Sealed, rotary type | +16...+30 | 1.2 | 2.145 | - |
KOMFORT Roto EC LEHP 400 S17 | 50 | - | - | aluminum | rotary | 85 | 150 | 160 | G4 (Option: F7) | G4 | - | aluzinc | -25…+40 | 45 | - | 53 | 520 | 10.9 | - | - | - | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.745 | 0.31 | 6 | 4 | R410A | 0.8 | 1.56 | - | Sealed, rotary type | +16...+30 | 1.2 | 2.145 | - |
KOMFORT Ultra EC L2 300-E S14 white | 50/60 | 2016, 2018 | A | enthalpy | cross-flow | 51...73 | 28 | - | F8, G4 | G4 | 20 mm mineral wool | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | ceiling mounting, wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | 26...45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC L2 300-E S2 white | 50/60 | 2016, 2018 | C | enthalpy | cross-flow | 51...73 | 28 | - | F8, G4 | G4 | - | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | ceiling mounting, wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | 26...45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC L2 300-H S14 white | 50/60 | 2016, 2018 | A | polystyrene | cross-flow | 55...79 | 32 | - | F8, G4 | G4 | 20 mm mineral wool | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC L2 300-H S2 white | 50/60 | 2016, 2018 | B | polystyrene | cross-flow | 55...79 | 32 | - | F8, G4 | G4 | 20 mm mineral wool | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC S2 300-E S14 white | 50/60 | 2016, 2018 | A | enthalpy | cross-flow | 51...73 | 28 | - | F8, G4 | G4 | 20 mm mineral wool | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | ceiling mounting, wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | 26...45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC S2 300-E S2 white | 50/60 | 2016, 2018 | C | enthalpy | cross-flow | 51...73 | 28 | - | F8, G4 | G4 | 20 mm mineral wool | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | ceiling mounting, wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | 26...45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC S2 300-H S14 white | 50/60 | 2016, 2018 | A | polystyrene | cross-flow | 55...79 | 32 | - | F8, G4 | G4 | 20 mm mineral wool | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra EC S2 300-H S2 white | 50/60 | 2016, 2018 | B | polystyrene | cross-flow | 55...79 | 32 | - | F8, G4 | G4 | 20 mm mineral wool | - | -25...+40 | 33 | - | 83 | 300 | - | - | - | - | 230 | 1 | - | - | Supply and exhaust | wall mounting, floor mounting | - | 125 | for round air ducts | yes | no | yes | 165 | - | - | - | - | - | - | - | - | 1.3 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 450-4D | 50 | 2016 | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 59 | 1490 | 1808 | 6510 | - | - | - | - | 400 | 3 | - | - | Exhaust, Supply | Inline | mixed-flow | 450 | for round air ducts | no | no | yes | 1230 | IPX4 | 3.43 | IP44 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 450-4E | 50 | 2016 | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 59 | 1475 | 1739 | 6260 | - | - | - | - | 230 | 1 | - | - | Exhaust, Supply | Inline | mixed-flow | 450 | for round air ducts | no | no | yes | 1200 | IPX4 | 7.72 | IP44 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 50 | 1490 | 1020 | 3670 | - | - | - | - | 400 | 3 | - | - | Exhaust, Supply | Inline | mixed-flow | 400 | for round air ducts | no | no | yes | 590 | IPX4 | 1.78 | IP44 | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 400-4E | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 50 | 1480 | 985 | 3545 | - | - | - | - | 230 | 1 | - | - | Exhaust, Supply | Inline | mixed-flow | 400 | for round air ducts | no | no | yes | 580 | IPX4 | 3.43 | IP44 | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 355-4D | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 49 | 1490 | 953 | 3430 | - | - | - | - | 400 | 3 | - | - | Exhaust, Supply | Inline | mixed-flow | 355 | for round air ducts | no | no | yes | 585 | IPX4 | 1.77 | IP44 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 355-4E | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 49 | 1480 | 920 | 3310 | - | - | - | - | 230 | 1 | - | - | Exhaust, Supply | Inline | mixed-flow | 355 | for round air ducts | no | no | yes | 578 | IPX4 | 3.42 | IP44 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mix-E 500-4D | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 73 | 1455 | 3306 | 11900 | - | - | - | - | 400 | 3 | - | - | - | Inline | mixed-flow | 500 | for round air ducts | no | no | no | 2125 | IPX4 | 4.68 | IP44 | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mix-E 450-4D | 50 | 2016 | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 65 | 1490 | 1843 | 6635 | - | - | - | - | 400 | 3 | - | - | - | Inline | mixed-flow | 450 | for round air ducts | no | no | no | 1230 | IPX4 | 3.43 | IP44 | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mix-E 450-4E | 50 | 2016 | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 65 | 1475 | 1774 | 6385 | - | - | - | - | 230 | 1 | - | - | - | Inline | mixed-flow | 450 | for round air ducts | no | no | no | 1200 | IPX4 | 7.72 | IP44 | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mix-E 400-4D | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 58 | 1490 | 1039 | 3740 | - | - | - | - | 400 | 3 | - | - | - | Inline | mixed-flow | 400 | for round air ducts | no | no | no | 590 | IPX4 | 1.78 | IP44 | 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 58 | 1480 | 1003 | 3610 | - | - | - | - | 230 | 1 | - | - | - | Inline | mixed-flow | 400 | for round air ducts | no | no | no | 580 | IPX4 | 3.43 | IP44 | 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Mix-E 355-4D | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 57 | 1490 | 967 | 3480 | - | - | - | - | 400 | 3 | - | - | - | Inline | mixed-flow | 355 | for round air ducts | no | no | no | 585 | IPX4 | 1.77 | IP44 | 22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 50 | - | - | - | - | - | - | - | - | - | - | polymer-coated steel | -25...+60 | 57 | 1480 | 928 | 3340 | - | - | - | - | 230 | 1 | - | - | - | Inline | mixed-flow | 355 | for round air ducts | no | no | no | 578 | IPX4 | 3.42 | IP44 | 22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 500 (Y) | 50 | 2018 | - | - | - | - | 129 | - | - | - | - | aluzinc | -25...+55 | 54 | 948 | 1867 | 6720 | - | - | - | - | 400 | 3 | - | - | Exhaust, Supply | Inline | centrifugal | 500 | for round air ducts | no | no | yes | 780 | IPX4 | 1.60 | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 500 (Δ) | 50 | 2018 | - | - | - | - | 129 | - | - | - | - | aluzinc | -25...+55 | 56 | 980 | 1945 | 7000 | - | - | - | - | 230 | 1 | - | - | Exhaust, Supply | Inline | centrifugal | 500 | for round air ducts | no | no | yes | 730 | IPX4 | 2.82 | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-RB 450 L | 50 | 2018 | - | - | - | - | 84 | - | - | - | - | aluzinc | -25...+55 | 50 | 1350 | 1042 | 3750 | - | - | - | - | 230 | 1 | - | - | Exhaust, Supply | Inline | centrifugal | 450 | for round air ducts | no | no | yes | 482 | IPX4 | 2.13 | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC DE250 S18 | 50/60 | 2016, 2018 | A | aluminum | rotary | 71–87 | 56 | 160 | G4 + F7 (Option: H13) | G4 | 40 mm mineral wool | painted steel | -25...+40 | 21 | 2200 | 86 | 310 | 4.1 | 1.0 | 135 | 835 | 230 | 1 | 700 | 3.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D2E250 S17 | 50/60 | 2016, 2018 | A | aluminum | rotary | 72–87 | 54 | 160 | G4 + F7 (Option: H13) | G4 | 20 mm mineral wool | painted steel | -25...+40 | 23 | 2200 | 83 | 300 | 4.0 | 0.9 | 128 | 828 | 230 | 1 | 700 | 3.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D2E250 S18 | 50/60 | 2016, 2018 | A | aluminum | rotary | 72–87 | 54 | 160 | G4 + F7 (Option: H13) | G4 | 20 mm mineral wool | painted steel | -25...+40 | 23 | 2200 | 83 | 300 | 4.0 | 0.9 | 128 | 828 | 230 | 1 | 700 | 3.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D250 S17 | 50/60 | 2016, 2018 | A | aluminum | rotary | 71–87 | 55 | 160 | G4 + F7 (Option: H13) | G4 | 40 mm mineral wool | painted steel | -25...+40 | 21 | 2200 | 86 | 310 | 1.0 | 1.0 | 135 | 135 | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D250 S18 | 50/60 | 2016, 2018 | A | aluminum | rotary | 71–87 | 55 | 160 | G4 + F7 (Option: H13) | G4 | 40 mm mineral wool | painted steel | -25...+40 | 21 | 2200 | 86 | 310 | 1.0 | 1.0 | 135 | 135 | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC DE250 S17 | 50/60 | 2016, 2018 | A | aluminum | rotary | 71–87 | 56 | 160 | G4 + F7 (Option: H13) | G4 | 40 mm mineral wool | painted steel | -25...+40 | 21 | 2200 | 86 | 310 | 4.1 | 1.0 | 135 | 835 | 230 | 1 | 700 | 3.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D2 350 S18 | 50/60 | 2016, 2018 | A | aluminum | rotary | 73–87 | 78 | 160 | G4 + F7 (Option: H13) | G4 | 20 mm mineral wool | painted steel | -25...+40 | 33 | 3200 | 111 | 400 | 1.3 | 1.3 | 200 | 200 | 230 | 1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |